What car is the Mustang snake logo?

What Does Pedestrian Protection System Malfunction Mean?

Pedestrian protection system is designed to automatically pop up the hood when the vehicle collides with a pedestrian. A pedestrian protection system malfunction indicates that the hood fails to issue a warning when the vehicle hits a pedestrian. Method to reset the pedestrian protection device warning light: First, start the engine; Press and hold the "TRIP" button without releasing until the mileage and "OIL-LIFE" start flashing, then release the button; Sometimes it may require pressing and releasing the button several times to clear the pedestrian protection device warning light. For the most basic pedestrian protection technology, it mainly involves the application of energy-absorbing materials on the vehicle body, such as energy-absorbing bumpers, soft hood materials, and headlights and accessories without sharp edges. Among these, adopting a buffering structure design on the engine hood section is a relatively common practice among domestic automobile manufacturers.

5

4

Share

What are the reasons for being unable to open the car door after unlocking?

The main reasons for being unable to open the car door after unlocking are either a faulty exterior door handle cable or a malfunctioning door lock mechanism. Below are some introductions about remote keys: The working methods of remote keys can be divided into three categories based on their usage: active working mode, passive working mode, and coil induction mode. Extended content: 1. The car will compare the received signal with the information stored internally. If the verification is successful, the car will unlock the door. Once the driver enters the car, simply pressing the start button will start the car engine. 2. When the button is triggered, the PKE system first needs to detect whether the "key" device is inside the car, and then complete the same authentication process before starting the engine. When the driver leaves the car, simply pressing the door handle will lock the car door. Before the car is actually locked, it will also detect the driver's position and go through the same verification process.

14

5

Share

What Are the Factors Affecting Car Paint?

Factors affecting car paint mainly include natural environmental causes, ultraviolet rays, dirt, acid rain, etc. To prevent the deterioration of car paint, it is necessary to isolate the paint from the external environment, prevent external substances from oxidizing the paint, block the volatilization of oily components in the paint, and maintain the initial appearance of the paint for a long time. Extended content: 1. Car paint is a protective film sprayed on the car, which is a type of coating that makes the car body less susceptible to corrosion and gives an aesthetic evaluation. Different car paints have different effects, and the quality of the paint itself, technology, and a good painting environment are crucial. 2. The main characteristics of car paint performance: good fullness of the paint film, high gloss, high hardness, good adhesion, excellent mechanical properties of the paint film, excellent gloss retention, weather resistance, wear resistance, and good resistance to acid, alkali, alcohol, and gasoline.

4

Share

Should a scooter use 90 or 140 gear oil?

For common scooters, many manufacturers recommend using 80W-90 gear oil. Here is relevant information about 75w90 gear oil: Classification of gear oil: 75w90 gear oil is one specification of gear oil. Ordinary vehicle gear oils are divided into three viscosity grades: 80W/90, 85W/90, and 90. Medium-duty vehicle gear oils have five viscosity grades: 75W, 80W/90, 85W/90, 90, and 85W/40. Heavy-duty vehicle gear oils also have five viscosity grades: 75W, 80W/90, 85W/90, 90, and 85W/40. Gear oils can be divided into two categories: automotive gear oil and industrial gear oil. Applications of gear oil: Automotive gear oil is used to lubricate various manual transmissions and gear drive shafts in vehicles, while industrial gear oil is used to lubricate gear devices in industries such as metallurgy, coal mining, cement, and chemical processing.

7

4

Share

How many days does it take to drive 3000 kilometers?

Calculating based on a driving speed of 100 kilometers per hour on the highway, 3000 kilometers would take approximately 30 hours. According to regulations, the minimum speed on the highway cannot be lower than 60 kilometers per hour, and the maximum speed cannot exceed 120 kilometers per hour. There is no unified speed limit for lanes on the highway, and different sections may have different speed limits. Drivers can follow the navigation prompts or highway signs for guidance. Relevant information about speed limits is as follows: 1. Introduction to speed limits: Speed limits generally refer to the regulation of vehicle speeds within a certain numerical range over a specified distance. 2. Purpose of speed limits: The main purpose is to preemptively remind drivers to control their speed reasonably in subsequent sections of the road, prevent the dangers of speeding, and ensure driving safety. Speed limits are an indispensable and most important aspect of road transport safety.

20

4

Share

What Causes the Jerking Sensation When Shifting to R Gear in an Automatic Car?

Automatic car shifting to R gear has a jerking sensation due to a damaged solenoid valve causing the jerk. The reason for the jerk is that if there is sludge in the circulating transmission fluid blocking the oil passages in the valve body, it can lead to stumbling issues, resulting in a series of transmission problems such as high temperature, impact, and slippage. Other reasons for jerking sensations: 1. Upshift jerk: The transmission's response speed is not fast enough, and the upshift speed cannot keep up with the acceleration pedal's speed, so at the moment the transmission shifts, a jerking sensation occurs. 2. Downshift jerk: Due to the intervention of the energy recovery system, once the driver releases the accelerator pedal or presses the brake pedal, the generator immediately starts working, which burdens the engine, affecting the engine speed and causing it to be out of sync with the clutch plate speed, resulting in a jerking sensation.

17

0

Share

What car is the Mustang snake logo?

What Does Pedestrian Protection System Malfunction Mean?

What are the reasons for being unable to open the car door after unlocking?

What Are the Factors Affecting Car Paint?

Should a scooter use 90 or 140 gear oil?

How many days does it take to drive 3000 kilometers?

What Causes the Jerking Sensation When Shifting to R Gear in an Automatic Car?

What does D321 in automatic transmission mean?

How to Check the Car Air Conditioning Controller?

Reasons for occasional popping sound in Kawasaki Z650 engine?

When Can You Wash the Car After Painting?