What car is the slanted H logo?

How much horsepower does the Infiniti Q70 have?

The Infiniti Q70's engine has 211 horsepower. The Infiniti Q70 is a mid-to-large luxury sedan, equipped with a 2.0-liter turbocharged engine across the entire lineup. This engine is the same as the 2.0-liter turbocharged engine found in the Q50L. The 2.0-liter turbocharged engine in the Infiniti Q70 delivers a maximum power of 155 kW, a maximum torque of 350 Nm, with the maximum power achieved at 5,500 rpm and the maximum torque available between 1,500 to 3,500 rpm. It features direct fuel injection technology, uses an aluminum alloy cylinder head and block, and is paired with a 7-speed automatic transmission.

10

5

Share

VTEC Oil Pressure Switch Circuit Too High?

VTEC oil pressure switch circuit being too high may be due to the need for an oil change or a faulty VTEC solenoid valve. 1. Reasons for VTEC oil pressure switch circuit being too high: The need for an oil change and a faulty VTEC solenoid valve. If the solenoid valve fails to open, oil cannot enter the rocker arm chamber, keeping the rocker arm oil pressure switch in a closed state, which results in excessively high voltage in the switch circuit. 2. Inspection and repair: (1) Check if the solenoid valve's ground and power supply wires are shorted to the positive terminal. (2) Verify whether the pressure signal feedback from the pressure switch is normal. (3) Check if the solenoid valve is functioning properly. (4) Inspect if the pressure switch is operating correctly. (5) Examine the oil pressure in the VTEC system's oil passages.

17

1

Share

At how many kilometers should the second vehicle maintenance be performed?

Vehicle second maintenance is performed at around 10,000 kilometers. Below is an introduction to car maintenance knowledge: 1. Meaning: The second-level maintenance of a vehicle refers to inspection and adjustment-centered maintenance operations performed on motor vehicles that have traveled a certain mileage. 2. Maintenance scope: Inspect and adjust the working condition of the engine and electrical equipment, dismantle and clean the oil pan and oil filter, inspect and adjust the steering and braking mechanisms, dismantle and clean the front and rear wheel hub bearings. Add lubricating oil, dismantle and inspect tires, and perform tire rotation. 3. Maintenance purpose: Maintain various parts, mechanisms, and assemblies of the vehicle to ensure they have good working performance and normal operation.

16

1

Share

How to Switch Between Hybrid Modes?

Hybrid vehicles are automatically controlled by the computer system. The engine will engage when the car reaches a certain speed, and you can also manually switch between hybrid mode and pure electric mode. Advantages of hybrid vehicles: 1. Fuel efficiency—in congested urban areas, the internal combustion engine can be turned off, allowing the battery to power the car, which also reduces pollutant emissions. 2. With a battery, the car can efficiently recover energy during braking, idling, and downhill driving. 3. Being a hybrid, you don’t have to worry about the high energy consumption issues faced by pure electric vehicles, such as air conditioning and heating. 4. Strong starting power—during acceleration, the electric motor in a hybrid car can effectively compensate for the low-torque weakness of the internal combustion engine at low speeds.

20

4

Share

What is the front brake type of the Infiniti Q60?

The front brake type of the Infiniti Q60 is ventilated disc. Ventilated disc brakes utilize centrifugal force generated during vehicle motion to create air convection, achieving effective heat dissipation. Externally, they feature numerous holes drilled toward the center around the circumference. These holes are manufactured through a specialized process, providing significantly better cooling performance compared to standard solid disc brakes. The Infiniti Q60 is a sports car under the Infiniti brand, equipped with a 2.0-liter turbocharged engine across all variants. It delivers a maximum power output of 211 horsepower and a peak torque of 350 Newton-meters. The engine reaches its maximum power at 5,500 RPM, while the maximum torque is available between 1,500 to 3,500 RPM. The vehicle is paired with a 7-speed automatic transmission (7AT).

12

5

Share

What engine does the Infiniti Q60S use?

Infiniti Q60S uses a 3.7-liter V6 naturally aspirated engine with a maximum power of 258kW, peak torque of 363Nm, maximum power speed of 7000rpm, and maximum torque speed of 5200rpm, paired with a 7-speed automatic manual transmission. The Infiniti Q60S is a business sedan under the Infiniti brand, positioned as a mid-size car with dimensions of 4653mm in length, 1823mm in width, and 1395mm in height, and a wheelbase of 2850mm. Available body colors include Emerald Black, Obsidian Black, Tungsten Gray, Topaz Brown, Coral Red, and Pearl White.

2

0

Share

What car is the slanted H logo?

How much horsepower does the Infiniti Q70 have?

VTEC Oil Pressure Switch Circuit Too High?

At how many kilometers should the second vehicle maintenance be performed?

How to Switch Between Hybrid Modes?

What is the front brake type of the Infiniti Q60?

What engine does the Infiniti Q60S use?

What Causes Engine Coolant Leakage?

Where is the Civic's Radiator Located?

Is there an imported version of the Infiniti Q50?

Can HanTang Electric Vehicles Be Licensed?