What car is represented by a cross and a snake?

What is the ideal wattage for car LED headlights?

Generally, LED headlights for cars range between 30-40W, while daytime running lights should not exceed 10W. However, the specific wattage depends on the original headlight power and personal brightness requirements. Theoretically, higher wattage LED headlights, meaning greater power, result in brighter illumination. But in practice, higher wattage isn't always better. Increased wattage leads to higher power consumption and operating temperatures, demanding better heat dissipation. Here are some additional details: 1. LED chip temperature: The operating temperature of LED chips must be kept below 85°C to ensure a lifespan exceeding 30,000 hours. Higher wattage LEDs generate more power and heat; exceeding 85°C will shorten the LED's lifespan as temperatures rise. Additionally, since car electrical systems have rated power limits, excessively high-wattage LED headlights can overload wiring, causing overheating and potential damage. In terms of luminous efficiency, LED headlights of the same wattage are brighter than original halogen bulbs. 2. LED light power: LED lights are categorized into different power ranges based on energy consumption, typically including 10W, 20W, 30W, 50W, and 100W for single automotive units. For reference, a 1W household LED bulb is equivalent to about an 8W incandescent bulb, while automotive LED lights are 2-3 times more powerful than standard halogen bulbs. Therefore, when replacing bulbs, it's unnecessary to choose higher wattage options; stick to LED lights with the same or lower power ratings as the original bulbs.

19

3

Share

What brand is the 8AT transmission in the Avalon?

The brand of the 8AT transmission in the Avalon is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Avalon utilizes an 8-speed automatic transmission with manual mode, as well as CVT (Continuously Variable Transmission) and E-CVT transmissions. The continuously variable transmission does not have specific fixed gears. While it operates similarly to an automatic transmission, the ratio changes differ from the gear-shifting process of a traditional automatic transmission. For daily use of the Lynk & Co 01's transmission, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid prolonged coasting in neutral. While some experienced drivers coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating and create a jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into reverse while still moving to showcase smooth operation, but this can severely damage the transmission gears and may lead to gear grinding over time. Avoid frequently climbing steep hills in Drive (D). Automatic transmission vehicles can overheat under heavy load or may upshift too early, resulting in insufficient power for hill climbing. In such cases, use manual mode to maintain lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck with the vehicle in Neutral (N) for transport. Never use a tow rope or tow the vehicle directly with another vehicle.

10

5

Share

What is the wading depth of the Changan CS35?

The maximum wading depth of the Changan CS35 is 450mm. The wading depth of the Changan CS35 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Changan CS35 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water intake. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the paths taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed recklessly. Instead, choose an alternative route.

7

2

Share

What is the curb weight of the Chang'an Benben in kg?

The curb weight of the Chang'an Benben is 1020kg. The Benben is an economical compact car designed and developed by Chang'an Automobile, a subsidiary of China Chang'an Automobile Group. China Chang'an Automobile Group Co., Ltd., formerly known as China South Industries Automobile Co., Ltd., was established in December 2005 and renamed on July 1, 2009. It is a large enterprise group established by China Ordnance Equipment Group Corporation to integrate and optimize its automotive industry. It is one of China's four major automobile groups, headquartered in Beijing. The weight of a car is typically around 1.5-2.6 tons. The weight of a car refers to its mass. The curb weight, or "empty weight," is the weight of the car when fully equipped according to factory specifications, with all fluids filled. The curb weight is an important design indicator for a car and a significant parameter affecting fuel consumption. A vehicle's fuel consumption is directly proportional to its curb weight—the heavier the car, the more fuel it consumes. The gross vehicle weight refers to the weight of the car when fully equipped and loaded with passengers (including the driver) and cargo as specified. Reasons for weight differences in car engines: Car engines are made from materials such as cast aluminum, cast steel, and cast iron. Depending on the vehicle classification, the engine's designed displacement, number of cylinders, and weight vary. Under the same material conditions, a 4-cylinder engine is lighter than a 6-cylinder, a 6-cylinder is lighter than an 8-cylinder, and an 8-cylinder is lighter than a 12-cylinder. Generally, minivan engines are lighter than those in compact cars, and compact car engines are lighter than those in mid-size cars. The engine of a minivan can be moved manually and usually weighs less than 100 pounds, while the engine of a large truck can weigh several hundred pounds or even over a ton.

5

3

Share

How Many Tons Can a 4x2 Axle Truck Carry?

According to the relevant regulations by the authorities, the standard load capacity for a 4x2 axle truck under the new rules is 38 tons. Generally, the overload limit for vehicles should not exceed 30%, meaning the maximum actual load for a 4x2 axle truck should not exceed 49 tons. Here are the relevant details: 1. Standard Load Capacity: The vehicle's registration certificate specifies a standard load capacity or passenger capacity. When driving on the road, the vehicle must not exceed the percentage specified on the registration certificate. 2. 4x2 Axle Truck Models: Most vehicles with this many wheels are dump trucks or large heavy-duty trailer trucks. For example, construction materials and goods are often transported using this type of 4x2 axle truck.

9

5

Share

What Are the Reasons for Insufficient Cooling in Car Air Conditioning?

Here are the specific reasons why car air conditioning may not be cooling sufficiently: 1. Insufficient or low refrigerant: This could be due to minor leaks. You can observe this through the sight glass on the dryer tank. When the air conditioning is operating normally, continuous bubbles in the sight glass indicate insufficient refrigerant. If there are obvious bubble flips, it indicates a severe shortage of refrigerant. In this case, simply adding refrigerant will resolve the issue. 2. Loose drive belt of the car air conditioning compressor: If the drive belt is loose, the compressor may slip during operation, leading to reduced transmission efficiency and a drop in compressor speed. This results in decreased delivery of compressed refrigerant, causing the car air conditioning to not cool properly. If the compressor drive belt is too loose, it should be tightened. If it cannot be turned by hand, it indicates the belt is too tight and should be loosened slightly. If tightening is ineffective or the drive belt shows signs of cracking, aging, or other damage, it should be replaced with a new one.

5

1

Share

What car is represented by a cross and a snake?

What is the ideal wattage for car LED headlights?

What brand is the 8AT transmission in the Avalon?

What is the wading depth of the Changan CS35?

What is the curb weight of the Chang'an Benben in kg?

How Many Tons Can a 4x2 Axle Truck Carry?

What Are the Reasons for Insufficient Cooling in Car Air Conditioning?

What sports car has a horse logo?

Engine Lubrication Methods?

What should be noted when temporarily parking?

What is the difference between 4S shop maintenance and external maintenance?