What car has two rings?

Which Cars Use 98 Octane Gasoline?

Cars that meet the following conditions are more suitable for 98 octane gasoline: 1. Vehicles with an engine compression ratio of 10 or above. 2. European luxury cars with precise engines and complex electronic systems, as well as high-performance sports cars. 3. Vehicles with a fuel tank cap labeled "Please use 95 octane or higher gasoline." Below is relevant information: 1. Gasoline Octane Rating: The octane rating represents the gasoline's octane number. For example, 95 octane gasoline consists of approximately 95% isooctane and 5% n-heptane. Since isooctane has better anti-knock properties and n-heptane has poorer anti-knock properties, a higher octane rating indicates better anti-knock performance. By extension, 98 octane gasoline means even better anti-knock performance. 2. Notes: 98 octane gasoline is a high-quality fuel under China's National V standard. When refueling for the first time, owners do not need to drain the fuel tank or clean it specifically. The remaining 92 or 95 octane gasoline in the tank can be directly mixed with 98 octane gasoline. It is recommended to consume as much of the existing gasoline as possible before the first refill of 98 octane gasoline, avoiding too much residual fuel. After three refills of 98 octane gasoline, the vehicle will complete a "natural upgrade."

8

5

Share

What is an ETC in-vehicle device?

ETC stands for Electronic-Toll-Collection, which means electronic toll collection system. To apply, you need to provide the original and photocopies of the vehicle owner's valid ID card and driving license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the driving license should include the page with the most recent annual inspection stamp. A bank card for deducting highway tolls; aged between 18 and 60; a vehicle registered under a personal name; the current year's vehicle insurance policy; for corporate applications, the handler's ID (or driver's license), the company's organization code certificate (or business license), and the company seal are required. Generally, an ETC device can last 2-3 months on a single charge. The ETC user manual does not specify how long a single charge lasts. For vehicle owners who do not frequently use ETC, it is recommended to charge the ETC device every 3 months. For wired ETC devices, if they are not used for a long time, it is advised to charge them once a month to prevent battery self-discharge from affecting the ETC battery's lifespan. Documents required for a company vehicle: An introduction letter from the vehicle owner (with the company seal); photocopies of the organization code certificate or business license (with the company seal); the agent's original ID card; the original vehicle driving license; the vehicle for which ETC is to be applied. How ETC works: Through the on-board electronic tag installed on the vehicle's windshield, it communicates with the microwave antenna in the ETC lane at the toll station. Using computer networking technology, it settles accounts with the bank in the background, allowing vehicles to pay highway or bridge tolls without stopping at toll stations. Starting from January 1, 2018, electronic invoices can be issued for tolls paid using ETC cards or user cards, as well as for ETC card top-ups, replacing paper receipts. Benefits of installing ETC: Time-saving: Avoid the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions; Cost-saving: Reduce vehicle start-up and braking frequency, minimizing wear and fuel consumption, with users enjoying toll discounts; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous.

14

2

Share

What does the red exclamation mark light indicate?

The red exclamation mark (specifically a circle with an exclamation mark inside brackets) represents a warning for the braking system, primarily indicating either a brake system malfunction or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark indicating brake system issues, other exclamation marks on a car are yellow, representing general faults, automatic transmission issues, abnormal tire pressure, or lighting system faults. Below is a detailed analysis of these four scenarios: General Fault: A triangle with an exclamation mark inside indicates a general performance or component malfunction. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external lighting faults, or engine oil pressure sensor failure. A visit to a 4S shop is necessary to diagnose and address the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside is the automatic transmission warning light, indicating a transmission fault or low transmission fluid. Timely replacement of transmission fluid is required. Abnormal Tire Pressure: A horizontal line under brackets with an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when tire pressure is too low. Check and adjust the tire pressure to the normal range. Lighting System Fault: A yellow bulb with an exclamation mark indicates a lighting system fault. Solution: Visit a 4S shop for inspection as soon as possible, or perform a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.

11

0

Share

What are the causes of unstable idle speed in gasoline engines?

Excessive carbon deposits in the throttle valve and surrounding intake passages can change the cross-sectional area of the air passage, making it difficult for the control unit to precisely regulate the idle air intake. This may also lead to an overly rich or lean air-fuel mixture, causing unstable idle speed in the car. The engine's intake system has numerous components, such as the throttle motor, idle speed stepper motor, duty cycle solenoid valve, air flow meter, and intake pressure sensor. Faults or damage to these components can result in unstable idle speed. The specific causes of unstable idle speed in gasoline engines are as follows: 1. Excessive carbon deposits in the throttle valve and air flow meter: The throttle valve and air flow meter are prone to dirt accumulation. Most modern cars use electronic throttle valves, which can be affected by even minor carbon deposits. Excessive carbon deposits in the throttle valve can cause throttle response issues, severe power loss, and unstable idle speed. 2. Dirty air flow meter: This can lead to incorrect air flow signals. Since the intake air volume determines the fuel injection volume, this directly results in inaccurate fuel injection, increasing fuel consumption and causing severe power deficiency. Therefore, replacing the air filter is crucial, and it is recommended to clean it every 30,000 kilometers. 3. Excessive carbon deposits in the cylinder combustion chamber and pistons: Too much carbon buildup in the combustion chamber can absorb some of the gasoline, prolonging the ignition start time. 4. Excessive carbon deposits: These often form on the valves and piston rings, indirectly causing insufficient cylinder pressure. Cold starts are more likely to result in unstable idle speed, which improves when the engine warms up. There can be many reasons for unstable idle speed in daily driving, such as vacuum leaks or faulty spark plugs.

16

4

Share

Will points be deducted for not using turn signals?

Failure to use turn signals or incorrect use of turn signals will result in a deduction of 10 points each time. The specific regulations are as follows: Not using or incorrectly using turn signals before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. Turning within less than 3 seconds after activating the turn signal before starting, turning, changing lanes, overtaking, or parking will result in a deduction of 10 points. There are 6 instances in Subject 2 where turn signals are required: 1. Turn on the left turn signal when starting the vehicle. 2. Turn on the left turn signal when starting on a slope. 3. Turn on the right turn signal when pulling over for parallel parking, stopping the vehicle 30 cm from the curb before reversing. 4. Turn on the left turn signal before shifting into reverse gear for parallel parking, as the steering wheel will be turned fully to the right during reversing, causing the front of the car to move left. 5. Shift into drive gear and turn on the left turn signal before exiting the parking space in parallel parking, turning it off promptly after exiting. 6. Turn on the left turn signal when entering the area for a right-angle turn, turning it off promptly after completing the turn. Subject 2 has a maximum score of 100 points, with evaluation criteria for failing, deducting 20 points, deducting 10 points, or deducting 5 points. The test is passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required. ② For other vehicle types, a score of 80 or above is required. The C1 and C2 license tests include five mandatory items: reversing into a parking space, parallel parking, slope parking and starting (canceled for C2), right-angle turns, and curve driving (commonly known as S-curves). Some regions also include a sixth item: high-speed toll card collection. The A1, A2, A3, B1, and B2 license tests include: pole test, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turns, narrow gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulated highway driving, continuous sharp mountain curves, tunnels, rain (fog) conditions, slippery roads, and emergency handling.

11

0

Share

How to Determine if the Fuel Rail is Faulty?

When the air pressure is insufficient, it may cause poor acceleration or engine hesitation. When the air pressure is unstable, the engine will respond sluggishly with jerky movements. Excessive air pressure can lead to engine vibration, incomplete combustion resulting in reduced fuel economy, and environmental pollution.

17

3

Share

What car has two rings?

Which Cars Use 98 Octane Gasoline?

What is an ETC in-vehicle device?

What does the red exclamation mark light indicate?

What are the causes of unstable idle speed in gasoline engines?

Will points be deducted for not using turn signals?

How to Determine if the Fuel Rail is Faulty?

Where to Inflate Car Tires?

Will Insurance Cover Cars Flooded in Heavy Rain?

Where is the most suitable location to place car decorations?

What is the reason for the Buick GL8 hazard lights flashing continuously?