What car has a goat head logo?

What is the reason for the electric mirror not returning to position?

The reasons for the electric mirror not returning to position: 1. Gear stuck: If the automatic folding mirror does not fold properly, it may be due to the gear being stuck, which requires removing the mirror for inspection. 2. Motor failure: The motor inside the mirror may have malfunctioned, requiring replacement of a new mirror motor. 3. Fuse damage: When activating the mirror folding function, a damaged fuse can also cause this issue. Below is additional information about the role of mirror heating: 1. After rain: It keeps the mirror clear when fogged up after rain. 2. Second pair of eyes: It allows the driver to indirectly see the rear and surrounding conditions clearly, acting as a second pair of eyes. 3. Safety: It expands the driver's field of vision, enhancing driving safety.

19

5

Share

What are the differences between BYD Song Pro Elite and Luxury versions?

The differences between BYD Song Pro Elite and Luxury versions lie in their configurations. The Luxury version adds front side airbags, tire pressure display, lane departure warning, road traffic sign recognition, active braking, front parking radar, 360-degree surround view, full-speed adaptive cruise system, and a 10.1-inch central control screen compared to the Elite version. Below are the similarities between BYD Song Pro Elite and Luxury versions: 1. Vehicle configuration: Both use a 1.5-liter turbocharged engine with a maximum power of 118kw, maximum torque of 245 Nm, maximum torque speed range of 1600 to 4000 rpm, and maximum power speed of 5200 rpm. They feature direct fuel injection technology and use aluminum alloy cylinder heads and blocks. 2. Body dimensions: The wheelbase is 2712 mm, and the length, width, and height are 4650 mm, 1860 mm, and 1700 mm respectively.

5

4

Share

What Causes Battery Drain When Using Car Air Conditioning?

Battery drain when using car air conditioning is primarily due to insufficient power generation from the vehicle's alternator. Here are the key details: 1. Causes of battery drain: The electromagnetic clutch of the compressor, evaporator fan motor, and condenser fan motor all require power to operate, consuming significantly more electricity than when the AC is off. When the alternator isn't functioning properly and can't provide sufficient power, battery drain occurs. 2. Preventive measures: Always try to keep the battery fully charged. Note that batteries typically hold less charge in winter than in summer. Regularly check if the vehicle's alternator is working properly. It's advisable to have a bench charger ready when necessary. If battery drain occurs frequently, promptly visit a battery repair shop for servicing.

4

Share

How to Solve Electric Vehicle BMS Faults?

bms fault solutions: 1. Observation method: When communication interruption or control abnormality occurs in the system, observe whether each module of the system has an alarm and whether there is an alarm icon on the display screen, then troubleshoot the phenomenon one by one. 2. Fault reproduction method: The faults that occur under different conditions of the vehicle are different. When conditions permit, try to reproduce the fault under the same conditions to confirm the problem point. 3. Elimination method: When the system experiences similar interference phenomena, each component in the system should be removed one by one to determine which part is affecting the system. 4. Replacement method: When a module exhibits abnormalities in temperature, voltage, control, etc., swap the positions of modules with the same number of strings to diagnose whether it is a module problem or a wiring harness problem. 5. Environment inspection method: When the system fails, such as the system cannot display, do not rush to consider in-depth, because some details are often overlooked. First, check the obvious things: whether the power is connected, whether the switch is turned on, whether all the wiring is connected, etc. Perhaps the root of the problem lies therein.

9

1

Share

How to Handle a Flooded Car to Make It Start?

When a car stalls in water, the main reason is usually water entering the exhaust pipe, and in some cases, there might also be electrical circuit damage. Once the car stalls, it is crucial not to attempt to restart it immediately. Restarting could lead to water entering the intake tract, potentially damaging the valves, and in severe cases, it might even cause the engine to be irreparably damaged. Instead, the vehicle should be towed to a 4S shop immediately for professional handling. Additional information is as follows: 1. Vehicle wading: Vehicle wading, as the name suggests, refers to driving through low-lying areas or roads with accumulated water. This typically occurs during rainy weather when inadequate drainage leads to water accumulation in low-lying road sections. 2. Vehicle wading insurance: According to insurance terms, wading insurance mainly covers situations where, during heavy rain or floods, the vehicle's exhaust pipe or intake pipe is submerged, and the driver attempts to restart the vehicle or uses inertia to start it. It also covers damages caused by starting the vehicle without necessary post-flooding procedures. In these two scenarios, wading insurance can provide compensation for the damages.

18

0

Share

What is the reason why the one-line communication instrument does not display the speed?

Introduction to the reasons why the one-line communication instrument does not display the speed: motor failure, controller failure, throttle failure, etc. "One-line communication" (requires both the controller and the LCD instrument to support it) is a feature that displays faults on the LCD screen when an electric vehicle encounters issues. The one-line communication is a device designed for emergency fault repair in electric vehicles. When a fault occurs, pressing this key can temporarily fix the issue, allowing the vehicle to be ridden under normal circumstances. However, it is still necessary to visit a repair shop to address the root cause of the problem. Below is some extended information about one-line communication: 1. The controller adopts a dual closed-loop control system (brushless: speed/current dual closed-loop, brushed: voltage/current dual closed-loop). Due to the presence of the current loop, it can limit the current, ensuring that the maximum current output value of the electric vehicle under various normal operating conditions does not exceed the set current limit value, achieving automatic current limiting. Under any operating condition, the battery will not discharge current exceeding the set value, ensuring battery safety. 2. Additionally, due to the coordinated effect of the dual closed-loop, the motor can achieve the most ideal starting and acceleration processes, effectively utilizing the battery current, thereby increasing the driving range of the electric bicycle.

6

0

Share

What car has a goat head logo?

What is the reason for the electric mirror not returning to position?

What are the differences between BYD Song Pro Elite and Luxury versions?

What Causes Battery Drain When Using Car Air Conditioning?

How to Solve Electric Vehicle BMS Faults?

How to Handle a Flooded Car to Make It Start?

What is the reason why the one-line communication instrument does not display the speed?

Will electric cars short circuit when driving through water?

How to Read the Fuel Gauge in a Cadillac?

What Are the Reasons for a Car Not Cooling?

What are the causes of bearing seizure?