What Car Has the 'A' Logo?

What Causes Water Under the Rear Seat Car Mat?

Water under the rear seat car mat may be caused by various reasons such as a leaking drain plug at the bottom of the car compartment, a leaking sunroof drain pipe, a leaking door, a leaking heater core (causing antifreeze leakage), a damaged or improperly installed air conditioning drain pipe, among other possibilities. There are multiple potential causes: sunroof leakage due to poor sealing—check the sunroof; water from car washing that wasn’t properly cleaned; or rust in the car’s small radiator (used for cabin heating), leading to leakage. To check if the sunroof drain pipe is clogged, fully open the sunroof to reveal a groove. Slowly pour water into this groove (the sunroof drain pipe) and observe whether the water drains properly or is blocked.

17

0

Share

How to Check Vehicles Registered Under Your Name?

Bring your ID card to the local vehicle management office for inquiry. Below is relevant information about vehicles registered under an individual's name: 1. Notes on inquiry: Generally, vehicle information cannot be queried online using an ID card and name. Due to strict vehicle registration management, only specific authorities or individuals can access this information through designated methods. Such queries are usually not open to the public, and you must bring your ID card to the local vehicle management office for inquiry. 2. Handling multiple vehicles under one name: If an individual has 2 or more passenger cars registered in the same city, starting from 2021, they can submit an online application through the Passenger Car Quota Regulation Management Information System website to transfer vehicle registration to eligible spouses, children, or parents.

17

3

Share

How to Display Tire Pressure in Lavida?

Lavida's tire pressure monitoring is automatic and will alert if there is any abnormality in tire pressure. Here is additional information: 1. The SET in the new Lavida is the tire pressure monitoring system. When the SET light is on, it indicates abnormal tire pressure, either too high or too low. 2. After changing the tire inflation pressure or replacing the wheels, turn on the ignition, press and hold the SET button of the tire pressure control system until the indicator light on the dashboard comes on. Inflate all tires to the specified pressure, then turn on the ignition. Press and hold the SET button, and the warning light on the instrument panel will illuminate. It will turn off after confirming the storage of the new parameters. 3. The tire pressure monitoring system automatically monitors the tire pressure in real-time while driving and alerts for tire leaks or low pressure to ensure driving safety.

7

3

Share

How to Handle Speeding Less Than 10%?

According to regulations, speeding within 10% of the prescribed speed limit is not subject to penalties but will result in a warning. Relevant details are as follows: 1. Penalty: Speeding between 10% and 20% above the prescribed limit incurs a fine of 50 RMB and 3 demerit points. 2. Overtaking: Vehicles speeding within 10% of the limit face no fines or demerit points. Speeding between 10% and 20% above the limit results in 3 demerit points and a 50 RMB fine. Speeding between 30% and 50% above the limit incurs 6 demerit points and a 100 RMB fine.

14

4

Share

How to Reset the Maintenance Reminder for Toyota Sienna?

Here is the method to reset the Toyota maintenance light: 1. With the ignition switch off, press and hold the "Reset" button. 2. Turn on the ignition switch. 3. Release the "Reset" button and briefly press the "Clock Adjustment" button once. 4. The maintenance cycle display will enter reset mode and return to normal after several seconds. Here is some additional information: 1. The original purpose of the car maintenance light is to remind the owner to perform maintenance as soon as possible. Therefore, the owner should promptly visit a 4S shop for maintenance. After the maintenance is completed, the 4S shop will use a diagnostic tool to reset the maintenance light. 2. The quickest and most accurate method to reset the maintenance reminder light is to use a diagnostic tool. Generally, individual car owners do not have such equipment. It is recommended to reset the light at a 4S shop after maintenance or visit an external 4S shop for resetting.

6

3

Share

How to Determine if the Generator is Broken?

Methods to determine if the generator is broken: 1. The charging indicator light on the dashboard will illuminate, and the battery power will deplete quickly; 2. The generator may produce abnormal noises or emit a burnt smell when running; 3. After starting the generator for a few minutes and then turning it off, touch the generator. If it is very hot, it may indicate a short circuit, requiring replacement. The car generator is the main power source of the vehicle, functioning to supply power to all electrical devices (except the starter) and charge the battery when the engine is running normally (above idle speed). Based on the three-phase stator winding of a standard AC generator, additional winding turns and lead-out terminals are added, along with an extra set of three-phase bridge rectifiers. At low speeds, the output is from the original and additional windings in series, while at higher speeds, only the original three-phase winding provides the output.

12

4

Share

What Car Has the 'A' Logo?

What Causes Water Under the Rear Seat Car Mat?

How to Check Vehicles Registered Under Your Name?

How to Display Tire Pressure in Lavida?

How to Handle Speeding Less Than 10%?

How to Reset the Maintenance Reminder for Toyota Sienna?

How to Determine if the Generator is Broken?

What does Toyota KDSS mean?

Where to Go for Driver's License Renewal Upon Expiration?

What is the difference between a 7-speed dual-clutch and an 8-speed automatic manual transmission?

What is the formula for converting engine net power to horsepower?