What car is the double m?

1 Answers
StNoah
07/29/25 11:19pm
Double m refers to Maybach, an ultra-luxury brand under Mercedes-Benz. Additional information is as follows: Maybach S-Class: The Maybach S-Class is equipped with three engines: a 3.0-liter twin-turbocharged engine, a 4.0-liter twin-turbocharged engine, and a 6.0-liter twin-turbocharged engine. The 3.0-liter twin-turbocharged engine has a maximum power of 270 kW, a maximum torque of 500 Nm, a maximum power speed of 5500 rpm, and a maximum torque speed range of 1800 to 4500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The 4.0-liter twin-turbocharged engine has a maximum power of 346 kW, a maximum torque of 700 Nm, a maximum power speed of 5250 rpm, and a maximum torque speed range of 2000 to 4000 rpm. This engine also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The 6.0-liter twin-turbocharged engine has a maximum power of 463 kW, a maximum torque of 1000 Nm, a maximum power speed of 4800 rpm, and a maximum torque speed range of 2300 to 4200 rpm. This engine employs multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. The maximum torque of this engine reaches 1000 Nm.
Was this review help?
16
4
Share
More Forum Discussions

What Causes Blue Smoke from the Engine?

The reasons for blue smoke from the engine are as follows: 1. Valves: Due to aging valve seals and loss of rubber elasticity, the sealing becomes poor, allowing engine oil to seep into the combustion chamber and burn, thus being consumed. The symptom is a puff of blue smoke when starting the engine for the first time in the morning, which quickly disappears after the engine warms up. 2. Cylinder Liner: Due to wear of the cylinder liner, insufficient tension of the piston rings, or misalignment of the piston rings, the symptom is blue smoke appearing when the engine exceeds 3000 RPM, whether the engine is cold or hot. The amount of blue smoke depends on the degree of wear. More related information follows: Recommendation: Inspect and carry out repairs; it may not necessarily require a major overhaul. If the cylinder liner wear is not severe, replacing the piston rings and valve seals may suffice.
20
3
Share

What are the tire model and brand for Mazda CX-4?

There are two types of tire models for the Mazda CX-4: 225/55R19 and 225/65R19. The first number, 225, indicates that the tire width is 225MM. The number 55 represents the aspect ratio of the tire section, which is 55%, meaning the section height is 55% of the width. The letter R stands for radial tire, and 19 indicates the rim diameter is 19 inches. The Mazda CX-4 has a top speed of 192km/h and a fuel consumption of 6.3L per 100 kilometers. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings of the tire, ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim size compatible with the tire, facilitating practical use, such as "Standard Rim 5.00F".
3
1
Share

What Causes the Rear of the Car to Cross the Line During Parallel Parking?

The frequent crossing of the line is usually due to stopping too early or parking too far from the line. You can drive a bit further forward before stopping, ensuring the car body is slightly closer to the parking space line. When parking, try to position the car a little to the right, which makes it easier to reverse into the parking space. Of course, maintaining proper distance both in front and behind is also important. More related information is as follows: 1. Parallel Parking: Parallel parking is a part of the second subject in the driving test. It has become increasingly common in urban areas, especially as parking spaces in regular parking lots become more limited. Many places have converted street sides into parking spaces, known as 'parallel parking spaces.' 2. Note: In the past, parallel parking involved four poles placed on the ground to symbolize the four corners of the garage. One criterion for successful parking was whether the vehicle entered the garage without touching these four poles. After the implementation of new traffic regulations, parallel parking no longer uses poles; instead, ground markings define the garage boundaries. For learners obtaining a C1 driver's license, the length of the parallel parking space is 1.5 times the vehicle length plus 1 meter. Drive the vehicle parallel to the garage in the forward direction, then reverse into the garage to the right rear without any pauses. As long as the vehicle is parked within the boundaries without crossing the side lines, it is considered a pass.
6
2
Share

Is it okay to park the car in a place with standing water?

There is no impact if car tires are submerged in water for a day or shorter periods. However, long-term immersion of tires in water or parking the vehicle in standing water that exceeds the wheel hub level can significantly affect the wheel hubs and brake components. Since both wheel hubs and brake parts are metal products, prolonged water exposure can lead to oxidation reactions, resulting in rust formation on the wheel hubs and brake components, which may impair the vehicle's braking performance. When replacing wheel hubs, the following parameters should be noted: 1. Center Bore (CB): Refers to the size of the wheel hub's center hole. Although wheel hubs with different center bore sizes from the original can be installed using adapters, it is not recommended for safety reasons. 2. Pitch Circle Diameter (PCD): A wheel hub with a PCD of 5x120mm means it has 5 lug bolts forming a circle with a diameter of 120mm. This value should also match the original specifications. 3. Offset (OFFSET): Also known as ET value. A positive offset indicates the mounting surface is outside the centerline, while a negative offset means it's inside. Passenger cars generally have positive offset values, and this parameter greatly influences the vehicle's driving stability and cornering traction.
20
5
Share

Choosing Between 21-inch and 20-inch Wheels for the New Cayenne

21-inch wheels consume more fuel compared to 20-inch wheels. The 20-inch tires offer better comfort but inferior handling performance than the 21-inch ones. The 21-inch tires require rim protection to ensure wheel safety. Larger wheel sizes result in higher tire aspect ratios, which visually enhance tension effects. Below are relevant details about the Cayenne: 1. Introduction 1: The Porsche Cayenne is an SUV model. The Porsche Cayenne Plug-in Hybrid, the Cayenne S E-Hybrid, comes with green brake calipers and is equipped with Michelin Latitude Sport low rolling resistance tires in size 275/50R19. 2. Introduction 2: The Porsche Cayenne first debuted at the Geneva Motor Show in early 2002, available in five variants: Cayenne, Cayenne S, Cayenne Turbo, Cayenne Turbo S, and Cayenne GTS. Originating from Porsche, a company renowned for producing supercars, the Cayenne, despite being an SUV, inevitably inherits many sports car characteristics. 3. Introduction 3: Consequently, it has become the world's fastest off-road vehicle, a 'pepper' speeding through the off-road world. In Spanish, 'cayenne' means 'pepper,' and this off-road vehicle from the famous sports car manufacturer indeed resembles a fiery pepper, both in appearance and essence, capturing people's attention.
12
0
Share

Is 20bar Water Pressure Enough for Car Washing?

20bar water pressure is sufficient for car washing. Here is the relevant information: 1. Optimal water pressure: The best water pressure for car washing is around 60 to 80 kilograms. Generally, water pressure within this range can effectively remove dirt and sludge from the car body without damaging the paint. Excessive washing pressure can cause the water stream to violently impact the car body, leading to damage. When washing parts like wipers and rearview mirrors, excessive pressure may also cause damage. 2. High water pressure: Compared to low water pressure, high water pressure can clean the car more thoroughly and significantly reduce washing time. However, it is still better to use appropriate water pressure for regular car washing.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.