What car has a logo with three circles?

2 Answers
CarolineLynn
07/29/25 7:43am
The logo with three circles belongs to the Ruimai pickup truck under Jiangxi Isuzu. The three circles symbolize rich meanings and connotations of morality, quality, and taste. In terms of appearance, the Ruimai adopts a relatively rugged design language. The horizontal grille on the front face is decorated with thick chrome trim, and the headlights are also blackened, complemented by daytime running lights below. For the powertrain, the new Ruimai will be equipped with two engines: a 2.5T diesel and a 2.4T gasoline, both meeting the National VI emission standards. The 2.5T diesel engine has a maximum power of 110kW and a maximum torque of 360Nm, paired with a 6-speed manual transmission. The 2.4T gasoline engine delivers a maximum power of 155kW and a maximum torque of 320Nm, matched with a 5-speed manual transmission.
Was this review help?
1
3
Share
AdamFitz
08/12/25 10:59am
That car emblem with three circles is actually the logo of Audi, featuring four interconnected rings, which is quite iconic. I looked it up before - Audi is a German automotive brand specializing in premium vehicles like the popular A4 and Q7 models, with impressive sales figures. The story behind this emblem is quite fascinating; it dates back to 1932, symbolizing the merger of four German automakers: DKW, Horch, Wanderer, and Audi itself. Each ring represents the spirit and heritage of these companies, embodying technological integration and quality. Now under Volkswagen Group, Audi's lineup leans heavily into tech-forward designs, with its lighting systems being particularly renowned for high nighttime visibility. I find this design simple yet effective, instantly memorable without being overly flashy like some other logos, maintaining that refined German engineering aesthetic – perfect for owners who appreciate understated sophistication.
Was this review help?
12
0
Share
Expand All
More Forum Discussions

What is the method for replacing the air conditioning filter in a Volvo XC60?

Volvo XC60 air conditioning filter replacement method is as follows: 1. Remove the clips located at the front of the passenger side in the engine compartment, then take out the sound insulation cotton; 2. Remove the filter. After taking out the sound insulation cotton, reach in to remove the cover plate, then reach in again to take out the air conditioning filter. Note that there is an arrow indicator on the outer side of the filter, and it should be installed in the correct direction to avoid reverse installation. The air conditioning filter is a filter installed in the car's air conditioning system, which can absorb dust particles, reduce respiratory discomfort, minimize irritation for allergy sufferers, and protect the air conditioning cooling system. The Volvo XC60 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, with a maximum power of 140 kW and a maximum torque of 300 Nm, using front-wheel drive.
8
0
Share

What is the reason for the warm air not being hot in external circulation but hot in internal circulation?

The reason for the warm air not being hot in external circulation but hot in internal circulation is: the external environment temperature is low, and when in external circulation, the cabin is connected to the outside, allowing cold air to enter. When internal circulation is turned on, it means external circulation is turned off, isolating the cabin from the outside, so no cold air enters, hence the external circulation is not hot while the internal circulation is. The methods for using air circulation in cars are: 1. Use internal circulation during traffic jams and external circulation during high-speed driving; 2. The use of internal and external circulation should be combined with air conditioning and heating; 3. Use external circulation during long-distance driving to allow fresh outside air to enter the car, avoiding low oxygen levels inside the car.
14
2
Share

How to kick-start a scooter when the battery is dead?

The method to kick-start a scooter when the battery is dead is: 1. Turn the scooter's key switch to the off position, hold the brake lever, and apply a little throttle; 2. Step on the kick-start lever to rotate the engine. Once you feel compression resistance, release the kick-start lever back to its highest point and then step down again. The classification of throttle pedals is: 1. Hanging-type throttle pedal; 2. Floor-mounted throttle pedal. Pressing the throttle pedal does not control the fuel injection amount but regulates the intake air volume through the throttle opening. The vehicle's computer adjusts the fuel injection amount based on the intake air volume. The throttle connects to the air filter at the top and the engine block at the bottom, known as the throat of the car engine.
4
5
Share

How to reset the maintenance light on Changan CS75 Plus?

The method to reset the maintenance light on Changan CS75 is as follows: 1. Turn the car key to the ON position (full vehicle power-on state), which means turning the key twice or pressing the start button twice for keyless start, then press the selection button on the left side of the steering wheel as indicated in the red-marked area in the diagram; 2. Press and hold the reset button for about 5 seconds (do not release the reset button). Turn off the vehicle power while still holding the reset button, then turn on the full vehicle power again. You will see that the maintenance reminder has been cleared. Taking the 2021 Changan CS75 as an example, it is a compact SUV with body dimensions of: length 4650mm, width 1850mm, height 1715mm, a wheelbase of 2700mm, a fuel tank capacity of 58 liters, and a curb weight of 1600kg.
7
3
Share

Is it normal for a CVT to jerk slightly at start-up and then run smoothly?

It is normal for a CVT to jerk slightly at start-up and then run smoothly. A CVT refers to a continuously variable transmission, which is a type of automatic transmission in vehicles. It can continuously obtain any transmission ratio within the speed range, achieving optimal matching between the drivetrain and engine conditions through continuous variable transmission. Transmissions are categorized into AT (automatic transmission), CVT (continuously variable transmission), AMT (automated manual transmission), and DCT (dual-clutch transmission). Transmission working principles: 1. Manual transmissions consist of gears and shafts, achieving speed and torque changes through different gear combinations. 2. Automatic transmissions are composed of torque converters, planetary gears, and hydraulic control systems, achieving speed and torque changes through hydraulic transmission and gear combinations.
15
1
Share

How to operate the automatic parking of Audi A4L?

Automatic parking operation method: Press the automatic parking button, the indicator light will turn on, and the instrument display will show to drive forward. Continue driving until the car is approximately aligned with the front car or even further forward, until the instrument display shows R, then stop. At this point, shift into D gear, lightly press the brake to control the speed, and the car's computer system will take over the steering wheel and complete the parking. The following is an introduction to automatic parking: 1. Automatic parking means that after the driver finds an ideal parking spot, they only need to gently press the button, sit back, and relax, and everything else will be completed automatically. 2. Automatic parking can only be activated when parallel parking and the parking space is at least 1.5M longer than the car. 3. The automatic parking system is assisted by 12 radars, with 4 on each side of the car body responsible for detecting parking spaces, and the other radars assisting in parking.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.