What car is represented by a greater-than sign and a less-than sign?

1 Answers
JadeFitz
07/29/25 4:06pm
A greater-than sign and a less-than sign represent the Renault car. Here are the specific details: 1. Exterior: The exterior adopts a hatchback style with a modestly sized front grille featuring a dot-matrix mesh in the center. The headlight assemblies on both sides extend downward. On the side, the new car also includes a charging port design. At the rear, the taillights extend to both sides of the emblem, seamlessly integrating with it. 2. Powertrain: The new car will be equipped with a plug-in hybrid system across the lineup, featuring a 9.8kW battery. In pure electric mode, it offers a maximum range of 48km. 3. Interior: The new car comes with a 9.3-inch central control screen, supporting Apple CarPlay and Android Auto. Additionally, it is equipped with front and rear parking sensors, hill-start assist, and the Renault Visio system.
Was this review help?
5
2
Share
More Forum Discussions

What is the tire brand of Chevrolet Cavalier?

The original tires equipped on the Chevrolet Cavalier are from the Maxxis brand. The tire sizes vary according to different configurations, including 185/65R15 and 195/55R16. Below are the situations when the Chevrolet Cavalier needs tire replacement: 1. If the tires show signs of aging, typically visible on the tread patterns and sidewalls, they need to be replaced. 2. The tire surface wear has reached the minimum limit indicator or even gone below this mark. 3. If the tire has bulges, indicating uneven force distribution, which can easily lead to a blowout. 4. If the tire sidewall is damaged, it usually requires immediate replacement.
18
2
Share

What Are Some Good Methods to Deal with Rusty Exhaust Pipes?

Methods to prevent exhaust pipes from rusting are as follows: 1. Apply anti-rust coatings. 2. Drill holes at the tail end of the exhaust pipe. 3. Replace with stainless steel exhaust pipes. 4. Pay attention to road conditions. Avoid driving on saline-alkali or muddy roads, and try to choose suitable routes. 5. Choose parking spots wisely. It's best not to park outdoors, especially at night, as dew can easily condense on the exhaust pipe. Without high temperatures to evaporate the moisture, corrosion is more likely. Therefore, parking in an underground garage is ideal. 6. Avoid short-distance driving. Short trips prevent water inside the exhaust pipe from being discharged in time, making the pipe highly susceptible to oxidation.
20
4
Share

What does L4 engine mean?

L4 refers to a conventional inline 4-cylinder engine. The vast majority of small-displacement vehicles are equipped with L4 engines, and such cars are the most common, such as Jetta, Santana, Besturn, etc. The inline four-cylinder engine is not a balanced structure. Although the imbalance is minimal in low-displacement and low-power configurations, vibrations increase as the engine size and power grow. Most inline four-cylinder engines with displacements below 2 liters rely on their built-in damping effects to reduce vibrations. Today, most engines with displacements above 2 liters use balance shafts. A four-cylinder engine requires two balance shafts to reduce its vibrations, operating at twice the frequency of the crankshaft. Despite this, there are still several large inline four-cylinder engines that do not use balance shafts. The smallest inline four-cylinder engine was the 1961 Mazda P360 Carol kei car, with a displacement of just 358cc. The Mazda OHV engine was quite ordinary except for its overhead valves. However, most inline four-cylinder engines have displacements above 1 liter. There are also mass-produced cars that reach the upper limit of 2.5 liters. Larger engines (up to 4.3 liters) can be found in racing and light truck engines, especially diesel-powered ones. The Porsche 3.0L (2990cc) inline four-cylinder engine in the Porsche 968 is a well-known example that uses balance shafts. The largest non-diesel inline four-cylinder engine was the 1953.2L (3188cc) engine fitted in the 1961 Pontiac Tempest.
17
4
Share

Where is JASSITOW Tire Produced?

JASSITOW Tire is a customized product of Qingdao JASSITOW Tire Company, belonging to a domestic second-tier tire brand, produced in Zhucheng, Shandong. The English name of JASSITOW Tire is JASSITOW. It boasts superior quality, reliable and stable performance, making it suitable for high-end vehicles, especially some premium off-road models. Below is additional information about JASSITOW Tire: JASSITOW Tires are relatively thick, with a toe area thickness of 1.75cm, a sidewall thickness of 0.76cm, and a tread thickness of 1.64cm. Typically, the sidewall thickness of tires is 0.5cm, and the tread thickness is 1.3cm. JASSITOW Tires use natural rubber, which is softer and more elastic, giving the tires both wear resistance and comfort. Additionally, the tread features double-layer steel wire protection for enhanced safety during driving. Generally, tires have a service life of 3-5 years, meaning they need to be replaced after about 3-5 years or 60,000-80,000 kilometers. However, the exact replacement cycle depends on driving conditions, temperature, tire pressure, and driving habits, as tire wear varies under different circumstances.
20
0
Share

How to Reset the Maintenance Light on the 10th Generation Civic?

To reset the maintenance light on the 10th generation Civic, follow these steps: 1. First, park the car and shift to P (Park) position. 2. Tap the central control screen to enter the settings. 3. In the settings, locate the maintenance information and select to reset the maintenance light. Below is some relevant information about car maintenance: 1. Primary vehicle maintenance items: Clean the car body and wipe the engine and chassis parts. Clean and maintain the air filter. Clean the gasoline filter. 2. Lubrication tasks for primary vehicle maintenance: Check the oil levels of the engine, transmission, rear axle, and steering gear, and add lubricating oil as required. 3. Inspection and tightening tasks for primary vehicle maintenance: Check the steering gear, tie rods, drag links, and the connection tightness of various steering arms.
2
2
Share

How to Adjust a Tire Pressure Monitor?

Tire pressure monitor adjustment method is as follows: Press the setting button 5 times to enter the interface for setting high pressure, low pressure, and high temperature values, and switch between selections; another button is for cycling through and adjusting the values. Below is an introduction to tire pressure monitoring: 1. Function: It automatically monitors and detects the "changes" in tire pressure while the car is in motion, and provides warnings through sound alerts or special marks on the dashboard when tire leaks, low pressure, or pressure increases due to rising environmental temperatures occur, prompting the owner to stop and check or perform maintenance promptly, ensuring the safety of both the vehicle and passengers on the road. 2. Classification: Indirect tire pressure monitoring (WSB), direct tire pressure monitoring (PSB), and composite tire pressure monitoring (TPMS).
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.