What car has the V logo?

What is the function of a car stabilizer bar?

The function of a car stabilizer bar is: when the horizontal heights of the left and right wheels are different, to prevent torsion of the bar body, the stabilizer bar generates anti-roll resistance to inhibit body roll. That is, when the suspensions on both sides move up and down synchronously, the stabilizer bar does not function. It only comes into play when the suspensions on both sides move asynchronously due to road undulations or cornering. According to their purposes and functional requirements, car stabilizer bars are divided into the following types: 1. Front lower control arm; 2. Toe adjustment stabilizer link (essential original equipment); 3. Front shock absorber tower top stabilizer bar; 4. Chassis reinforcement stabilizer bar.

4

1

Share

Where is the cabin air filter located in a Volvo S40?

Volvo S40's cabin air filter is located inside the glove compartment on the front passenger side. To access it, remove the side panel of the transmission, take off the lower cover of the glove box, carefully disconnect the wiring, and remove the fuse box to reveal the cabin air filter cover. The Volvo S40 is a vehicle designed to monitor the driver's workload and delay displaying secondary information to allow full concentration on driving. The Volvo S40 features an extremely rigid torsion-resistant body and the latest chassis design, providing a flexible yet secure driving experience. This car measures 4467mm in length, 1770mm in width, and 1454mm in height. It is powered by a 2.4L naturally aspirated engine delivering 170 horsepower and 230 Nm of torque, with a 0-100 km/h acceleration time of 8.9 seconds.

2

4

Share

What is the fuel tank capacity of the Atenza in liters?

The fuel tank capacity of the Atenza is 58 liters. The Atenza is a mid-size car launched by FAW Mazda, with body dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, and a wheelbase of 2830mm. In terms of exterior design, the front face features a very sporty grille and headlight design. The starry grille also provides an aesthetically pleasing visual effect, and the headlights, except for the turn signals, all use LED light sources. From the side view, the Atenza's waistline adopts a more rounded design, and under the influence of the KODO design philosophy, the side profile still showcases the car's elegant and stylish temperament.

13

0

Share

What does the 'ES' after Buick GL8 mean?

Buick GL8 with 'ES' indicates that this vehicle is equipped with a 2.0-liter turbocharged engine version. In addition, the GL8 with 'ES' differs in appearance from the standard GL8 model. The ES version of GL8 features more elongated headlights and a sleeker body design, making it appear more youthful and stylish compared to the standard GL8. The GL8 is an MPV model produced by SAIC-GM Buick, with body dimensions of 5256mm in length, 1878mm in width, and 1776mm in height. In terms of transmission, all Buick GL8 models are equipped with a 6-speed automatic transmission. Regarding powertrain options, the Buick GL8 is available in both 2.5-liter naturally aspirated and 2.0-liter turbocharged versions. As for the drivetrain configuration, all Buick GL8 models adopt front-wheel drive.

4

1

Share

How to adjust the time on the Volkswagen Passat dashboard?

Method to adjust the time on the Volkswagen Passat dashboard: 1. After turning on the car, the CLK button displays and sets the time; 2. Press and hold the CLK button for about 5 seconds until the time display starts flashing; 3. Use the adjustment buttons (turn left to decrease, turn right to increase); 4. Use the selection buttons to adjust the hour and minute separately; 5. After setting the time, press the CLK button again to confirm. The Passat is a mid-size sedan designed by Volkswagen AG in Germany, with body dimensions of 4933 mm in length, 1836 mm in width, and 1469 mm in height. In terms of power, the main models of the Passat are equipped with three types of engines: the EA211 1.4TSI turbocharged engine, the third-generation EA888 Efficient Edition 2.0TSI engine, and the third-generation EA888 High-Performance Edition 2.0TSI engine.

19

1

Share

Should the Handbrake Be Applied When in Neutral Gear?

Whether to apply the handbrake when in neutral gear depends on the situation. On level ground, it is generally not necessary to apply the handbrake. However, in practice, it is recommended to always apply the handbrake when shifting to neutral gear. The reasons are: 1. Visual assessment may not always be accurate; 2. The car may move due to external forces (objective factors). Even if the ground is confirmed to be level and the car won't roll, it's difficult to guarantee that the car won't be subjected to external forces. For example, in the event of a rear-end collision, the vehicle may still move if the handbrake is not applied. Applying the handbrake can prevent the vehicle from sliding or rolling. In real-world scenarios, it's important to respond flexibly based on the actual situation. For instance, when waiting at a traffic light that is about to turn green in a few seconds, there's no need to apply the handbrake—simply keeping the foot on the brake pedal is sufficient. Once the light turns green, pressing the accelerator allows for a quick and easy start.

8

2

Share

What car has the V logo?

What is the function of a car stabilizer bar?

Where is the cabin air filter located in a Volvo S40?

What is the fuel tank capacity of the Atenza in liters?

What does the 'ES' after Buick GL8 mean?

How to adjust the time on the Volkswagen Passat dashboard?

Should the Handbrake Be Applied When in Neutral Gear?

What does the vehicle stop mean?

How to adjust the seat in Qoros 5?

What do 4H and 4L mean in four-wheel drive vehicles?

What is the shelf life of an unopened car battery?