What car has the character 'Song' as its logo?

What type of oil should be added to the Verna?

The Verna uses 5W20 engine oil. The number before the W indicates cold resistance - the smaller the number, the better the cold resistance. In northern winters, 0W or 5W oil is recommended. The number after W represents the oil viscosity - the larger the number, the higher the viscosity and better protective performance. The Verna is a model jointly designed and developed by Beijing Hyundai, Hyundai North America, and the European Design Center. Its body dimensions are 4340mm in length, 1700mm in width, and 1460mm in height, with a wheelbase of 2570mm. In terms of appearance, the Verna's body design adopts Hyundai's commonly used "Fluidic Sculpture" concept, featuring dynamic and smooth body lines that highlight a youthful and passionate image.

17

1

Share

Is It Good to Fill Up the Tank Every Time?

Filling up the tank every time is not good for the car. Here are the specific hazards of overfilling the fuel tank: 1. Gasoline evaporation is unpleasant and carcinogenic: The charcoal canister is usually located near the fresh air intake for the cabin. When the tank is overfilled, the charcoal canister becomes saturated, and excessive pressure causes it to release fumes containing gasoline components into the cabin, posing health risks to passengers. 2. Damage to the charcoal canister: The charcoal canister is typically installed between the fuel tank and the engine. Since gasoline is a volatile liquid, the fuel tank often contains vapor at normal temperatures. The fuel evaporation emission control system directs these vapors into the combustion process to prevent them from escaping into the atmosphere. The activated charcoal canister plays a crucial role in this process. If the tank is overfilled, liquid gasoline instead of vapor enters the charcoal canister, causing damage. 3. Clogged vent hole: If the engine fails to start after refueling, it may be due to an overfilled tank. Once the vent hole is clogged, negative pressure builds up in the fuel tank, leading to poor fuel supply or even a complete lack of fuel delivery.

16

5

Share

Why can't the car start after jump-starting the battery?

Ensure that the connected battery voltage is normal. Additionally, make sure the power cables are thick enough and the connections are secure. If everything is confirmed to be normal, there might be issues with other parts of the vehicle. It is recommended that the owner tow the vehicle to a 4S shop for repair. Especially in winter, there are many cases where cars cannot start and require a jump-start, but some car owners are not familiar with the jump-start process. Your vehicle and the rescue vehicle that has started must remain turned off; The wiring sequence is to first connect your car's positive terminal to the rescue vehicle's positive terminal, then connect your car's negative terminal to the rescue vehicle's negative terminal; After confirming that all equipment in the car is turned off, start the rescue vehicle, then start the electric car, and let the electric car run for a while to charge after normal operation; After the vehicle is running normally, when removing the cables, remember to follow the reverse order of the wiring sequence.

11

0

Share

Where is the license plate with 'Zhe G' from?

Zhe G is the license plate code for Jinhua City, Zhejiang Province. The license plate codes for various regions in Zhejiang Province are as follows: Zhe A for Hangzhou City, Zhe B for Ningbo City, Zhe C for Wenzhou City, Zhe D for Shaoxing City, Zhe E for Huzhou City, Zhe F for Jiaxing City, Zhe G for Jinhua City, Zhe H for Quzhou City, Zhe J for Taizhou City, Zhe K for Lishui City, and Zhe L for Zhoushan City. License plates are plates attached to the front and rear of vehicles, typically made of aluminum, sheet metal, plastic, or paper, engraved with the vehicle's registration number, registration region, or other relevant information. License plates serve as a numbering and information registration system for vehicles, primarily allowing identification of the vehicle's region of registration and enabling the lookup of the vehicle's owner and registration details based on the plate.

14

4

Share

How should a new car be inspected within six years?

According to the latest regulations, new cars within six years are exempt from inspection, and the requirement for stamping on the vehicle registration certificate has been canceled. You only need to obtain an exemption inspection label. According to Article 95 of the Road Traffic Safety Law, vehicles without an inspection label, compulsory traffic insurance label, license plate, driver's license, or vehicle registration certificate can be impounded. A fine of 20-200 yuan will be imposed, and 1 point will be deducted from the driver's license. According to the 2019 vehicle inspection regulations, new cars are exempt from inspection for six years. If your car falls within the 6-year exemption range, there is another prerequisite: only vehicles meeting the following criteria can be exempt from inspection; otherwise, they must undergo on-site inspection: vehicles that have not been involved in accidents causing casualties; vehicles that have not been penalized for illegal modifications; and vehicles registered within 4 years from the date of manufacture. For vehicles that meet all the criteria, you can apply for an inspection exemption label every two years within the six-year period, specifically in the 2nd and 4th years. The exemption process is no longer as cumbersome as before, where you had to visit the vehicle management office. Now, you can apply for the inspection label anywhere using the "Traffic Management 12123" mobile app.

10

5

Share

Solutions for the Rumbling Sound in EA211 Engine?

Dada abnormal noise situation and solutions: The first type: The upper part of the engine makes a dada sound. First, ensure that the oil level, oil pressure, and water temperature are normal. Then, use a stethoscope on the exhaust side of the valve cover to determine if the sound is coming from the valve cover, and the noise frequency increases with the engine speed. This situation is caused by the failure of the hydraulic tappet, and the hydraulic tappet needs to be replaced. The second type: A dada sound is heard in the middle part of the engine. First, ensure that the oil, cylinder pressure, valves, valve rocker arms, hydraulic tappets are normal, and check if there are any fault indications in the engine. Then, use a stethoscope to determine if the abnormal noise is coming from the middle part. If the sound also increases in frequency with the engine speed, the connecting rod assembly needs to be replaced, as the noise is caused by excessive clearance between the piston pin and the small end of the connecting rod. The third type: There is a metal friction sound in the front part of the engine, especially noticeable during rapid acceleration at 2000-2500 rpm. In this case, check if the turbocharger is functioning properly. If this issue is confirmed, it is necessary to go to a repair facility for inspection.

4

2

Share

What car has the character 'Song' as its logo?

What type of oil should be added to the Verna?

Is It Good to Fill Up the Tank Every Time?

Why can't the car start after jump-starting the battery?

Where is the license plate with 'Zhe G' from?

How should a new car be inspected within six years?

Solutions for the Rumbling Sound in EA211 Engine?

What Causes a Car Alarm to Go Off for No Reason?

How to Remove the Rear Seat Cushion of the Nissan Sylphy Classic?

Where Can I Learn to Make Car Keys?

Which Tire is Better: Goodyear or Kumho?