What car has a logo with four vertical bars?

2 Answers
LolaLee
07/24/25 3:54am
There is no car with a logo featuring four vertical bars, only one with five vertical bars: WM Motor. Here is an introduction to WM Motor: 1. WM Motor is a Chinese independently produced pure electric vehicle brand. Currently, WM Motor has only released one pure electric vehicle, positioned as an intelligent pure electric SUV. This car is named the WM EX5, which is also the first mass-produced vehicle from WM Motor; 2. The WM EX5 features front-wheel drive, with a front suspension system consisting of a MacPherson independent suspension with a stabilizer bar, and a rear suspension system with a variable cross-section torsion beam axle; 3. The front face of the WM EX5 adopts the commonly used closed grille design for electric vehicles. The charging cover is equipped with the WM Motor logo, which can display battery information, giving it a certain technological feel.
Was this review help?
2
1
Share
CharlotteDella
08/10/25 11:30pm
A car emblem with four vertical bars? That's most likely the logo of Audi. I often see it around the streets—the emblem consists of four silver circles connected together, which might look like vertical bars at first glance, but it's actually a ring design. Audi is a well-established German luxury car brand, part of the Volkswagen Group. The origin of the emblem dates back to 1932 when four car companies—Audi, Horch, DKW, and Wanderer—merged, symbolizing the spirit of alliance. Nowadays, Audi models like the A4 sedan and Q7 SUV are quite common, offering a comfortable driving experience with strong technological features. Some people might misidentify the logo at first, but it's easy to recognize once you remember the details. I recommend checking the front grille or rear of the vehicle to confirm, so as not to confuse it with other brands. In short, the Audi emblem is classic and minimalist, suitable for both family and business use, and it's also hassle-free to maintain.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What are the consequences of using 92-octane gasoline in a BMW X3?

According to the official vehicle manual recommendation, the BMW X3 should use 95-octane gasoline. In addition to checking the appropriate gasoline grade in the vehicle manual, the BMW X3 can also find this information on the fuel tank cap, which will be clearly marked. Typically, the gasoline grade can also be determined based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92-octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95-octane gasoline. However, with the application of new technologies, the compression ratio alone cannot determine the appropriate gasoline grade. High compression ratios can also be adjusted to use lower-grade gasoline. This is because, besides the compression ratio, other factors such as ignition timing, turbocharging technology, and Atkinson cycle technology also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92-octane gasoline contains 92% isooctane and 8% n-heptane, while 95-octane gasoline contains 95% isooctane and 5% n-heptane. If the BMW X3 occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, long-term use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower-grade gasoline, using higher-grade gasoline will not cause damage, but the increase in octane number will alter the fuel's ignition point, leading to delayed combustion in the engine. This means the engine's power output and thermal efficiency will decrease, resulting in poorer performance as experienced by the driver. For vehicles recommended to use higher-grade gasoline, using lower-grade gasoline can cause engine knocking. This is because the significantly lower octane number reduces the gasoline's ignition point, causing premature ignition during the compression stroke. If the fuel ignites before the spark plug fires, resistance will occur during the upward stroke. This resistance makes the engine run very unstably. If the knocking is imperceptible, it only increases noise without obvious engine damage. However, noticeable knocking indicates severe engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in severe cases, cylinder scoring.
2
0
Share

Will the exam fee be refunded if the subject one test appointment is canceled?

Subject one test appointment cancellation does not result in a refund of the exam fee. Related information: 1. Notes: If you need to cancel the subject one test, you must do so at least one day in advance. Failure to cancel in time will result in the inability to cancel, and you will be directly marked as failing the test. 2. Additional information: The full name of the driver's license is the motor vehicle driver's license, also known as the "driver's license," which is the certificate required by law for motor vehicle drivers. In China, the definition of a driver's license is: A motor vehicle driver's license is a legal document issued by the management department to individuals who have legally been allowed to learn to drive motor vehicles, have studied and mastered traffic regulations and driving skills, and have passed the required tests, permitting them to drive certain types of motor vehicles.
1
0
Share

Is it a problem if a C1 driver's license has only one point left?

A C1 driver's license with only one point left does not affect its use. As long as no further points are deducted within the scoring cycle, there will be no impact. However, if additional points are deducted within the cycle, it may result in a full score, leading to the temporary suspension of the driver's license. The C1 driver's license is one of the codes for motor vehicle driver's licenses. The permitted driving scope of a C1 license includes small and micro passenger vehicles, as well as light and micro cargo vehicles; light, small, and micro special operation vehicles; and small passenger vehicles with seating capacity of 9 or fewer people. C1 license examination: The examination consists of four subjects: traffic regulations and related knowledge, field driving, road driving, and safe and civilized driving common sense. The passing standards for the C1 examination are as follows: Traffic regulations and related knowledge (Subject 1) — written test, scored out of 100, with 90 or above required to pass. Field driving (Subject 2) — on-site, actual vehicle operation. The minimum passing score is 80; scores below 80 are failing. Road driving (Subject 3) — on the road or simulated field, actual vehicle operation. Scored out of 100, with 90 or above required to pass. Safe and civilized driving common sense — written test, featuring questions in the form of case studies, images, animations, etc., including true/false, single-choice, and multiple-choice questions. There are 50 questions in total, scored out of 100, with 90 or above required to pass.
16
1
Share

How often should a private car have its refrigerant recharged?

Private cars generally need to have their refrigerant recharged every five to eight years. Here are the methods to determine whether a car's air conditioning system needs a refrigerant recharge: 1. Continuous bubbles in the sight glass: When the air conditioning is running normally and continuously, if there are continuous bubbles in the sight glass, it indicates insufficient refrigerant and a need for recharge. 2. No bubbles in the sight glass: When the air conditioning is running normally and continuously, if there are no bubbles in the sight glass, and no temporary bubbles appear when the air conditioning stops, it indicates an excessive amount of refrigerant and a need for discharge. 3. Temporary bubbles appear when the air conditioning stops: When the air conditioning is running normally and continuously, if there are no bubbles in the sight glass, but temporary bubbles appear when the air conditioning stops, it indicates the refrigerant level is normal.
5
1
Share

What is the wading depth of the BMW 740?

The maximum wading depth of the BMW 740 is 250-300mm. The wading depth of the BMW 740 is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the BMW 740 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in the water, which could cause severe damage if water enters the engine. Assess the underwater road conditions based on the passage of vehicles ahead and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
20
5
Share

Is the driver's license refund processed at the driving school or the vehicle management office?

The driver's license refund is processed at the driving school. Here are the key points to note: 1. Refund items: In principle, as long as a contract is signed at the time of enrollment, the training fee can be handled according to the contract, and any unused fees can be refunded. If exam fees, administrative fees, and training fees have been incurred, they will be deducted from the paid amount. The remaining balance will be refunded to the student, who can then apply to another training school. 2. Keep receipts: The vehicle management office also specifically reminds students to keep the original invoice and receipts from the time of enrollment, as losing them may complicate the refund process.
9
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.