What car has a V-shaped logo?

1 Answers
JasonLynn
07/29/25 12:07pm
There are two car models with V-shaped logos. One is Changan Automobile, and the other is Hyundai Equus. Below are the relevant introductions about these two car models: 1. Changan Automobile, fully known as Chongqing Changan Automobile Co., Ltd., is a core vehicle enterprise under China Ordnance Equipment Group Corporation. Its history can be traced back to the Westernization Movement, originating from the Shanghai Arsenal established in 1862, which pioneered China's modern industry. With the tide of China's reform and opening up, Changan officially entered the automotive field in the early 1980s. In 1996, it was registered and became a highly competitive listed company. 2. Changan Automobile is a well-known Chinese automobile manufacturer and a leader in Chinese brand vehicles. It is the first Chinese brand automaker to achieve cumulative production and sales exceeding 10 million vehicles, maintaining the top sales position among Chinese brand vehicles for 10 consecutive years. It owns renowned automotive brands such as the CS series, Raeton, Eado, Alsvin, and Benben. 3. The Equus was born in 1999 as a model under Hyundai Motor, with the English name Equus. It is not sold domestically but is available as an imported car. The Equus is positioned as a luxury car (D-segment), competing with top luxury sedans such as the BMW 7 Series, Lexus LS series, Mercedes-Benz S-Class, and Audi A8.
Was this review help?
14
4
Share
More Forum Discussions

What are the tips for memorizing the route map in Subject 3?

You can use paper to note down the sequence of road sections, such as straight driving first, followed by traffic lights, and then passing through deceleration zones, etc. Here is the relevant introduction: 1. Reasons for nervousness: Being unfamiliar with the Subject 3 route is not the most important reason for nervousness; lack of technical proficiency is. However, this statement is not entirely accurate, as all are beginners learning to drive, and their skills are generally average. Some coaches are more responsible and may take students around the test site several times before the exam to familiarize them with the area, while others might even allow students to take the exam without any simulation training. 2. Mindset: If you encounter an irresponsible coach, you should spend more time during regular practice to memorize driving techniques. Some students perform effortlessly during training but repeatedly fail in the actual exam, so developing a good mindset is also crucial.
15
1
Share

What is the correct way to use the choke on a Jialing 125 motorcycle?

Jialing 125 motorcycle choke should be set to the lowest position, which means fully open. Here are detailed instructions about motorcycle choke: 1. Overview: The choke is a unique device in carburetor-type gasoline engines that adjusts the mixture concentration for easier starting. Normally it should remain in the open position. Also called an air choke, it regulates the amount of air entering. 2. Principle: There are two working principles for chokes - one reduces air intake while the other increases fuel intake. Both aim to enrich the air-fuel mixture, making cold engine starts easier.
6
2
Share

Where to Find the Chassis Number of a Volkswagen Vehicle?

Here are the methods to locate the chassis number of a Volkswagen vehicle: 1. Check the accompanying documents: The chassis number can be found on some of the vehicle's accompanying documents. The vehicle license clearly marks the chassis number, and it is also recorded or pasted on the insurance policy and the vehicle maintenance manual. This method is generally applicable to vehicles of various brands. 2. External inspection of the vehicle: The chassis number can be directly seen on the exterior of the vehicle. The most common location is on a label at the lower left corner of the windshield, which records the 17-digit chassis number. Additionally, the chassis number is also recorded on the vehicle's model nameplate, commonly found on the left side of the dashboard, in the engine compartment, on the door lock pillar or door edge pillar, and on the door hinge pillar. These locations not only display the chassis number but also key information such as the manufacturing date, engine model, and vehicle origin. The exact location may vary depending on the brand and model. 3. Stamped number: The chassis number is stamped onto the vehicle body during manufacturing, which is useful for registration or transfer purposes to identify the vehicle's structure. Common locations for the stamped number include under the seats, near the shock absorber in the engine compartment, and on the body frame in the trunk.
9
2
Share

Why Did the Truck Horn Suddenly Stop Working?

The reasons why a truck horn suddenly stops working are as follows: 1. Contact Erosion: If the horn is pressed for a long time, it can easily cause the horn contacts to erode, creating a certain level of impedance that weakens the current flowing through the electromagnetic coil (reducing the electromagnetic force). At this point, it will certainly be unable to attract the armature to drive the diaphragm to vibrate normally, resulting in a hoarse sound from the horn or even complete silence. However, when the horn is pressed repeatedly, the instantaneous current generated may pass through the impedance caused by the eroded contacts, allowing the horn to function normally. 2. Moisture Due to Poor Sealing: Although most car horns on the market are well-sealed, this sealing tends to degrade over time. Therefore, when cleaning the interior, special attention should be paid to the horn's position to prevent water vapor from entering the horn. Otherwise, moisture can affect the horn's performance, directly impairing its sound quality and, in severe cases, causing the horn to stop working altogether. 3. Poor Contact at Electromagnetic Coil Terminals: Some horns have electromagnetic coil terminals that are not connected by soldering but by aluminum metal rivets crimped together. If the insulation paint on the enameled wire ends is not properly treated or the rivets are not crimped tightly, poor contact (false connection) can easily occur, leading to intermittent horn functionality.
4
5
Share

Does Fully Depressing the Clutch in Subject Two Count as an Intermediate Stop?

Fully depressing the clutch in Subject Two counts as an intermediate stop. Below are detailed explanations regarding Subject Two: 1. Introduction: An intermediate stop, as the name suggests, refers to the vehicle's speed dropping directly to 0 during the test. Additionally, turning the steering wheel too sharply increases wheel resistance, which can also lead to a brief stop. The detection system in the test vehicle is highly sensitive and will immediately record any stop. 2. Avoiding Intermediate Stops: During the test, when passing over uneven ground or the seams between cement blocks in the test area, slightly increase the vehicle speed. When turning the steering wheel sharply, slightly release the clutch to prevent an intermediate stop. When straightening the wheel, gently press the clutch to control the vehicle speed.
11
4
Share

What are the reasons for poor cooling in sedans?

The reasons for poor cooling in sedans include insufficient Freon in the air conditioning system and blocked pipes in the air conditioning system. Here are the specific details: 1. Insufficient Freon in the air conditioning system: Freon, as a medium that can absorb heat, can effectively remove heat and lower the temperature inside the car only when there is enough Freon in the car's air conditioning system. If the amount of Freon in the system is insufficient due to prolonged use, lack of regular replenishment, pipe leakage, or air mixing, it cannot absorb enough heat, and thus cannot effectively reduce the temperature inside the car, resulting in insufficient cooling. 2. Blocked pipes in the air conditioning system: In the car's air conditioning system, there are numerous pipes connecting the condenser to the evaporator, through which a large amount of refrigerant flows. If any part of these pipes is blocked by small debris, the flow of the refrigerant will be obstructed, preventing effective heat transfer and the removal of heat from the car's interior. In such cases, the temperature inside the car will not decrease, and the cooling effect of the air conditioning will not be noticeable.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.