What car is Erdan?

1 Answers
DiJayden
07/30/25 1:22am
Erdan is the BAIC BJ212. Powertrain: The vehicle currently uses the 4A91T series 1.5T turbocharged engine, delivering a maximum horsepower of 136 HP and a peak torque of 200 N·m, which is significantly better than the previous 2.0L engine. It is paired with a 5-speed manual transmission, and the vehicle weighs over 1.6 tons. The official top speed is 115 km/h, similar to the previous 2.0L model. However, in practical driving, when the engine speed exceeds 2000 RPM and the turbo kicks in, the overall acceleration feel is noticeably improved. Chassis Design: The chassis is one of the most significant changes in the 2020 model. The 2020 BJ212 still features a body-on-frame structure, with part-time four-wheel drive (4WD) that includes low-range gearing but lacks a differential lock. The suspension setup has been updated to a front double-wishbone independent suspension and a rear four-link non-independent suspension.
Was this review help?
8
5
Share
More Forum Discussions

Can Vehicle Inspection Be Conducted in Another Location?

Yes. According to existing traffic laws and regulations, cross-regional vehicle inspection is possible through a delegated inspection process. However, the final inspection procedures must still be issued by the vehicle's registration location. This means you don’t have to drive the vehicle back to its registered location; instead, you can opt for cross-regional inspection via a delegated inspection model. The only requirement is that you may need to handle some additional procedures yourself. Below are some extended details: Inspection Documents: The most important document for cross-regional vehicle inspection is the "Cross-Regional Vehicle Inspection Authorization Letter." When applying for cross-regional inspection, the first step is to obtain this authorization letter. Then, with the authorization letter and other relevant inspection documents, you can proceed with the inspection at the local vehicle management office in the delegated location. To apply for the Cross-Regional Vehicle Inspection Authorization Letter, you will need the vehicle owner’s ID card, vehicle license, insurance documents, original and photocopy of the vehicle and vessel tax receipt, and the cross-regional inspection application form. These should be submitted to the vehicle management office in the registration location. Required Documents for Inspection: When conducting the inspection, you must bring the vehicle license, insurance documents, and the Cross-Regional Vehicle Inspection Authorization Letter to the delegated local vehicle management office. Note: The vehicle must not have any unresolved traffic violations; otherwise, the inspection cannot proceed normally.
16
4
Share

How Many Car Brands Are There?

Analysis of how many car brands there are is as follows: Domestic brands mainly include: FAW Hongqi, Dongfeng, Brilliance Zhonghua, Geely, Chery, BYD, Great Wall, Hafei, Changhe, Foton, etc. Joint venture brands include: FAW-Volkswagen, FAW Fengyue, Shanghai Volkswagen, Shanghai General Motors, Changan Ford, Changan Suzuki, Guangzhou Honda, Guangzhou Toyota, Dongfeng Citroën, Dongfeng Peugeot, Changfeng Mitsubishi, Hainan Mazda, Sichuan Toyota, Jiangling Ford, etc. The rankings of world-famous car brands mainly include: SPYKER - Netherlands; Maybach - Germany; Bentley - UK; Rolls-Royce - UK; Lincoln - USA; Bugatti - France;
18
0
Share

Is the Probability of Car Spontaneous Combustion High?

Car spontaneous combustion is a very low probability event, so there is no need to worry too much. However, for older vehicles, extra caution is advised. Common causes of spontaneous combustion include: oil leaks—due to aging and bursting of oil pipes over time; electrical issues—many car owners like to modify their audio systems or add electronic devices, which can lead to poor contact and other problems; water-damaged cars—vehicles that have been submerged in water may experience oxidized circuits, uneven power supply, and overheating, leading to spontaneous combustion; overheating brakes—on roads with long slopes, prolonged braking can cause brake pads to overheat and catch fire. By paying attention to regular inspections and timely maintenance, these issues can be avoided.
11
3
Share

Will un-inspected vehicles be automatically photographed on the road?

They will not be caught by surveillance cameras. Here is the relevant information: Unqualified vehicles: If a vehicle misses its annual inspection, it is considered unqualified, and driving it on the road constitutes illegal driving. According to the Road Traffic Law, vehicle owners must have their vehicles inspected on time. Driving an uninspected vehicle on the road will result in penalties such as vehicle impoundment, a fine of 200 yuan, and 3 demerit points. Relevant regulations: Additionally, according to the 'Mandatory Scrapping Standards for Motor Vehicles,' registered motor vehicles that fail to obtain an inspection compliance mark within three consecutive inspection cycles after the expiration of the inspection period must be mandatorily scrapped. In other words, if a motor vehicle fails to undergo inspection three times consecutively, it will be forcibly scrapped. Driving such a vehicle on the road will also result in fines, revocation of the driver's license, a two-year ban from reapplying for a driver's license, and the vehicle being confiscated and forcibly scrapped.
20
3
Share

Can the clutch not be used if it rusts?

Clutch can be used if it rusts, but it is not recommended. Here is the extended information: Automobile clutch: The automobile clutch is located in the flywheel housing between the engine and the transmission. The clutch assembly is fixed to the rear plane of the flywheel with screws, and the output shaft of the clutch is the input shaft of the transmission. Precautions: During driving, the driver can step on or release the clutch pedal as needed to temporarily separate or gradually engage the engine and the transmission, thereby cutting off or transmitting the power input from the engine to the transmission. It is a mechanical part that can engage or disengage the driving shaft and the driven shaft as needed. It can be used to control the start, stop, speed change, and direction change of the machine transmission system.
5
3
Share

Can You Brake While Driving Straight?

You cannot brake while driving in a straight line. Below is additional information: Consequences: Naturally, you cannot stop during straight-line driving. Once the system indicates the start of straight-line driving, stopping will result in a failure. Therefore, before straight-line driving, ensure there are no obstacles ahead and maintain a distance of at least 100 meters from the vehicle in front. When the system signals the end of straight-line driving, you can then stop to perform other actions. Test Content: Vehicle preparation, simulated lighting test, starting, straight-line driving, gear shifting operations, lane changing, pulling over, driving straight through intersections, left turns at intersections, right turns at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, U-turns, and nighttime driving. Safe and Civilized Driving Knowledge: Requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.