What car is sert?

Can a car that uses 95-octane gasoline be filled with 92-octane gasoline?

A car that uses 95-octane gasoline can occasionally be filled with 92-octane gasoline. If you occasionally fill up with the wrong gasoline octane rating, simply switch back to the correct octane rating after use. However, long-term use of the wrong octane rating can have the following effects: For vehicles recommended for lower octane ratings, accidentally using higher octane gasoline will not cause damage. However, the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means both the engine's power output and thermal efficiency will decrease, resulting in a noticeable drop in performance. For vehicles recommended for higher octane ratings, using lower octane gasoline can cause engine knocking. Because the octane number is significantly lower, the gasoline's ignition point decreases, causing it to ignite prematurely during the compression stroke. If the fuel ignites before the spark plug fires during the compression stroke, resistance will occur during the upward stroke. This resistance makes the engine run very unevenly. If the knocking is imperceptible, it may only increase noise without obvious damage to the engine. However, if noticeable knocking occurs, it indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring. In addition to checking the recommended gasoline octane rating in the car's manual, it is also indicated on the fuel tank cap. Typically, the appropriate octane rating can also be determined based on the engine's compression ratio. Cars with a compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. If the compression ratio is higher, 98-octane gasoline is recommended. However, with the use of new technologies, the octane rating cannot be solely determined by the compression ratio. Engines with high compression ratios can also be tuned to use lower octane gasoline because factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline octane rating, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane.

12

4

Share

What Do the Numbers on Car Tires Mean?

The slash / is only used to separate the front and rear numbers, and the number behind it represents the aspect ratio. The following are measures for car tire maintenance: 1. Reasonable selection and matching of tires: Do not mix tires of different specifications and brands on the same vehicle or axle. At the very least, the same specification, brand, tread pattern, and even the same manufacturer's tires should be used on the same axle. 2. Inspection of tire surface wear: The tire surface wear condition should be frequently observed, and any issues should be addressed promptly. Generally, tires have wear indicators, and once the wear limit is reached, they must be replaced. Regularly check the tire tread and sidewalls for cracks, cuts, or other damages.

5

2

Share

Is the vehicle still under warranty if not serviced at a 4S shop?

Maintenance not performed at a 4S shop does not void the vehicle's warranty. Below are relevant details:1. Documentation: The key is to choose a qualified auto repair shop and retain maintenance records. During the warranty period, owners can freely choose maintenance locations, provided servicing is conducted at certified repair facilities with proper documentation retained. Should issues arise, these records serve as proof for warranty claims.2. Warranty Duration: New vehicles typically have a warranty of two years or 60,000 kilometers, whichever comes first. This means warranty coverage is subject to two conditions—a time limit of 2 years and a mileage limit of 60,000 km. Upon reaching either threshold, the vehicle's warranty period expires.

4

0

Share

Can the Engine Be Washed with Water?

The engine can be washed with water. Here are the relevant details: 1. Avoid washing with water when the engine is hot: Cleaning the engine while it is at a high temperature can cause sudden cooling, which may lead to deformation or even cracking of the engine block in severe cases. Additionally, washing at high temperatures can produce a large amount of steam, potentially affecting the electrical circuits. 2. Try to avoid the engine's external fuse box and the onboard computer: Some cars have warnings on the fuse box in the engine compartment, indicating that high-pressure water jets should be avoided in this area. Although these components are waterproofed and generally unaffected by rainwater, the high pressure from a water jet could pose a risk. Therefore, when cleaning the engine compartment, it is advisable to avoid the areas around the onboard computer and the external fuse box.

5

3

Share

What is the Skoda model named 'RAPID'?

"RAPID" is known as "Xin Rui" in Chinese, an A-segment entry-level sedan launched by SAIC Skoda. The Skoda Xin Rui was domestically produced in April 2013 and officially launched in the domestic market. Positioned as a compact family sedan, the Skoda Xin Rui is more than sufficient for daily commuting, featuring an interior design that leans towards simplicity and practicality, without excessive flamboyant elements. It adopts a family-style front-end design with smooth body lines running through the entire vehicle. Equipped with a 1.5L naturally aspirated engine, it offers relatively clear road feedback, responsive steering, and a generally easy driving experience.

16

0

Share

Is Engine Restoration Protection Necessary?

Engine restoration protection is necessary. Engine restoration protection fluid, also known as engine protector, is designed to protect the engine. It is a maintenance agent that effectively reduces wear and corrosion of engine components, inhibits the formation of deposits such as gum and sludge, and forms an extremely thin but highly pressure-resistant and wear-resistant protective layer on metal surfaces. This prevents engine oil from oxidizing, thickening, or acidifying, thereby protecting engine components and extending the engine's lifespan. The specific functions of engine restoration protection fluid are as follows: 1. Anti-wear: Reduces wear between internal metal components of the engine. 2. Lubrication: Forms a protective film on internal metal components of the engine, providing lubrication. 3. Noise reduction: Effectively reduces noise caused by friction or decreased lubrication performance of the engine oil. 4. Improves engine power and saves fuel: Enhanced lubrication performance reduces friction, thereby increasing engine power and, to some extent, reducing fuel consumption.

8

1

Share

What car is sert?

Can a car that uses 95-octane gasoline be filled with 92-octane gasoline?

What Do the Numbers on Car Tires Mean?

Is the vehicle still under warranty if not serviced at a 4S shop?

Can the Engine Be Washed with Water?

What is the Skoda model named 'RAPID'?

Is Engine Restoration Protection Necessary?

What is the difference between 1.4 and 2.0 displacement?

Comparison between BYD Tang and Equinox?

What details should you pay attention to when picking up a new car?

When to Drive a New Car at High Speed?