What car has a straight-line taillight at the rear?

Will insurance cover a windshield crack caused by a stone?

If the windshield damage to the car is not caused by a traffic accident, the insurance company will not compensate for it. The specific reasons are as follows: 1. According to Article 5 of the "Motor Vehicle Loss Insurance Terms", during the insurance period of this contract, if the insured vehicle is damaged due to an accident, the company shall bear the liability for compensation in accordance with the provisions of this contract. 2. According to Article 6 of the "Motor Vehicle Loss Insurance Terms", when an insurance accident occurs, the necessary and reasonable expenses incurred by the insured in rescuing and protecting the insured vehicle in accordance with the provisions of this contract shall be compensated by the company. 3. According to Article 7 of the "Motor Vehicle Loss Insurance Terms", the company shall not be liable for compensation for the part that should be compensated by other responsible parties of the accident in accordance with the provisions of the compulsory liability insurance contract for motor vehicle traffic accidents.

18

2

Share

What Are the Symptoms of a Faulty Camshaft Sensor?

The manifestations of a faulty camshaft sensor include difficulty in ignition, hard starting, unstable idle, inability to accelerate, weak engine performance, increased fuel consumption, vehicle shaking, persistent illumination of the malfunction indicator light, sudden engine shutdown when the car is hot, jerky driving, and accelerated engine wear. Below is an introduction to the camshaft position sensor: 1. Working Principle: The camshaft position sensor is the main control signal for ignition. When the sensor shaft rotates with the crankshaft and the camshaft, the light-transmitting holes and opaque sections on the signal disk pass between the LED and the phototransistor. The light emitted by the LED is alternately blocked and transmitted by the signal disk, thereby alternately illuminating the phototransistor of the signal generator. This generates pulse signals corresponding to the crankshaft and camshaft positions in the signal sensor. 2. Function: The camshaft position sensor collects the position signal of the camshaft and inputs it into the ECU, enabling the ECU to identify the top dead center of the cylinder compression for sequential fuel injection control, ignition timing control, and knock control. Additionally, the camshaft position signal is used to identify the first ignition timing during engine startup.

6

4

Share

What are the symptoms of a bent engine connecting rod?

If the engine connecting rod is slightly bent or deformed, it may result in the engine failing to start. After starting, the engine may exhibit unstable idling, severe shaking, and accompanied by knocking sounds. Additionally, professional tools are required for measurement, which needs to be conducted at a repair shop. Extended Information: The following are the causes of a bent engine connecting rod in a car: 1. Water entering the engine cylinder: As the amount of water increases, it accumulates on top of the piston, reducing the effective volume of the combustion chamber, increasing compression resistance, and consequently increasing the pressure transmitted from the piston to the connecting rod. 2. Abnormal engine fuel injection system: This situation is usually caused by continuous fuel injection from one of the engine's injectors. Symptoms often include difficulty starting, unstable idling, black smoke from the exhaust pipe, and reduced power. 3. Connecting rod seizing with the crankshaft: This is generally caused by poor engine lubrication and can be determined by checking the wear condition of internal engine components. 4. Issues with the connecting rod itself: This can usually be confirmed through methods such as chemical composition analysis of the connecting rod material, hardness testing, metallographic examination, and scanning electron microscope fracture analysis.

19

2

Share

How Many Parts Does Subject Three Consist Of?

Subject Three examination includes the following parts: 1. Basic operations: vehicle preparation, simulated lighting test, starting, driving in a straight line, gear shifting operations, lane changing, and parking by the roadside. 2. Driving operations: proceeding straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crossings, passing through school zones, passing through bus stations, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. Below is relevant information about Subject Three: 1. Introduction: Subject Three, also known as the road safety driving test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles eligible for driving. 2. The safe and civilized driving knowledge test includes: requirements for safe and civilized driving operations, knowledge of safe driving under adverse weather and complex road conditions, methods for handling emergencies such as tire blowouts, and knowledge of post-accident handling procedures.

16

2

Share

What is the Difference Between a Used Car with 2 and 3 Ownership Transfers?

Here are the differences between a used car with 2 and 3 ownership transfers: 1. Different number of transfers: A used car with two ownership transfers is considered a second-hand vehicle in China. A car with three ownership transfers has undergone three sales transactions, meaning three transfer procedures. 2. Different values: As the number of ownership transfers increases, the selling price of the car tends to decrease. The most significant selling point of used cars is their affordability. With the same amount of money needed to buy a new car, you can purchase a higher-grade used car. A car with three ownership transfers is even cheaper than a regular used car. 3. Different safety levels: Used cars can still be used until they reach the national scrapping standards or the end of their economic service life. However, cars with three ownership transfers generally have a shorter lifespan, and their corresponding safety performance may also decline.

4

3

Share

Where is the Prado engine number located?

Prado engine number is located on the engine block. The Prado is a mid-to-large SUV with exterior dimensions of 4840mm in length, 1885mm in width, and 1890mm in height. It has a wheelbase of 2790mm, a minimum ground clearance of 215mm, a fuel tank capacity of 87 liters, and a curb weight of 2285kg. The Prado is equipped with a 3.5L V6 naturally aspirated engine, delivering a maximum horsepower of 280hp and a maximum torque of 365Nm at 4500rpm. The engine produces a maximum power of 206kW at 6000rpm.

4

3

Share

What car has a straight-line taillight at the rear?

Will insurance cover a windshield crack caused by a stone?

What Are the Symptoms of a Faulty Camshaft Sensor?

What are the symptoms of a bent engine connecting rod?

How Many Parts Does Subject Three Consist Of?

What is the Difference Between a Used Car with 2 and 3 Ownership Transfers?

Where is the Prado engine number located?

What is the warranty period for car batteries?

How Many Years Are New 7-Seater Vehicles Exempt from Inspection?

Reasons for Car Body Shaking When Lightly Pressing the Accelerator

What's the reason for the transmission not shifting up?