What car has a logo with an S?

What to Do If ID Card Is Lost Before the Subject 1 Exam?

If you lose your ID card before the Subject 1 exam, you can apply for a temporary ID card in advance. Without an ID card on the exam day, you cannot take the test. To obtain a temporary ID card, you can apply at the local police station of your permanent residence. The temporary ID card has the same validity as a formal ID card. The admission ticket and other required documents are handled by the driving school, which will distribute them during the exam. Electronic ID cards cannot be used for the exam. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject 1 exam can be taken twice. If you fail the first attempt, you can retake it for free. If you fail the second attempt, the Subject 1 exam will be terminated, and you can only reschedule the exam after ten days. The exam is computer-based and lasts 45 minutes. The Subject 1 exam covers the following topics: regulations on driver's licenses and motor vehicle management; road traffic conditions and regulations; traffic safety violations and penalties; regulations on road traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Exam precautions for Subject 1: Pay attention to your attire—no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen. Before entering the exam room, store your personal belongings in a locker. After entering, verify your identity at the assigned station and begin the exam. Ensure the camera is aligned with you and follow exam discipline. If you fail the first attempt, you can retake it on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail it, the exam will be terminated, and you must reschedule. For Subject 2 and Subject 3, there are only five exam attempts. Subject 2 and Subject 3 exams can be rescheduled after ten days. If you fail the Subject 3 safe driving knowledge test, your passing score for the road driving skills test remains valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the exam on road traffic safety laws, regulations, and related knowledge. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security Order No. 123) does not include "Subject 4." The exam lasts 45 minutes.

2

0

Share

What Causes the CT6 Engine Warning Light to Illuminate?

Sensor malfunctions, vehicle maintenance issues, fuel/oil quality problems, poor combustion of the air-fuel mixture, engine intake issues, turbocharging problems, exhaust system faults, and anti-theft system failures are the primary reasons for the engine warning light to illuminate. Additionally, during vehicle startup, the system performs a self-diagnostic check on the engine. Normally, the warning light should turn off after this check. If it remains lit for an extended period, promptly visit a service center for professional diagnosis and repair to eliminate potential hazards. Below is a detailed explanation of each potential fault: Sensor Issues: Sensors such as coolant temperature, crankshaft position, air flow, intake air temperature, and oxygen sensors may malfunction due to damage, poor contact, or signal interruption. This prevents the ECU from accurately obtaining engine data, triggering the warning light. Seek professional inspection immediately to address such issues. Maintenance Issues: Poor engine maintenance is the most common cause of the warning light. Vehicles require periodic maintenance; neglecting this, combined with poor driving habits, increases engine stress, eventually triggering the warning light. Fuel/Oil Quality: This refers to both fuel and engine oil. Vehicles require specific fuel grades and oil types (semi-synthetic or full-synthetic). Using incorrect specifications long-term can cause engine wear, leading to the warning light. Always use the manufacturer-recommended fuel and oil. Poor Combustion: Faulty spark plugs, ignition coils, fuel pumps, or clogged fuel lines can disrupt the air-fuel mixture combustion, causing carbon buildup or knocking. The oxygen sensor detects these issues, prompting the ECU to illuminate the warning light. Intake Issues: The air filter plays a critical role in engine combustion. A dirty or clogged filter restricts airflow, potentially leading to blockages and triggering the warning light if left unaddressed. Turbocharging Issues: Problems with the intake boost system or turbocharger (e.g., leaks, excessive oil consumption, power loss, unusual noises, or colored exhaust smoke) can activate the warning light. Exhaust System Issues: Faults in the rear oxygen sensor, catalytic converter, or exhaust camshaft/bearings—often caused by leaded fuel, improper additives, physical damage, or fuel system failures—may trigger the warning light. Anti-Theft System: A malfunctioning or mismatched anti-theft system can prevent the engine from operating normally, accompanied by the warning light. The engine warning light may appear in two forms: a yellow light (indicating a non-critical issue where driving can continue with limited functionality) or a red light (requiring immediate shutdown and professional inspection). Solutions for an illuminated engine warning light: 1. If the vehicle won’t start (possible fuel pump or ignition failure), call for assistance. 2. If drivable but experiencing severe shaking or power loss, pull over safely and request roadside aid. 3. If no abnormal symptoms occur, proceed cautiously at low speed to a repair shop for diagnosis.

11

0

Share

How to turn on the cold air conditioning in Chery Arrizo 5?

Press the A/C button on the air conditioning panel to activate the automatic air conditioning system, then turn the temperature knob to the blue area to blow cold air. Press the AUTO button directly, and in automatic operation mode, the system will maintain a stable temperature inside the car based on the external thermometer.

16

4

Share

How to Use Cruise Control in an Automatic Transmission Car?

The first larger button on the left is the cruise control activation button, and the one next to it is the cancel cruise control button; You can press the cruise control activation button upwards to turn it on, and press it downwards to turn it off; An identical icon will appear on the dashboard, indicating that the cruise control has been activated; When the car reaches your desired cruising speed, you can press the set button downwards; You can press this button upwards or downwards.

18

0

Share

How to Connect Bluetooth for Music Playback in Nissan Sylphy?

First, establish a pairing relationship. Turn on the Bluetooth functions of both your phone and the navigation device, and set the device to 'visible to everyone'. Search for Bluetooth devices on your phone, select the connection after finding it, enter the password, and the connection will be successful once the pairing is completed. Finally, after the navigation and phone Bluetooth are successfully connected, enter the Bluetooth interface, click on music, and simultaneously open the music player on your phone.

9

0

Share

How to Push an Automatic Transmission Car?

To push an automatic transmission car when the engine is off, the gear must be placed in the N (Neutral) position. Pushing the car in any other gear is strictly prohibited. First, attempt to shift the vehicle's gear to N. If the vehicle can be started, you may start it first, shift the transmission to N, and then turn off the engine. After the engine is off, mechanical gear levers usually have an unlocking mechanism that can be used to unlock and then shift to N.

10

2

Share

What car has a logo with an S?

What to Do If ID Card Is Lost Before the Subject 1 Exam?

What Causes the CT6 Engine Warning Light to Illuminate?

How to turn on the cold air conditioning in Chery Arrizo 5?

How to Use Cruise Control in an Automatic Transmission Car?

How to Connect Bluetooth for Music Playback in Nissan Sylphy?

How to Push an Automatic Transmission Car?

Is Compensation Required if a Car Horn Scares Someone?

What are the requirements for joining a new energy charging pile franchise?

How many kilometers can an XRV travel on a full tank of fuel?

How Long Does It Usually Take to Practice Automatic Transmission Subject 2?