What car is the freema from Haima?

Where is the air conditioning filter located in the Honda Inspire?

The air conditioning filter in the Honda Inspire is located inside the glove compartment on the passenger side. You need to remove the glove compartment to access it. The replacement interval varies depending on the vehicle model, usage conditions, and road conditions. If you frequently drive in dusty areas, it's recommended to replace the filter every six months to a year. Below is a step-by-step guide for replacing the air conditioning filter in the Honda Inspire (note that procedures may vary for different models): 1. Remove or pull out the glove compartment in front of the passenger seat. 2. Inside, you'll find a black cover panel - remove this panel. 3. After opening, take out the air conditioning filter. If it's not too dirty, you can clean it with compressed air or a blower; if it's heavily soiled, replacement is recommended to prevent bacterial growth. 4. Install the new air conditioning filter, paying attention to the arrow on the filter which should point downward. 5. Close the filter housing and reinstall the glove compartment.

12

3

Share

What does each part of a vehicle VIN represent?

Each part of a vehicle VIN represents: 1. The first section: Identifies the vehicle manufacturer, consisting of the first three digits. The first digit indicates the country/region of origin; the second digit identifies the vehicle manufacturer; the third digit identifies the manufacturer's division or conventional vehicle type. 2. The second section: Five digits (positions 4 to 8) describe the vehicle. Codes from position 4 to 8 may also indicate the transmission type, vehicle class, or other features such as seat belts and airbags. 3. The third section: The ninth digit is always a check digit. The correct check digit is obtained through a series of calculations based on other digits in the VIN. 4. The fourth section: The tenth digit is the model year code; the eleventh digit is the plant code, indicating the assembly plant of the vehicle. 5. The fifth section: The last six digits (positions 12 to 17) are the production sequence number, though some small manufacturers producing fewer than 500 vehicles per year use positions 12, 13, and 14 as additional manufacturer identification codes.

17

3

Share

Is it necessary to shift to neutral when parking a car?

It is not mandatory to shift to neutral when parking a car. The parking methods are as follows: 1. For automatic transmission: Press the brake pedal to bring the car to a smooth stop, shift from D (Drive) to N (Neutral), engage the handbrake, press the brake pedal while shifting from N to P (Park), release the foot brake, press the one-button start/stop to turn off the power; 2. For manual transmission: Gently press the brake pedal to reduce speed, press the clutch, shift to neutral after coming to a complete stop, engage the handbrake, and turn off the engine. Precautions for parking a car include: 1. Turn off all electrical equipment inside the car before shutting down the engine to prevent battery drain from prolonged use; 2. Choose a parking spot that does not obstruct others, affecting the next drive; 3. Use turn signals before parking and observe surrounding vehicles and pedestrians.

12

2

Share

What does PDU mean in new energy vehicles?

Electric vehicle PDU refers to the high-voltage power distribution box of electric vehicles. Its function is to electrically connect high-voltage components through busbars and wiring harnesses, providing charging and discharging control, power-on control for high-voltage components, circuit overload and short-circuit protection, high-voltage sampling, low-voltage control, etc., for the high-voltage system of new energy vehicles, protecting and monitoring the operation of the high-voltage system. Below is extended information about PDU: 1. Module functions: PDU can also integrate functions such as the BMS main control, charging module, DC module, PTC control module, etc. Compared with traditional PDUs, it includes more vehicle function modules, is more integrated in functionality, more complex in structure, and has cooling structures such as water cooling or air cooling. PDU is flexibly configurable and can be customized according to customer requirements, meeting the needs of different customers for various vehicle models. 2. Advantages: The entire distribution box adopts sheet metal or aluminum alloy housing with excellent heat dissipation and vibration resistance, with high safety and waterproof sealing levels. It also has significant advantages in lifespan, power consumption, size, and weight.

3

0

Share

What are the differences between CIIMO and CIVIC?

In fact, CIIMO is the older version of CIVIC, a rebadged model based on the eighth-generation CIVIC. The main differences between CIIMO and CIVIC are: 1. Different engines. The CIIMO engine is a 1.8L L4; the CIVIC engine is a 1.5T L4. 2. Different intake forms. The CIIMO intake form is naturally aspirated; the CIVIC intake form is turbocharged. 3. Different maximum horsepower. The CIIMO maximum horsepower is 140ps; the CIVIC maximum horsepower is 177ps. 4. Different maximum torque. The CIIMO maximum torque is 174nm; the CIVIC maximum torque is 220nm. 5. Different dimensions. The CIIMO length, width, and height are 4530mm, 1755mm, and 1460mm respectively; the CIVIC length, width, and height are 4517mm, 1799mm, and 1434mm respectively.

5

0

Share

What to Do When a Car's Chassis Hits a Step?

Here are the solutions for when a car's chassis hits a step: 1. Cars are designed with a certain level of impact resistance in the chassis: The most vulnerable parts of the chassis are the various pipes, such as the brake hydraulic pipes and fuel pipes, but these pipes are hidden and protected in the grooves of the chassis steel plate and do not protrude above the chassis level. 2. If the chassis gets stuck on a step: The chassis steel plate will make flat contact with the step, so the pipes hidden in the grooves of the steel plate will not be damaged. 3. If it hits a protruding stone on the ground: The impact is point-like, and the protruding stone is likely to hit the pipes in the grooves, causing oil or fluid leaks, which can be more harmful. 4. If the pipes are not damaged and only the steel plate is scratched, applying some paint to prevent rust is sufficient. If the pipes are damaged, a thorough inspection and repair are necessary. 5. To prevent severe damage from impacts, you can spray the car's chassis with an undercoating or install an engine guard plate.

12

3

Share

What car is the freema from Haima?

Where is the air conditioning filter located in the Honda Inspire?

What does each part of a vehicle VIN represent?

Is it necessary to shift to neutral when parking a car?

What does PDU mean in new energy vehicles?

What are the differences between CIIMO and CIVIC?

What to Do When a Car's Chassis Hits a Step?

How to adjust the time on a Bora?

Must Pickup Trucks Weigh In Before Entering Highways?

Where to Check Tire Pressure for Nissan Sylphy Classic?

Where is the emergency trunk release switch for the Mercedes-Benz C200?