What car has two air vents on the hood?

What type of engine oil is suitable for the Sail?

The original factory-recommended engine oil for the Sail is SM-grade 5W-30 mineral oil. Using this type of oil is sufficient. Below are the relevant details: 1. Function: Engine oil lubricates the engine, ensuring smoother operation, reducing wear, and extending the engine's lifespan. Beyond lubrication, engine oil also serves to clean, cool, prevent rust, seal, resist oxidation, and cushion impacts. Since the engine's longevity is closely tied to the quality of the oil, choosing the right oil is crucial. 2. Precautions: When using engine oil, ensure the oil level is maintained within the appropriate range to guarantee proper engine lubrication. Regularly check the engine oil level, such as when refueling. If the engine oil pressure warning light on the dashboard illuminates, immediately check the oil level. When adding oil, be careful not to exceed the upper limit mark on the dipstick, as overfilling can affect engine performance and potentially damage the vehicle.

8

2

Share

Where is the Tesla OBD port located?

Tesla's OBD port is located behind the small storage compartment beneath the large infotainment screen. OBD stands for On-Board Diagnostics, which translates to "on-board automatic diagnostic system" in Chinese. This system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it immediately issues a warning. Below is a detailed introduction to the OBD system: 1. Brief Introduction: OBD, short for On-Board Diagnostics, is a diagnostic system extended for automotive fault detection. 2. Working Principle: The OBD system continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards. If they do, it immediately issues a warning. When a system fault occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. Simultaneously, the Powertrain Control Module (PCM) stores the fault information in memory. Through a specific procedure, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. 3. Scope of Coverage: OBD monitors in real-time systems and components such as the engine, catalytic converter, particulate filter, oxygen sensors, emission control system, fuel system, EGR, etc. It then connects to the ECU through information related to various emission-related components.

9

5

Share

What is the impact of seat height on reference points?

After adjusting the seat, the reference points will change. This has the greatest impact on Subject 2 of the driving test, including the hill start, right-angle turn, S-curve driving, reverse parking, and parallel parking—all of these items require reference points. Below are specific techniques for Subject 2 of the driving test: 1. Slow speed: Maintaining a slow speed is the fundamental rule for practicing Subject 2. Ensure the vehicle doesn't stall while keeping the speed as slow as possible. A slower speed allows sufficient time for adjustments at each step. 2. Adjust the rearview mirrors: After getting into the car, always adjust the rearview mirrors properly, which is especially important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, the reference point on the car, and the reference point on the ground. During Subject 2 operations, it's essential to accurately locate and observe these points to ensure precision. 4. Pay attention to the four corners of the car: The front corner of the car tends to scrape the outer line during reverse parking, while the rear corner often scrapes the side lines of the parking space. The front corner may go out of bounds during S-curve driving and right-angle turns. In parallel parking, the front corner may scrape the outer line or the left front corner of the parking space, and the right rear corner may scrape the right parking space line. Therefore, always monitor the four corners relative to the outer lines.

6

3

Share

Does Tesla Model have a fuel version?

Tesla is a pure electric vehicle brand and does not have gasoline-powered cars. Here are specific details about Tesla: 1. Historical Background: Tesla is an American electric vehicle and energy company that produces and sells electric cars, solar panels, and energy storage devices. Headquartered in Palo Alto, it was founded on July 1, 2003, by Martin Eberhard and Marc Tarpenning. The founders named the company "Tesla Motors" in honor of physicist Nikola Tesla. 2. Main Models: Tesla models include the Roadster, Model S, Model X, Model 3, and Model Y.

9

2

Share

Where is the ISOFIX interface for the 2015 Vezel?

The ISOFIX interface of the Vezel is located in the rear seat. Here is some relevant information about the ISOFIX interface: 1. Description of the ISOFIX interface: There are two interfaces at the connection between the car seat backrest and the cushion, which are the ISOFIX interfaces. It is a rigid connection method designed to prevent seat flipping during a collision. Some seats also come with support legs and other anti-flip devices in addition to the ISOFIX interface. 2. Function: The ISOFIX interface can securely connect the child car safety seat to the car, providing a simpler and safer way to install the car seat.

17

2

Share

What does the white exclamation mark mean?

Dry dual-clutch transmission clutch overheating. Below is relevant information about the clutch: 1. Clutch: The clutch is located in the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission. During driving, the driver can press or release the clutch pedal as needed to temporarily separate or gradually engage the engine and transmission, thereby cutting off or transmitting the power from the engine to the transmission. 2. Principle of releasing the clutch: The principle of releasing the clutch is: "slow at first, then fast, and coordinated in three steps." When initially pressing down, do it quickly and fully depress it in one motion. When lifting up, do it quickly during the free travel phase, slow down as it approaches contact, pause slightly at the semi-engagement point, and then release. The key to this process is accurately identifying the semi-engagement point. To control the vehicle speed effectively, use the semi-engagement point as the dividing line—lift quickly above it and lower slowly below it, adjusting downward to select a speed that suits you.

14

5

Share

What car has two air vents on the hood?

What type of engine oil is suitable for the Sail?

Where is the Tesla OBD port located?

What is the impact of seat height on reference points?

Does Tesla Model have a fuel version?

Where is the ISOFIX interface for the 2015 Vezel?

What does the white exclamation mark mean?

What is the actual fuel consumption of the 2014 Verna?

Is the Civic's speedometer 240 or 260?

What is the battery model number for the Skoda Fabia?

What is the reason for the Skoda dashboard not displaying the total mileage?