What car has a ram's head logo?

2 Answers
DeKathryn
07/24/25 8:30am
The car with a ram's head logo is Dodge. The company is headquartered in the United States, and the brand was founded by a pair of brothers born in Michigan, USA. The logo uses the surname of the Dodge brothers, with a ram's head image inside a pentagon. Dodge offers a range of vehicles including sedans, sports cars, MPVs, and SUVs. Taking the Dodge Journey as an example, its dimensions are 4910mm in length, 1878mm in width, and 1751mm in height, with a wheelbase of 2890mm. The extended wheelbase provides passengers with an exceptionally spacious ride experience. The Dodge Journey features a MacPherson strut front suspension and a multi-link independent rear suspension.
Was this review help?
12
2
Share
VonJocelyn
08/11/25 4:03am
I know this well! The ram head emblem refers to Dodge's Ram logo, particularly on their RAM pickup truck series. That ram head badge is quite striking, with two big curved horns that exude a strong sense of power. The first time I saw it was on the highway, and I initially thought it was a modified vehicle. In fact, since the 1990s, Dodge has used the Ram as the primary emblem for their flagship models, especially their heavy-duty pickups like the RAM 1500 and 2500. Later, RAM became an independent sub-brand, but this bold ram head emblem was retained. It's especially common in North America, and those who drive these trucks often embody a tough, rugged image.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

What brand is scorplon tire?

scorpion is a tire series under Pirelli, known as the Scorpion series. The sidewall of Scorpion series tires features a scorpion logo, and it is Pirelli's flagship SUV tire. The advantages of the Scorpion series tires are their ability to adapt to various extreme road conditions, hence the name "Scorpion," and their excellent handling performance. The disadvantage of the Scorpion series tires is that they are relatively noisy. Below is some extended information about Pirelli tires: 1. Scorpion ZERO: Offers off-road performance and high performance, ensuring excellent stability during steering on both dry and wet roads, along with superior handling performance and strong grip during braking. 2. Scorpion ATR: Features outstanding all-terrain and off-road capabilities, with a tread depth of 2mm, resistance to punctures and cuts, and strong grip on rough roads, wet surfaces, and during hill climbs. 3. Scorpion STR: Provides excellent handling performance, with sensitive and accurate steering, and strong resistance to punctures.
6
0
Share

What colors are available for the GAC Trumpchi GS4?

GAC Trumpchi GS4 comes in 7 colors. The color options for GAC Trumpchi GS4 are: Shining Gold, Ivory White, Burgundy Red, Elegant Black, Mocha Brown, Champagne Gold, and Amber Gold. Here is some relevant information about the GAC Trumpchi GS4: 1. Exterior: The GAC Trumpchi GS4 has its own distinctive style, with high recognition whether viewed from the front or rear. The front features a uniquely styled chrome-decorated grille that gives a youthful and fashionable appearance, while the rear design is the highlight of the car's exterior, with clean and stylish lines that strike a perfect balance between ruggedness and smoothness. 2. Interior: The GAC Trumpchi GS4 adopts a very minimalist design style, with materials and craftsmanship that meet the standards expected for this class of vehicles, presenting an overall youthful and fashionable look.
13
3
Share

How to Determine if Wheel Bolts Are Tightened Properly?

Generally, wheel bolts are considered properly tightened when a torque wrench shows a torque value of approximately 100-120 N·m. Wheel bolts should be tightened in a crisscross pattern in three stages to ensure even force distribution and a more secure tire installation. It's important to note that overtightening wheel bolts is not advisable, as it can lead to stretching of the bolt threads or even cracking. For personal safety, it is recommended to develop the following inspection habits: 1. Develop a routine of checking tires and wheel bolts before driving to prevent accidents caused by loose or missing bolts. 2. Cultivate the habit of observing and listening to your vehicle's operating sounds; if any abnormal noises are detected during operation, conduct a thorough inspection immediately.
1
3
Share

How to Remove the Crankshaft Position Sensor on a Mitsubishi Pajero?

Mitsubishi Pajero crankshaft position sensor removal method is as follows: 1. Secure the car battery, disconnect the negative battery ground cable before starting the installation process. 2. Locate the sensor and disconnect the wiring harness from the sensor. Pay attention to the wiring connections, as they will need to be reconnected in the same order once installed. 3. With the wires disconnected, use a socket wrench to pry open the bolts and remove the faulty sensor. The main functions of the crankshaft position sensor are as follows: The crankshaft position sensor controls the signal source for engine ignition timing and confirms the position of the crankshaft. The crankshaft position sensor is used to detect the top dead center signal of the piston, the crankshaft angle signal, and the signal source for measuring engine speed.
13
0
Share

What are the symptoms of a faulty release bearing?

Here are the symptoms of a faulty release bearing: 1. When the release bearing fails, lightly press the clutch pedal after starting the engine. 2. When the free travel is just eliminated, a "rustling" or "squeaking" sound will occur. If the sound disappears when you continue to press the clutch pedal, it is not a release bearing issue. If the sound persists, it is the release bearing making noise. Here are the daily maintenance tips for the release bearing: 1. Avoid the clutch being in a semi-engaged and semi-disengaged state, and reduce the frequency of clutch usage. 2. During regular or scheduled maintenance, remove the release bearing to clean impurities and use the boiling method to soak it in lubricating oil to ensure sufficient lubrication. 3. Pay attention to leveling the clutch release lever to ensure the return spring's elasticity meets the specified requirements. 4. Adjust the free travel to meet the requirements (35--45mm). Prevent the free travel from being too large or too small. 5. Reduce the number of engagements and separations to minimize impact loads. 6. Press lightly, release smoothly, and move your foot away from the clutch pedal to engage and disengage it.
6
1
Share

How to Check Tire Pressure on the Lingpai?

The Lingpai can be equipped with a tire pressure monitoring system to check tire pressure. Here is information about Lingpai tire maintenance: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should neither be too high nor too low; always inflate according to the vehicle's indicated pressure. In summer, try to keep the pressure slightly lower. In winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. This ensures a comfortable and safe drive. 2. Frequently inspect tire wear: Some vehicles may experience uneven tire wear, so regularly check the tires, especially the inner side, for abnormal wear. Pay attention to whether the tread depth is consistent on both sides. 3. Rotate tires on schedule: The front tires, being steering tires, wear out faster. To reduce front tire wear, perform a four-tire rotation every 5,000 km after the first maintenance, preferably using the diagonal rotation method. 4. Perform wheel alignment periodically: If the vehicle pulls to one side or exhibits abnormal steering, promptly align the tires to prevent further issues. Wheel alignment ensures even force distribution across all four tires, avoiding excessive wear. 5. Repair punctures promptly: If a tire is punctured by a nail, even if there's no air leakage, replace it with the spare tire as soon as possible and repair the punctured tire.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.