What car is the CHR?

Should the Car's Air Conditioning Use Internal or External Circulation?

Whether to use internal or external circulation in a car's air conditioning system cannot be generalized and should be determined based on the specific situation. The choice between internal and external circulation should be adjusted according to actual conditions. Below is a detailed explanation of both modes: 1. Internal Circulation: Prolonged use of internal circulation can lead to a decline in air quality inside the car because no fresh air is being introduced. However, when the air conditioning is first turned on, internal circulation can cool the interior temperature more quickly. Using internal circulation during summer for cooling is more energy-efficient. However, prolonged use of internal circulation is not advisable, and it's recommended to occasionally open the windows to let in fresh air before closing them and continuing with internal circulation. 2. External Circulation: External circulation continuously brings in fresh air, but in situations like city traffic jams, it may draw in more exhaust fumes. It is advisable to use external circulation more often when heating the car in winter.

5

1

Share

What brand is Boto tire?

Boto is a tire brand under Wanda Boto. It is one of the first domestic enterprises to pass the "Three Identicals" certification (identical standards, production lines, and quality). The products have obtained 3C compulsory certification, ISO9001, and U.S. DOT certification, and have been repeatedly awarded the title of "China Quality Integrity Enterprise". Its products are not only sold domestically but also exported to 130 countries and regions including the United States, Europe, and Asia, which fully demonstrates the excellent quality of Boto tires. Below is relevant information: 1. Wanda Boto tire series: In addition to superior quality, Wanda Boto tires also offer high cost performance. Its passenger car tires include multiple series: premium sports series, mid-range comfort series, ultra-long wear-resistant series, SUV off-road series, winter tire series, and commercial vehicle series. 2. Introduction to tire WP15: This tire features outstanding wear resistance and noise reduction. The shoulder adopts a transverse groove design to enhance steering grip and handling stability. The tread features three longitudinal drainage grooves, providing excellent drainage performance and improving wet road handling. Additionally, it adopts a closed shoulder design, effectively reducing noise caused by air compression during driving and improving quietness. 3. Introduction to Wanda Boto Tire Company: Wanda Boto Tire is a wholly-owned subsidiary of China Wanda Group. Founded in 1988, Wanda Group has become one of China's leading enterprises specializing in the production of all-steel radial tires, engineering machinery radial tires, semi-steel radial tires, and light truck tires. It has established stable supplier relationships with numerous automakers including FAW Group, Shaanxi Automobile Holding Group, and Beiqi Foton Group.

14

3

Share

What does the ET value of a wheel hub mean?

The ET value of a wheel hub refers to the offset between the mounting surface of the wheel hub and the centerline of the wheel rim, commonly known as the offset (Off-set value). Below is a detailed introduction: 1. Types of ET values: (1) Zero-offset wheel hub—indicates that the mounting surface of the wheel hub is located at the centerline of the wheel hub. (Used for SUV models and some BMW vehicles) (2) Positive-offset wheel hub—indicates that the distance between the mounting surface and the centerline of the wheel rim is towards the outer side. (Used for front-wheel-drive and some rear-wheel-drive models) (3) Negative-offset wheel hub—indicates that the distance between the mounting surface and the centerline of the wheel rim is towards the inner side. 2. Larger ET values result in smaller wheel spacing: The larger the ET value, the more the wheel hub will be recessed towards the inner side (reducing the track width between two wheel hubs on the same axle); conversely, the smaller the ET value, the more the wheel hub will protrude towards the outer side (increasing the track width between two wheel hubs on the same axle). 3. The ET value determines whether the wheel hub will rub against vehicle components: If the ET value is too large, it may rub against the vehicle's suspension system, which not only affects the suspension system but also poses safety risks. Therefore, when selecting a wheel hub, it is essential to refer to the original wheel hub's ET value. Of course, adjustments can be made later by adding spacers to reduce the wheel hub's offset.

1

3

Share

Can you shift directly from D to S gear on the highway?

You can shift directly from D to S gear on the highway. Here is the relevant introduction to car gears: 1. P gear (Parking gear): P is used for parking. It uses a mechanical device to lock the rotating part of the car, preventing the car from moving. When the car needs to stay in a fixed position for a long time, or before leaving the vehicle after parking, the hand brake should be pulled and the lever should be pushed into the "P" position. 2. R gear (Reverse gear): R is used for reversing the vehicle. Usually, you need to press the safety button on the lever to move the lever to the "R" gear. It should be noted that when the vehicle has not completely stopped, you must not forcibly shift to the "R" gear, otherwise the transmission will be severely damaged. 3. N gear (Neutral gear): N is the neutral gear. When the lever is placed in the "N" gear, the power between the engine and the transmission has been cut off. If you need to stop briefly, you can place the lever in this gear and pull out the hand brake lever, and your right foot can move away from the brake pedal to rest. 4. D gear (Drive gear): D is the forward gear, used for driving on general roads. Due to different designs of car models in various countries, the "D" gear generally includes gears from 1 to high gear or 2 to high gear, and will automatically shift gears according to changes in speed and load.

12

1

Share

What Causes the Reversing Light Not to Work?

The reasons why the reversing light does not work are as follows: 1. The fuse is blown, causing the reversing light not to work. 2. The reversing light switch is damaged, causing the reversing light not to work. 3. The reversing light bulb is blown, causing the reversing light not to work. 4. The connecting wire is broken or the connector is loose, causing the reversing light not to work. The solutions for a non-working reversing light are as follows: 1. Check the reversing light switch: The reversing light will only illuminate when the switch is properly engaged. Unplug the reversing light switch connector and bridge the switch with a wire. If the light turns on, it means the switch is damaged. If it doesn't, the switch is fine. 2. Check the power supply to the reversing light: If the fuse is intact and the switch is functioning properly, but the light still doesn't work, measure whether there is power reaching the bulb. Without power in a normal circuit, the electrical device cannot function. 3. Check the ground wire: For an electrical device to work properly, the ground wire is essential. Many technicians overlook the ground wire during routine maintenance, but it plays a crucial role in automotive wiring.

12

1

Share

What is the correct way to use a differential lock?

The usage method of the differential lock is as follows: 1. Differential lock usage: The inter-axle and inter-wheel differentials of the drive axle are controlled by the differential lock switch on the dashboard in the cab; When the vehicle is stuck in muddy or slippery sections, press the differential lock switch at low speed or when stationary, release the accelerator pedal, and steer appropriately. The indicator light will illuminate, indicating that the differential has been correctly engaged. 2. Differential lock deactivation: When road conditions improve (the road becomes better), at low speed or constant speed operation, release the accelerator pedal, press the differential lock switch, and steer appropriately. The indicator light will turn off, indicating that the differential has been disengaged. The function of the differential lock: It locks the planetary gear mechanism of the differential, rendering the differential ineffective. This causes the drive shafts at both ends of the differential to become rigidly connected without any speed difference.

13

5

Share

What car is the CHR?

Should the Car's Air Conditioning Use Internal or External Circulation?

What brand is Boto tire?

What does the ET value of a wheel hub mean?

Can you shift directly from D to S gear on the highway?

What Causes the Reversing Light Not to Work?

What is the correct way to use a differential lock?

Is a Dual Clutch Transmission Manual or Automatic?

How Many Cylinders Does a Rotary Engine Equivalent to?

What is the difference between semi-synthetic and fully synthetic engine oil

What Causes the Anti-Skid Light to Stay On?