What car has three arrow-like logos?

1 Answers
BradyFitz
07/29/25 4:06pm
The car with three arrow-like logos is Maserati. More information about Maserati is as follows: 1. Maserati is an Italian luxury car manufacturer founded on December 1, 1914 in Bologna, with its current headquarters in Modena. The brand's logo features a trident. In 1993, Fiat S.p.A. acquired Maserati, allowing the brand to be preserved. 2. Maserati offers three engine options: a 3.0L V6 twin-turbocharged, a 3.8L V8 twin-turbocharged gasoline engine, and a 3.0L V6 turbocharged diesel engine. It comes with an 8-speed automatic transmission and is equipped with a four-wheel drive system.
Was this review help?
10
4
Share
More Forum Discussions

What to Do If You Experience a Tire Blowout on the Highway?

Handling methods for a tire blowout on the highway: 1. Maintain control of the steering wheel and gradually reduce speed; 2. Slowly move the vehicle to the right and stop; 3. Quickly place a triangular warning stand 100 meters behind the vehicle; 4. Replace the spare tire and promptly exit the highway. Continuing to drive with a blown tire can damage the vehicle's suspension and transmission systems, as well as deform the wheel hub. Due to the loss of tire support, the stability of the vehicle body is severely compromised, increasing the risk of traffic accidents. Methods for tire maintenance include: 1. Regularly remove debris from tire treads; 2. Periodically check tire pressure; 3. Inspect tire wear and replace them promptly; 4. Repair punctures in a timely manner; 5. Immediately stop and check the tire condition if abnormalities are detected while driving.
18
0
Share

Will the car slow down if the accelerator is not pressed?

Will the car slow down if the accelerator is not pressed? Because the power of the vehicle comes from the engine, the power and torque of the engine, in addition to the inherent parameters of the engine itself, mainly depend on the engine speed. When the driver operates the accelerator pedal, it ultimately results in a change in engine speed. If the accelerator is released, the engine theoretically supplies fuel at the idle speed level, causing the engine speed to drop to idle speed, and the power and torque output by the car will become very small. Due to factors such as ground resistance, the vehicle's speed will gradually decrease. When using the accelerator in daily driving, it is essential to press the accelerator slowly and release it quickly. After releasing the accelerator, the foot must be placed on the brake pedal to be ready to stop at any time. Do not keep the foot on the accelerator, as it can easily lead to mistaking the accelerator for the brake in an emergency, causing a serious accident.
10
5
Share

What to Do If a Car Is Left Unused for a Year?

If a car is left unused for a year, the following steps should be taken: 1. Ensure the car body is clean and dry before parking. Carefully inspect areas prone to water accumulation at the bottom of the car, and remove any standing water promptly. After parking, cover the car with a car cover to protect it from direct sunlight and erosion by rain and snow. 2. Perform maintenance, including changing the oil and three filters, before parking. Disconnect the positive and negative terminals of the battery. It is recommended to start the car and charge the battery every three months to prevent battery drain. 3. If parking outdoors, choose a relatively higher spot, as lower areas are more humid and can lead to faster rusting of the car body. 4. Park the car on a flat surface to keep the suspension system in its normal position and ensure even stress distribution across all suspension components. 5. If the car is parked for more than a year, change the oil before using it again.
8
3
Share

Is Maxxis a part of CST Tires?

Maxxis is a premium tire brand under CST Tires, originating from Taiwan. It is one of the brands used by Cheng Shin Rubber in the automotive tire sector. Maxxis is produced by Cheng Shin Rubber (China) Co., Ltd., a foreign-invested enterprise jointly operated by Taiwan's Cheng Shin Rubber Industry Co., Ltd. and Japan's Toyo Tire & Rubber Co., Ltd. Additional information: Maxxis products are marketed in over 170 countries and regions worldwide. The renowned brand valuation agency BrandFinance released the "2017 Top 10 Most Valuable Tire Brands Globally" ranking, where Maxxis secured a spot in the global top ten. Maxxis has invested billions in establishing R&D centers and professional tire testing grounds, incorporating advanced global R&D technologies and testing equipment. It also collaborates with automakers such as Shanghai GM, Shanghai Volkswagen, SAIC Motor, Changan Ford, and Dongfeng Nissan to provide original equipment tires.
15
4
Share

Is the BMW 5 Series an All-Aluminum Body?

The BMW 5 Series is not an all-aluminum body. The BMW 5 Series uses a standard steel-aluminum hybrid body. The front engine hood, four doors, trunk lid, roof, and fenders of this car are all made of aluminum alloy. The extensions of the A-pillars and B-pillars are made of high-strength steel, while the front and rear bumpers and the side skirts of the body exterior are plastic components. Taking the 2021 BMW 525Li as an example, it is a mid-to-large-sized 4-door 5-seater sedan with a body size of 5106mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3105mm. This car is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 135 kW and a maximum torque of 290 Nm.
11
0
Share

How to Charge a Car Battery Without Removing It?

To charge a car battery without removing it, you can use another vehicle to jump-start the dead battery. The method is as follows: 1. Prepare two jumper cables. The rescue vehicle and the vehicle being rescued should be parked head-to-head, with the rescue vehicle's engine running; 2. Locate the batteries of both vehicles and identify the positive and negative terminals, ensuring not to mix them up; 3. Connect one end of the red positive jumper cable to the positive terminal of the rescue vehicle's battery, then connect the other end to the positive terminal of the dead battery; 4. Connect one end of the black negative jumper cable to the negative terminal of the rescue vehicle's battery, then connect the other end to the negative terminal of the dead battery; 5. When connecting the cables, attach one cable at a time rather than connecting one vehicle completely before the other. Be careful not to let the positive and negative terminals touch each other, as this could cause a short circuit; 6. Once the jumper cables are properly connected, start the rescued vehicle normally.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.