What car has three shields as its logo?

Can the 2020 Geely Emgrand remotely control window roll-up/down?

Geely Emgrand 2020 cannot remotely control window roll-up/down, but an automatic window closer can be installed. There are three modes for the automatic window closer: 1. Windows automatically start closing immediately after turning off the engine and removing the key. 2. Windows automatically start closing after turning off the engine, removing the key, and closing the driver's door. 3. Windows automatically start closing after turning off the engine, closing the door, and pressing the remote control. The standard sequence for window closing is: Driver's window, front passenger window, rear passenger window behind the front passenger, and rear passenger window behind the driver, in that order. Of course, individuals can freely choose and adjust the control lines of the automatic window closer for each window to change the closing sequence. Car owners can select the appropriate automatic window closing mode and sequence based on their own needs.

3

4

Share

Where is the production date of the Skoda Octavia?

The production date is indicated on the vehicle's nameplate, which is usually located on the right B-pillar. Exterior Design: The vehicle adopts Skoda's new family design language, showcasing a simple, stylish, and elegant styling with exquisite detailing that adds the perfect finishing touch. The most eye-catching feature is the integrated panoramic sunroof with black elements extending from the front to the middle of the roof. The extended full-open design creates excellent visual extension and enhances cabin transparency. Additionally, the newly added light-guide LED daytime running lights add a sense of luxury and high-tech sophistication to the vehicle. Powertrain: The new Octavia is equipped with Volkswagen Group's latest EA211 engine, offering two power options: 1.4TSI and 1.6L. It is paired with Volkswagen Group's globally renowned 7-speed DSG dual-clutch transmission, Tiptronic 6-speed automatic manual transmission, and the classic 5-speed manual transmission, delivering both powerful performance and refined gear-shifting.

18

2

Share

What is the fuel pressure for an Audi A6?

The normal fuel pressure for a car ranges between 300 kPa and 350 kPa. It's important to note that fuel pressure can vary depending on the vehicle model. Generally, any pressure around 300 kPa is considered normal, which is equivalent to 0.3 MPa. Below is more information about automotive fuel pressure: 1. When the engine oil pressure is too high, it can disrupt normal lubrication conditions; 2. When the engine oil pressure is too low, it may lead to inadequate lubrication, cooling, and cleaning, resulting in adhesive wear of components.

4

0

Share

Is the 12123 electronic driver's license useful?

The 12123 electronic driver's license is useful, but only in certain regions. The electronic driver's license is a convenience measure introduced by local authorities and is only applicable within their administrative jurisdiction, not nationwide. In areas where electronic documents are not yet implemented, a physical driver's license is still required. In regions where electronic driver's licenses are available, drivers can present the electronic information QR code of their driver's license and vehicle registration to undergo roadside checks, information verification, and handle certain on-site simplified traffic violation procedures. Important notes when presenting an electronic driver's license: 1. The electronic driver's license is not applicable for handling traffic violations such as temporary suspension, detention, or revocation of the driver's license; 2. The electronic driver's license cannot be used on highways. When driving on highways or across provinces, drivers must carry their physical paper driver's license; 3. Screenshots of the electronic driver's license on a phone do not have the same legal effect as a physical driver's license. Only real-time updated electronic documents are valid; 4. The electronic driver's license must match the holder's identity. If the vehicle is not registered under the driver's name, a physical vehicle registration document must also be presented.

14

0

Share

What is the model of the Venucia T60 CVT transmission?

Venucia T60 CVT transmission model is XTRONIC-CVT transmission. Transmission Introduction: CVT (Continuously-Variable-Transmission), directly translated as continuously variable transmission, commonly known as the stepless transmission, as the name implies, does not have specific gears. It operates similarly to an automatic transmission, but the change in speed ratio is different from the gear-shifting process of an automatic transmission, hence the power transmission is continuous and smooth. Working Principle: In the CVT transmission system, traditional gears are replaced by a pair of pulleys and a steel belt. Each pulley is actually a V-shaped structure composed of two conical discs. The engine shaft is connected to the small pulley, which drives the large pulley through the steel belt. The secret lies in the special pulley: the structure of the CVT transmission pulley is quite peculiar, divided into movable left and right halves that can move closer or apart. The conical discs can tighten or loosen under hydraulic pressure, squeezing the steel belt to adjust the width of the V-shaped groove. When the conical discs move inward to tighten, the steel belt is pushed outward (centrifugally) by the discs; conversely, it moves inward. In this way, the diameter of the disc driven by the steel belt changes, altering the transmission ratio.

3

5

Share

What are the precautions for overhauling the Volkswagen EA111 engine?

Pay attention to whether the engine is cooled, the disassembly and installation sequence of small parts, etc. Engine cooling: Disassemble after the engine is cooled, firstly for easier disassembly, and secondly to prevent deformation during disassembly, as high temperatures weaken rigidity and make deformation more likely. Bolts should be removed in sequence: The purpose of sequential removal is to prevent breakage or deformation during disassembly. Use specialized tools for inspection: After engine disassembly, each component needs to be inspected. More "experienced mechanics" rely on empirical methods like "looking" or "feeling." For beginners or those with insufficient experience, professional tools are required for inspection (this is also the most accurate and recommended method). Follow the repair manual's methods, using tools such as vernier calipers, outside micrometers, dial indicators, etc. Sufficient lubrication must be maintained when installing bearing shells: When installing crankshaft bearing shells or connecting rod bearing shells, sufficient lubrication (usually using engine oil) is necessary. Otherwise, during engine rotation, the lack of an oil film can cause shaft damage. Do not apply too much sealant: Applying too much sealant can lead to it being squeezed into the oil pan, causing oil passage blockages.

6

1

Share

What car has three shields as its logo?

Can the 2020 Geely Emgrand remotely control window roll-up/down?

Where is the production date of the Skoda Octavia?

What is the fuel pressure for an Audi A6?

Is the 12123 electronic driver's license useful?

What is the model of the Venucia T60 CVT transmission?

What are the precautions for overhauling the Volkswagen EA111 engine?

Where is the temperature sensor located in the Audi A8?

What is the fuel consumption of the Outlander 2.0?

What does a circle displayed on the Volkswagen Sagitar steering wheel indicate?

Do 4S shops use dry ice to clean engine carbon deposits?