What car has a fork-like logo?

What are the reasons for the oil pump failing to draw oil?

Oil pump failing to draw oil may be due to low oil level, excessively low oil temperature, insufficient suction force of the oil pump, or blockage in the suction pipe. Below are the reasons for the oil pump failing to draw oil: Low oil level: The oil level is too low, exposing the suction pipe. If the oil level is too low, the suction pipe of the oil pump is exposed above the oil surface, making it impossible to draw oil even with strong suction. It could also be because the position of the suction pipe is too high, leading to the oil pump's inability to draw oil. It is necessary to add oil immediately and avoid continuing to drive. Turn off the vehicle and park it on a flat surface. Wait for about ten minutes, then open the oil filler port and add oil of the same type as the original until the oil level reaches the middle position between the upper and lower marks on the dipstick. Stop adding oil at this point. Excessively low oil temperature: Excessively low oil temperature causes the oil's viscosity to decrease. Under normal temperature, oil is in a semi-solid state. Once the oil temperature drops, the oil tends to become more solid. This creates significant resistance during the oil pump's operation, which is why the oil pump cannot draw oil. Inspect related components promptly and resolve the issue as soon as possible to prevent minor problems from escalating into major faults. Insufficient suction force of the oil pump: The suction force of the oil pump is not strong enough. The oil pump relies on strong suction to draw oil from outside the suction pipe. If the suction force is insufficient, it becomes difficult to draw oil from a low position to a higher one. It is recommended to check the voltage of the fuel pump. For imported or joint-venture compact cars, the oil pump cannot be repaired and must be replaced with a new one. Blockage in the suction pipe: The suction pipe is blocked. A clear suction pipe is essential for the metering diaphragm pump to draw oil. If the suction pipe is obstructed by foreign objects, the oil pump cannot draw oil. Inspect the suction pipe and remove any foreign objects.

11

0

Share

How long is the validity period of a small car's vehicle license?

The vehicle license is valid indefinitely, but it still requires annual inspection. The inspection validity period is noted on the supplementary page, which essentially indicates the deadline for the annual inspection. Therefore, the validity period of the vehicle license is also linked to the annual inspection. Vehicle license processing locations: Embassies/consulates and foreign-licensed vehicles should apply at the vehicle management office. Other vehicles should apply at the sub-office of the vehicle management office corresponding to the residential address stated in the vehicle owner's identity document. For vehicles with a registered address in suburban districts/counties (specifically Jing B licensed motorcycles, tricycles, low-speed trucks, and wheeled self-propelled machinery), applications should be made at the local district/county vehicle management station. Required documents for application: Application Form for Replacement of Vehicle License Plates/Certificates, identity documents of the vehicle owner and agent, the original license plate (if one plate is illegible or lost), and for replacement of the vehicle license, a standard photo of the vehicle is also required.

8

1

Share

What are the license plate registration requirements in Changzhou?

License plate registration requirements in Changzhou: For locals: A local household registration is sufficient for registration. For non-locals: A residence permit is required, and the residence permit must be valid for at least 6 months. After April 30th, non-local vehicles must meet the National 5 emission standard to be registered in Changzhou. For local vehicles transferring to another region, the emission standard acceptable by the destination must be considered. Documents required for registration: ID card, vehicle certificate of conformity, vehicle parameter sheet, vehicle invoice (second and fourth copies), vehicle purchase tax, car insurance policy, purchase invoice, vehicle qualification certificate, ID card or organization code certificate and copies of the invoice issuer, compulsory insurance policy, tax payment certificate, and temporary residence permit for non-locals. Registration process: After preparing the documents, go to the vehicle management office to submit the materials, sign as the owner, undergo an external inspection and confirmation by the traffic police, select a license plate number, receive the receipt, install and take photos of the fixed license plate, and collect the vehicle license and registration certificate.

14

5

Share

Does modifying the front grille require filing with the vehicle management office?

Modifying the front grille requires filing with the vehicle management office. During the annual inspection of motor vehicles, it is necessary to check the appearance. The CNG (Compressed Natural Gas) system is part of the vehicle's exterior, so after modifying the front grille, it must be registered with the vehicle management office, and the photo on the driving license should be replaced. Requirements for modifying the front grille: Modifying the front grille with styles already filed by the manufacturer: Many vehicles offer optional appearance sport kits or some exterior parts when purchasing, and these exterior parts have already been filed with the vehicle management office by the manufacturer; The modified front grille should not change the length and width of the vehicle: According to the latest "Motor Vehicle Inspection Work Regulations," modifying the front grille has been included in the legal scope, but it is important to ensure that the modification does not alter the vehicle's length and width. Main functions of the car front grille: The main functions of the car front grille are for the air intake and ventilation of the radiator, engine, air conditioning, etc., to prevent damage to internal components from foreign objects during driving, as well as for aesthetic and personalization purposes.

15

2

Share

How is the ETC device powered?

There are two types of ETC devices: one is solar-powered, and this type of ETC does not require charging as it uses its own built-in power source. The ETC electronic tag consumes power, but it does not need regular charging during normal use because there is a solar panel on the back of the battery that can charge itself. During installation, it is necessary to avoid the black areas on the windshield. The other type requires wired charging, and if it is not used frequently, it is recommended to charge it once every two to three months. ETC stands for Electronic-Toll-Collection, which means electronic toll collection system. To apply for ETC, you need to provide the original and photocopies of the vehicle owner's valid ID card and driving license. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the driving license should include the page with the most recent annual inspection stamp. Additionally, a bank card for deducting highway tolls is needed. Applicants must be between 18 and 60 years old and own the vehicle. For company vehicles, the required documents are: A letter of introduction from the vehicle owner (with company seal); photocopy of the organization code certificate or business license (with company seal); original ID card of the agent; original driving license of the vehicle; the vehicle that needs ETC. Benefits of installing ETC: Time-saving: eliminates the hassle of waiting in line; Green and eco-friendly: reduces noise and exhaust emissions as vehicles pass through toll stations without stopping; Cost-saving: reduces wear and tear and fuel consumption by minimizing vehicle starts and stops, and users can enjoy toll discounts; Efficiency: ETC lanes can theoretically increase passing efficiency by 2-3 times, making traditional ETC faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: many car models have windshields with a large tilt angle, which reduces the driver's field of vision. If this is not considered during ETC installation, it may increase the driver's blind spots. Installing it behind the rearview mirror on the right side can avoid obstructing the view. Do not interfere with charging: the ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back for self-charging. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: the button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. When using ETC, note the following: the ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters to avoid automatic toll payment for the vehicle in front. The ETC lane recognition speed is 20 km/h; driving too fast may result in failure to read the vehicle's device information, leading to toll deduction failure. If a debit card is bound to ETC, insufficient balance may also cause toll deduction failure.

8

4

Share

What does OBD mean in China V vehicles?

OBD in China V vehicles refers to the On-Board Diagnostics system. OBD monitors the engine's operating conditions to check if the vehicle's exhaust emissions exceed standards, and it will issue an alert immediately if they do. The function of the On-Board Diagnostics system is to automatically monitor the engine's operating status and diagnose the working conditions of other vehicle components. When a fault occurs in any system of the vehicle, the fault indicator light will trigger an alert. The OBD device can simultaneously monitor multiple systems and components in the vehicle, including the engine, catalytic converter, particulate filter, oxygen sensor, emission control system, and fuel system.

15

2

Share

What car has a fork-like logo?

What are the reasons for the oil pump failing to draw oil?

How long is the validity period of a small car's vehicle license?

What are the license plate registration requirements in Changzhou?

Does modifying the front grille require filing with the vehicle management office?

How is the ETC device powered?

What does OBD mean in China V vehicles?

Do I Need to Downshift When Waiting at a Red Light in a Manual Transmission Car?

Which Volkswagen models come with a clock?

What does it mean when the vehicle inspection validity period is until September?

What is an emergency lane?