What car has a snake logo?

1 Answers
RachelAnn
07/24/25 10:18am
A car with a snake logo is the Ford Mustang Cobra, which is a racing sports car. Taking the 2020 Ford Mustang as an example, it belongs to the sports car category with the following dimensions: length 4794mm, width 1916mm, height 1391mm, wheelbase 2720mm, fuel tank capacity 58.9l, and curb weight 1702kg. The 2020 Ford Mustang features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 2.0L turbocharged engine, delivering a maximum horsepower of 299PS, maximum power of 220kW, and maximum torque of 434Nm, paired with a 10-speed automatic transmission.
Was this review help?
1
2
Share
More Forum Discussions

What does 1.8td mean?

1.8td refers to turbocharged direct injection, where 't' stands for turbocharging and 'd' represents direct injection technology. Its primary function is to increase the engine's air intake, thereby enhancing the engine's power and torque, resulting in stronger horsepower for the vehicle. Here are some relevant details: 1. After applying turbocharging technology, the engine can output greater power, improving fuel economy and reducing exhaust emissions. 2. The differences between a direct injection engine and a port fuel injection engine are: (1) Under high or full load conditions, the direct injection engine injects fuel into the combustion chamber during the intake stroke. Since the fuel spray's movement speed is slower than the piston's downward speed, the pressure around the fuel spray is lower, causing the fuel to rapidly diffuse and evaporate, forming a homogeneous combustion mixture. (2) The heat absorbed during fuel evaporation lowers the cylinder temperature, enhancing anti-knock performance. This allows the direct injection engine to use a higher compression ratio, improving the engine's thermal efficiency.
13
4
Share

How to Replace the Cabin Air Filter in a Magotan B8?

Here are the steps to replace the cabin air filter in a Magotan B8: 1. The cabin air filter is located below the glove box on the passenger side. Unscrew the two knobs on the cover plate and remove it; 2. After removing the cover plate, there is a red arrow indicating the direction. Use both hands to remove the cabin air filter, avoiding excessive force that may cause breakage; 3. Install the new filter and reattach the cover plate. Additional information: The Magotan B8 is a mid-size sedan produced by FAW-Volkswagen, with body dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, and a wheelbase of 2871mm. The vehicle features a MacPherson strut front suspension and a multi-link rear suspension. The interior design adopts a smooth and elegant European style, adhering to ergonomic principles and efficient design concepts.
6
0
Share

Why won't a manual transmission car start despite having electricity and fuel?

When a manual transmission car has electricity and fuel but won't start, it's generally either a fuel system issue or a power supply problem. Possible causes include clogged fuel lines or problems with the ignition coil and spark plugs. Here are methods to identify the issue: 1. Check the car's "timing" - incorrect timing can also cause a car with fuel and electricity to fail to start, which is a relatively common reason. However, not all cars use timing belts; some use timing chains, where the probability of timing inaccuracy is lower. 2. Inspect the spark plugs to determine if replacement is needed. Generally, spark plugs should be replaced every 40,000 kilometers, but this depends on the material of the spark plugs, with platinum spark plugs having the longest lifespan. 3. Check the fuel injectors. If the car has fuel and electricity but won't start, it may be related to clogged fuel injectors. Excessive carbon buildup or complete blockage of the injectors can affect gasoline atomization, preventing ignition. Therefore, regular maintenance at a 4S shop is essential. 4. Examine the intake pipe to see if it's blocked. If the intake pipe is obstructed, air cannot enter, making it impossible to start the car since gasoline combustion requires oxygen.
3
5
Share

What Causes Difficulty in Steering Wheel Rotation After Multiple Reversing Maneuvers?

It is possible that heavy braking during reversing triggered the auto start-stop system, causing the power steering system to lose power; alternatively, prolonged steering wheel rotation may have activated the system's overheating protection or damaged the power steering pump. Owners should promptly send the vehicle for inspection and repair. The reasons for a heavy steering wheel are as follows: 1. Insufficient power steering fluid: Power steering fluid is a medium oil used in the vehicle's power steering pump, serving to transmit steering force and provide cushioning. This fluid requires regular replacement, and leaks should be checked. When the power steering fluid is insufficient, the steering will feel heavy and stiff. 2. Low tire pressure: Low tire pressure increases the contact area between the tires and the road surface, raising friction and making steering more difficult, resulting in a heavy steering wheel. This is not conducive to driving safety, and tire pressure should be promptly replenished in such cases. 3. Overly tight bearing fit: For the rolling bearings connected to various steering systems, if they fit too tightly with sliding bearings, it can prevent proper lubrication and operation, leading to sticking phenomena and a heavy steering wheel. In such cases, the mechanical parts and power steering system should be inspected, or checked for oil leaks and damaged intake manifold seals. 4. Power steering system issues: The steering wheel and power steering system are closely related. Therefore, when the steering wheel becomes very heavy, it is likely that there are internal issues in the power steering system, such as poor electrical contact or other problems. In such cases, the vehicle should be taken to a 4S shop for inspection and repair.
18
4
Share

What are the situations where auto damage insurance does not cover?

Auto damage insurance does not cover the following situations: 1. Driving without a license: 1.1 No driver's license or the driver's license has expired. 1.2 The insured vehicle being driven does not match the vehicle type specified on the driver's license. 1.3 Driving the insured vehicle with a driver's license that has not been reviewed as required, or driving during the period when the license is temporarily suspended, detained, revoked, or canceled. 1.4 Driving the insured vehicle under any other circumstances not permitted by laws, regulations, or the relevant provisions of the traffic management department of the public security organ. 2. Drunk driving: Driving under the influence of alcohol is a serious violation of the "Road Traffic Management Regulations" and is also one of the major causes of traffic accidents. The insurance company will not be liable for compensation for the loss of the insured vehicle caused by drunk driving. 3. Damage caused by restarting the engine after water ingress: The insurance company considers that if the vehicle is driven into deep water, the engine stalls, and the driver forcibly restarts the engine causing damage, it is due to improper operation and is not covered by the insurance. 4. Intentional acts: Refers to the behavior of the insured or the driver deliberately damaging or instructing others to damage the insured vehicle (such as intentionally burning the vehicle or pushing it off a cliff). Any damage to the insured vehicle caused by intentional acts will be rejected for compensation by the insurance company. 5. Illegal activities: Refers to the use of the insured vehicle as a tool for criminal activities, such as smuggling, drug trafficking, or illegal goods trafficking. Any damage to the insured vehicle caused by illegal activities will not be covered by the insurance company.
3
2
Share

How to Turn Off the Auto Start-Stop Function in Lavida?

Here are the steps to deactivate the engine start-stop function in Lavida: 1. Press the one-touch start button without depressing the brake pedal to power on the vehicle; 2. Locate the engine start-stop control button; 3. Press the button marked with an 'A' to disable the function. Additional information: Taking the 2021 Volkswagen Lavida Luxury Edition as an example, it belongs to the compact car category with body dimensions of 4670mm in length, 1806mm in width, 1474mm in height, and a wheelbase of 2688mm. The 2021 Volkswagen Lavida Luxury Edition is equipped with a 1.4L turbocharged engine delivering a maximum horsepower of 150PS and peak power output of 110kW.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.