What car is the ART logo?

Why Are the Brake Calipers of Good Cars Positioned at the Rear?

Most luxury cars adopt rear-positioned brakes. With front-positioned brakes, the force from the caliper is upward while the force from the brake disc is downward during braking. These opposing forces can easily cause the car to experience phenomena like nose-diving or understeer during braking. When the brake disc is at the rear, the front of the car moves downward during braking, and the caliper also exerts a downward force. These two forces in the same direction help balance the front of the car. The main difference between front and rear brake discs lies in braking efficiency, with front brake discs generally offering higher braking efficiency. During driving, when the brakes are applied, the car tends to "nose-dive" forward due to inertia. At this point, the front braking system needs to handle over 70% of the braking force, while the rear brakes only need to manage about 30%. This means the car's braking force primarily relies on the front wheels, making disc brakes, which offer better braking efficiency and faster heat dissipation, more suitable for front braking. The notion that calipers at the rear signify a good car is not universally applicable.

16

3

Share

When Can Temporary License Plates Be Collected?

After applying for temporary license plates at the vehicle management office, the official license plates can be collected in about 15 days. After obtaining the official license plates, they still need to be securely sealed at the vehicle management office. Temporary license plates for vehicles are temporary driving permits issued by the public security vehicle management department when the vehicle has not yet been officially registered due to the processing of certain procedures. Below is more information about the use of temporary license plates for vehicles: 1. New vehicles using temporary license plates must not exceed 15 days, and the owner should promptly apply to the vehicle management authority for the use of official license plates. 2. Two temporary license plates should be affixed simultaneously, one in the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, and the other should be affixed in the lower left corner of the rear windshield inside the vehicle. 3. If the vehicle has installation limitations and only one temporary license plate is issued, it should be affixed in the lower left or right corner of the front windshield inside the vehicle, in a position that does not obstruct the driver's view, to ensure driving safety.

18

3

Share

What are the reasons for abnormal display of the engine oil pressure gauge?

There are several possible reasons for abnormal display of the engine oil pressure gauge: 1. If the gauge needle indicates low pressure, it may be due to excessive wear of the oil pump, clogged filter, or low oil level. 2. The pressure gauge itself may be faulty. 3. The lubricating oil may be too thin. 4. Poor sealing of the oil passages. When the gauge needle shows abnormal oil pressure, it indicates a fault in the engine components. If the oil gauge needle indicates low pressure or the needle fluctuates significantly, it may be caused by excessive wear of the oil pump, clogged filter, oil suction screen exposed above the oil level, low oil level, air mixed in the oil passages, or a faulty pressure gauge. Additionally, low viscosity of the lubricating oil, poor sealing and lubrication of the oil passages, excessive viscosity of the lubricating oil when too cold, or excessive sludge deposits in the lubricating oil can also cause abnormal display of the oil pressure gauge. The working principle of the oil pressure sensor (engine oil pressure sensor) is that it contains a sliding resistor. The oil pressure pushes the potentiometer of the sliding resistor to move, changing the current of the oil pressure gauge and altering the position of the needle.

1

3

Share

What is the function of the S gear in an automatic transmission car?

Here are the main functions of the S gear in an automatic transmission car: 1. The S gear is the sport mode, which allows for faster acceleration. 2. The S gear is the car's sport mode, where the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high RPM for a longer period. This allows the car to move at a lower gear and higher RPM for an extended time, resulting in greater torque output and acceleration. Here are some tips for using the S gear: 1. Generally, when overtaking, you can engage the S gear to enhance acceleration. Engaging the S gear can increase the engine load in a short time, but the S gear only delays upshifting without changing other operational aspects. This will inevitably increase the transmission load in a short time, accompanied by a rise in temperature, leading to increased wear. Therefore, try not to use the S gear for extended periods. 2. Since fuel injection increases at high RPM, the S mode consumes more fuel than the normal mode. Avoid engaging the S gear during vehicle startup, high-speed cruising, and coasting. 3. Cars that frequently drive in congested urban areas tend to accumulate more carbon deposits in the engine. Therefore, using the S gear appropriately at regular intervals helps remove carbon deposits from the engine, improve fuel economy, and extend the engine's lifespan.

18

1

Share

MG GT Tire Model

The tire model for MG GT is 205/55R16. The first number 205 indicates the tire width is 205MM, 55 represents the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width. The letter R stands for radial tire, and 16 denotes the rim diameter is 16 inches. The MG GT has a top speed of 200km/h, accelerates from 0-100km/h in 9.5 seconds, and has a fuel consumption of 5.7L per 100km. In addition to the model, tires also display the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim size compatible with the tire for practical use, such as standard rim 5.00F.

13

4

Share

Is an advance appointment required for the study and verification of deducted points on a driver's license?

No advance appointment is required for the study and verification of deducted points on a driver's license. You only need to report to the traffic management department of the public security authority within thirty days after the end of the scoring cycle to undergo verification and participate in the study session. Order No. 139 of the Ministry of Public Security of the People's Republic of China The "Decision of the Ministry of Public Security on Amending the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses'" has been adopted at the executive meeting of the Minister of Public Security and is hereby promulgated. It shall come into force as of April 1, 2016. Article 70: Drivers holding licenses for large buses, tractors, city buses, medium-sized buses, or large trucks shall report to the traffic management department of the public security authority within thirty days after the end of each scoring cycle to undergo verification. However, if there are no recorded points within a scoring cycle, the verification for that cycle is exempted. Article 71: If a driver holding a license for large buses, tractors, city buses, medium-sized buses, or large trucks has recorded points within a scoring cycle, they must participate in no less than three hours of study on road traffic safety laws and regulations, safe and civilized driving, emergency response, and other knowledge during verification, and receive warning education on traffic accident cases.

17

3

Share

What car is the ART logo?

Why Are the Brake Calipers of Good Cars Positioned at the Rear?

When Can Temporary License Plates Be Collected?

What are the reasons for abnormal display of the engine oil pressure gauge?

What is the function of the S gear in an automatic transmission car?

MG GT Tire Model

Is an advance appointment required for the study and verification of deducted points on a driver's license?

What is the difference between D gear and M gear?

Which city has manual proctoring for Subject 3 driving test?

How to Renew a Temporary License Plate?

What Causes the Slow Throttle Response in Lavida Plus?