What car is the mblo key for?

1 Answers
VanAnthony
07/29/25 5:24pm
mblo key is for an electric vehicle. Typically, a car comes with two keys: one for regular use and the other as a spare. Here is an introduction to electric vehicles: 1. Introduction: Electric vehicles refer to cars that use electrical energy as a power source and are driven by electric motors. They belong to the category of new energy vehicles, including pure electric vehicles (BEV), hybrid electric vehicles (HEV), and fuel cell electric vehicles (FCEV). Due to their relatively smaller environmental impact compared to traditional vehicles, they have broad development prospects, although the technology is not yet mature. 2. Types: The types of electric vehicles include pure electric vehicles (BEV), hybrid electric vehicles (HEV), and fuel cell electric vehicles (FCEV). 3. Advantages: The technology is relatively simple and mature, and they can be charged wherever there is a power supply.
Was this review help?
13
2
Share
More Forum Discussions

What brand is the Passat's audio system?

The Passat's audio system is the American FENDER brand. The most basic requirement for a car audio system is the ability to reproduce sound, which mainly includes three parts: the head unit, speakers, and amplifier. The most direct way to judge the quality of an audio head unit is to look at its technical specifications. The technical indicators of car audio systems include: 1. Output power: Currently, most head units indicate music power, ranging between 40W and 60W, and the power should not be too large. 2. Frequency response: The frequency range that the human ear can hear is between 20Hz and 20KHz, so this indicator should at least reach this range, and the wider the better. 3. Signal-to-noise ratio: This refers to the ratio of music signal to noise. Generally, high-end car audio systems are above 90DB, and the higher this value, the better. 4. Harmonic distortion: This indicator reflects the fidelity of sound reproduction. The smaller the value, the higher the fidelity, and the better the audio effect.
13
3
Share

Does the Driving Test Reform Affect Those Who Haven't Completed Their Tests?

No impact, as long as all subjects are completed within 3 years after passing Subject 1, there will be no problem. If not completed or failed, then you will have to retake according to the new regulations. The following are the conditions for obtaining a driver's license: 1. Height: Must meet the vehicle type requirements. 2. Vision: No color blindness. 3. Hearing: Normal hearing. 4. Limbs: Healthy limbs, torso, and thumbs on both hands, with at least three other fingers healthy on each hand. 5. Motor function: Normal motor function in upper and lower limbs. Below is additional information for registering for the driver's license test: 1. Photos: Seven 1-inch color photos with a white background. 2. Registration fee: Cash, card, or bank transfer. 3. ID copy: A copy of the ID card is required, with both sides copied onto one sheet of paper. 4. Household registration copy: For non-local residents, a residence permit is also required.
18
3
Share

What is the difference between a vehicle's production date and manufacturing date?

Here are the differences between a vehicle's production date and manufacturing date: 1. Time: For the most advanced automobile manufacturers using modern production models, these two concepts are essentially the same definition with no significant difference. If a distinction must be made: the former refers to the exact time the vehicle is produced, while the latter represents the time when the vehicle moves from the production line to market sales. 2. On the body and certificate of conformity: All multinational automotive giants follow the principle of minimum origin price and global configuration. What you generally see on the body and certificate of conformity is the vehicle's production date (manufacturing date). 3. Exceeding 6 months: Vehicles that have been in inventory for no more than 6 months from production to delivery are not considered stock cars. Some consumers have overly strict requirements, refusing vehicles older than 3 months, which is incorrect. This is because vehicles undergo processes like storage, transportation, and allocation after production, making 6 months a reasonable timeframe.
6
2
Share

What are the reasons for insufficient cooling of the BYD F0 air conditioning?

The reasons for insufficient cooling of the BYD F0 air conditioning are: 1. Check if there is a lack of refrigerant; 2. Aging compressor in vehicles over five years old; 3. Aging air conditioning compressor belt; 4. Compressor failure; 5. Air filter not replaced for over three years, leading to clogging. The solutions for insufficient cooling of the BYD F0 air conditioning are: 1. Add air conditioning refrigerant; 2. Replace the compressor belt or compressor; 3. Inspect components in the car's air conditioning system such as pipelines, air conditioning pump, condenser, and evaporator box for damage causing refrigerant leakage; 4. Clean or replace the air filter. The 2015 BYD F0 Xuan Cool model features a front MacPherson strut independent suspension and a rear torsion beam trailing arm suspension. It is equipped with a 1.0L naturally aspirated engine, delivering a maximum horsepower of 68 PS, a maximum power of 50 kW, and a maximum torque of 90 Nm, paired with a 5-speed manual transmission.
12
5
Share

What Causes Hard Brake Pedal and Ineffective Braking?

Brake line air or oil leakage, faulty brake master cylinder causing soft braking, or excessively thin brake pads. Below is expanded information: 1. Brake Definition: Braking, also called deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The general principle involves fixing a wheel or disc on the machine's high-speed shaft and installing matching brake shoes, bands, or discs on the machine base to generate braking torque under external force. The brake device is a mechanical deceleration mechanism, also known as a retarder. The car brake pedal is located below the steering wheel. Pressing it activates the brake linkage, transmitting pressure to the brake shoes on the brake drum, which then clamp the brake disc to slow or stop the vehicle. The manual brake (handbrake) is beside the gearshift, connected to the brake rod. 2. Brake Master Cylinder: The brake master cylinder, also called the main hydraulic cylinder, primarily functions to push brake fluid to individual wheel cylinders to actuate the pistons.
7
4
Share

Is the electronic parking brake pushed down or pulled up?

For the electronic parking brake, pushing down turns it off, while pulling up activates it. The usage method of the electronic parking brake is as follows: 1. To engage the electronic parking brake, step on the brake pedal and pull up the electronic parking brake switch until the indicator light on the dashboard illuminates, and the switch's indicator light also turns on; 2. To disengage the electronic parking brake, press the electronic parking brake switch while keeping the brake pedal depressed, and the indicator lights on the dashboard and the switch will turn off. The structural principle of the electronic parking brake involves the application of electronic parking brake technology in automobiles, specifically the caliper-integrated electronic parking brake system. This system replaces traditional parking brake levers, mechanical linkages, and cables with electronic buttons and motor components. When parking, after the driver operates the electronic parking brake system's button, the electronic control unit commands the motors integrated into the left and right brake calipers to act, driving the brake caliper pistons to move and generate mechanical clamping force, thereby completing the parking process.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.