What car has five vertical dots?

1 Answers
Nick
07/29/25 6:58pm
Five vertical dots represent WM Motor. Taking the WM EX5 as an example: it is the first car produced by WM Motor, positioned as a compact pure-electric urban SUV, with a length of 4585mm, a width of 1835mm, and a height of 1672mm. The WM EX5 uses a ternary lithium battery, with a pure-electric range of 400km according to the Ministry of Industry and Information Technology. The fast charging time is 0.5 hours, and the slow charging time is 8.4 hours. The WM EX5 is equipped with a pure-electric engine with 218 horsepower, a total power of 150kw, and a total torque of 325nm, with a 0-100km/h acceleration time of 8.4 seconds. The WM EX5 offers a four-year or 120,000-kilometer vehicle warranty, with a separate eight-year or 150,000-kilometer warranty for the battery pack.
Was this review help?
13
0
Share
More Forum Discussions

What is the fuel consumption of the Transit 2.8T diesel?

The fuel consumption of the 2.8T Transit is approximately 9 liters per 100 kilometers. Below is relevant information about the 2.8T Transit: 1. The Transit's 2.8-liter turbocharged diesel engine: It delivers 108 horsepower and a maximum torque of 260 Nm. This engine reaches its maximum power at 3600 rpm and its maximum torque at 2100 rpm. It features direct injection technology. Although turbocharged diesel engines do not have high horsepower, they provide substantial torque, making them particularly suitable for trucks. 2. Gasoline version: The gasoline version is equipped with a 2.4-liter naturally aspirated engine, which has a maximum power of 92 kW and a maximum torque of 196 Nm. The engine reaches its maximum power at 2500 rpm and its maximum torque at 2800 rpm. This engine utilizes multi-point fuel injection technology and is constructed with an aluminum cylinder head and an iron cylinder block.
11
3
Share

How to Deal with Someone Deliberately Blocking Your Car?

You can call the police if someone deliberately blocks your car. Relevant information: 1. Penalty: Deliberately blocking a car is considered an act of illegally restricting another person's personal freedom. Depending on the situation, the offender may receive criticism and education, or a reprimand; if the circumstances are more serious, they may be subject to public security management penalties. 2. Legal basis: According to Article 40 of the "Public Security Administration Punishment Law," anyone who commits any of the following acts shall be detained for not less than 10 days but not more than 15 days and shall also be fined not less than 500 yuan but not more than 1,000 yuan: organizing, coercing, or deceiving persons under the age of 16 or disabled persons to perform terrifying or cruel performances; forcing others to work through violence, threats, or other means; illegally restricting another person's personal freedom, illegally intruding into another person's residence, or illegally searching another person's body.
7
1
Share

How to Deal with a Blurry Rear Car Camera?

There are different solutions for a blurry rear car camera depending on the situation: 1. If the camera lens is covered with dust or dirt: Simply clean it with a clean cloth. 2. If the blurriness is caused by water ingress: Use a hot air blower to blow on the camera for a few minutes. Additionally, it's best to remove the camera, apply some glue for sealing to prevent future water leakage. 3. If the blurriness is due to prolonged use: This may result in poor chip sensitivity, and even snowflake-like interference. However, such chip abnormalities are beyond the scope of DIY repairs, and it's necessary to visit a repair shop for inspection, repair, or replacement.
12
3
Share

What Size Auxiliary Battery Can the Original Vehicle Alternator Charge?

The original vehicle alternator can charge an 80A auxiliary battery. Related information: 1. Introduction: The car alternator is the main power source of a vehicle, whose function is to supply power to all electrical devices (except the starter) while the engine is running normally (above idle speed), and simultaneously charge the battery. 2. Expansion: Based on the three-phase stator winding of a conventional alternator, the number of winding turns is increased with lead-out terminals, adding a set of three-phase bridge rectifier. At low speeds, the output is provided by the series connection of the original and additional windings, while at higher speeds, only the original three-phase winding provides the output.
4
2
Share

How to Adjust the 10-Band Equalizer in a Car for Crisp Sound Quality?

The equalizer can only adjust the style, not improve the sound quality. Therefore, the 10-band equalizer in a car cannot be adjusted for crisp sound quality. When adjusting the audio equalizer, be careful not to significantly increase or decrease a certain frequency; fine-tuning is sufficient, or you can choose the system's built-in modes. Below is an introduction to the best settings for a 10-band equalizer in a car: 1. Bass-heavy: First band +5; Second band +4; Third band +6; Fourth band +2; Fifth band 0; Sixth band 0; Seventh band 0; Eighth band 0; Ninth band 0; Tenth band 0. 2. Vocal-heavy: First band -2; Second band -3; Third band -4; Fourth band 0; Fifth band +1; Sixth band +4; Seventh band +3; Eighth band +2; Ninth band -1; Tenth band -2. 3. Rock-heavy: First band +4; Second band +2; Third band +3; Fourth band +1; Fifth band 0; Sixth band +1; Seventh band 0; Eighth band +2; Ninth band +1; Tenth band +2.
12
5
Share

Does Car Waxing Require Polishing?

Car waxing requires polishing. Polishing is done to smooth out minor scratches on the car's paint surface, as well as any uneven areas caused by oxidation or dirt. In short, polishing ensures a more perfect wax application. The method for car waxing is as follows: First, wash the car thoroughly, preferably using a dedicated car wash solution to ensure it is completely clean. Then, use a drying cloth to thoroughly dry the car, as water on the paint surface can interfere with waxing. Move the car to a shaded area and prepare for waxing. Next, use a round sponge specifically designed for solid car wax to apply the wax evenly onto the paint surface. A thin layer is sufficient; there's no need for a thick application. After application, wait 5-10 minutes to allow the wax to dry completely. Finally, use a microfiber towel to polish the paint surface, similar to shining shoes. The benefits of car waxing: As a traditional aspect of car detailing, waxing primarily serves to waterproof and protect against acid rain. The protective layer of wax significantly reduces the amount of water droplets that adhere to the car's surface, with a very noticeable effect. Additionally, it provides protection against high temperatures and UV rays. With increasingly hot weather, cars that are driven or parked outdoors year-round are prone to paint aging and fading due to sunlight. The thin film formed by waxing reflects some of the light, effectively preventing paint aging. Moreover, car wax can prevent static electricity and, consequently, dust buildup.
9
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.