What car has a logo with a snake and a cross?

How to Apply Crystal Coating?

Crystal coating method steps: 1. First, park the car in a wind-sheltered environment, wet the vehicle's paint surface with water, apply foam, and use a wool glove dipped in foam to wash off the dirt on the paint surface. 2. Use clay bar with QD liquid to further clean the paint surface. The clay bar can adsorb fine dust particles on the paint surface, making it smooth. After using the clay bar, thoroughly rinse and dry the car. If possible, perform a full-body polishing before applying the crystal coating for better results. 3. After completing the above steps, you can start applying the crystal coating. Each crystal coating product comes with a dedicated sponge and a small cloth. Wrap the cloth around the sponge, then drip a few drops of the crystal coating liquid onto the cloth-wrapped sponge. Apply it evenly in straight lines or a crisscross pattern on the paint surface, ensuring no areas are missed.

5

0

Share

How to Determine the Front Position of the Car?

You can determine the front position of the car by observing the bumper, the rear tires of the car in front, or the relative ground lines. Here are the methods for confirming the front position of the car: 1. Observe the bumper: When driving on the road, if you see the upper edge of the front car's bumper from the lower edge of the windshield, the distance between the two cars is approximately 1.5 meters. 2. Observe the rear tires of the car in front: When driving on the road, if you see the lower edge of the front car's rear tires from the lower edge of the windshield, the distance between the two cars is approximately 3 meters. 3. Observe the relative ground lines: While driving, the horizontal line on the ground seen through the angle between the left rearview mirror and the triangular window indicates the position of your car's front.

12

3

Share

Which region's license plate starts with the character 'Hong'?

There are no license plates in China that start with the character 'Hong', as no province or municipality in China uses 'Hong' as its abbreviation. 1. The vehicle registration authority code consists of two characters, one Chinese character and one English letter. 2. The Chinese character represents the abbreviation of the province, autonomous region, or municipality, while the English letter denotes the code of the vehicle management office. Typically, the division is based on the provincial vehicle management office and the conditions of each prefecture-level city, with 'A' representing the provincial capital, 'B' the second-largest city, and so on. Here is an introduction to the meanings represented by different license plate colors: 1. White license plates represent special departments such as public security, procuratorate, judiciary, and armed police; 2. Blue license plates represent ordinary small cars, including small-tonnage trucks; 3. Yellow license plates represent large vehicles such as trucks and trailers, as well as coach cars, engineering vehicles, motorcycles, or cars longer than 6 meters; 4. Green license plates represent new energy vehicles.

6

3

Share

What are the advantages and disadvantages of run-flat tires?

Advantages of run-flat tires: 1. Enhanced safety: The specially thickened sidewalls of run-flat tires allow them to continue supporting the vehicle even after a complete loss of air pressure, enabling safe driving at speeds of up to 80 km/h for approximately 80 km. This significantly improves the driving safety of the vehicle. 2. Reduced vehicle weight: If a vehicle is equipped with run-flat tires, the spare tire typically stored in the trunk can often be omitted. Without the spare tire, the overall vehicle weight is reduced, leading to improved fuel economy. Additionally, the absence of a spare tire allows automakers to better optimize the weight distribution between the front and rear of the vehicle. Disadvantages of run-flat tires: 1. Higher noise and lower comfort: Compared to regular tires, run-flat tires are notably stiffer due to their specially thickened sidewall structure. The stiff sidewalls transmit road vibrations directly to the vehicle's occupants and offer relatively weaker noise suppression. 2. Higher cost: The materials used in the thickened sidewalls of run-flat tires are more substantial than those in regular tires. Additionally, the inherent structural constraints of run-flat tires require efforts to maintain a certain level of driving comfort, making it difficult to control costs effectively. 3. Difficult to repair: The specially thickened sidewalls of run-flat tires are much stiffer than those of regular tires. This stiffness makes the process of removing and repairing run-flat tires particularly challenging.

7

2

Share

Can I add 95 gasoline when 92 is not used up?

You can add 95 gasoline when 92 is not used up. It does not have much adverse effect on the car and the engine itself, but due to the insufficiently high design compression ratio, the characteristics of 95 gasoline cannot be fully utilized, resulting in "delayed combustion" and increased fuel consumption. Here is a related introduction to the differences between 92 and 95 gasoline: 1. The content of n-heptane and isooctane is different. The two most basic components of gasoline are n-heptane and isooctane. Isooctane has strong anti-knock properties and is the sedative of gasoline, while n-heptane has strong combustibility and is the stimulant of gasoline. These two interact, and the higher the isooctane content, the stronger the anti-knock performance of the gasoline. 92 gasoline is gasoline with an octane rating of 92, suitable for mid-range cars (with relatively low compression ratios), while 95 gasoline has an octane rating of 95 and 3 heptane. 2. The higher the label, the stronger the anti-knock performance. The grade of gasoline is an indicator of anti-knock, which is basically unrelated to cleanliness, power, and combustion value. The higher the gasoline label, the stronger the ability to resist engine knocking. The biggest difference between 92 and 95 is that 95 is more resistant to knocking than 92.

7

1

Share

Do I need to take an exam to upgrade from a C1 to a B2 driver's license?

To upgrade from a C1 to a B2 driver's license, you must retake all exams starting from Subject 1. The new license will only be issued after passing Subject 4. The content of Subject 1, Subject 3, and Subject 4 remains unchanged, covering theoretical exams, road tests, and safe driving practices. Subject 2 includes the following tests: pole parking, slope parking and starting, parallel parking, single-plank bridge crossing, curve driving, right-angle turning, narrow gate crossing, continuous obstacle crossing, bumpy road driving, narrow road U-turns, as well as simulations for highways, continuous sharp turns on mountain roads, tunnels, rain (fog) conditions, slippery roads, and emergency handling. Here are the relevant details: 1. Initial application requirements for a B2 driver's license: Applicants must be at least 20 years old, with a height of no less than 155 cm and uncorrected or corrected vision of at least 5.0. 2. Requirements for upgrading from C1 to B2: Hold a C1 license for three or more years, with no record of accumulating 12 penalty points in the current scoring cycle or the three consecutive previous cycles. Applications can only be made in the applicant's registered residence location.

9

1

Share

What car has a logo with a snake and a cross?

How to Apply Crystal Coating?

How to Determine the Front Position of the Car?

Which region's license plate starts with the character 'Hong'?

What are the advantages and disadvantages of run-flat tires?

Can I add 95 gasoline when 92 is not used up?

Do I need to take an exam to upgrade from a C1 to a B2 driver's license?

How long after passing the driving test subject three can you take subject four?

What is the discount for Agricultural Commercial Bank ETC?

What documents are needed to buy a car in another city?

How Soon Can a New Driver Go on the Highway?