What car has a circle logo?

What are the differences between Volkswagen Passat and Magotan?

The main differences between Passat and Magotan are as follows: 1. Manufacturing plants: Passat is manufactured by SAIC Volkswagen, while Magotan is manufactured by FAW Volkswagen. 2. Body dimensions: Passat is slightly longer than Magotan. The length, width, and height of Passat are 4933mm, 1836mm, and 1469mm respectively, with a wheelbase of 2871mm. The length, width, and height of Magotan are 4865mm, 1832mm, and 1471mm respectively, with a wheelbase of 2871mm. 3. Vehicle interior: Passat features a practical style, while Magotan adopts a fashionable style. Passat's full LCD instrument panel, multi-color interior ambient lighting, and functions like CarPlay and CarLife smartphone connectivity enhance the practicality and technological feel of the car.

11

3

Share

What are the symptoms of a blown engine head gasket?

Below are the symptoms of a blown engine head gasket: 1. During engine operation, the temperature gauge suddenly shows an increase in coolant temperature. 2. When the accelerator pedal is pressed hard, coolant overflows or bubbles emerge from the expansion tank. 3. Oil and coolant stains are visible at the junction between the engine cylinder block and cylinder head. 4. During engine operation, there is a sound of high-pressure gas escaping in the engine compartment. 5. Oil stains floating on the coolant can be observed in the expansion tank. 6. When starting the engine, there is a noticeable lack of power, a significant drop in engine speed, accompanied by black smoke emissions.

15

4

Share

What is the maintenance reset method for the 2018 Emgrand?

The specific steps to reset the maintenance light for the 2018 Emgrand are as follows: 1. With the ignition switch in the off position, press and hold the "Reset" button. 2. Turn on the ignition switch, then release the "Reset" button. 3. Press the "Clock Adjustment" button once, and the maintenance cycle will display a resetting status. Wait a few seconds, and the display will return to the normal view. 4. After the maintenance light is reset, press the "Clock Adjustment" button four times in a row, and the multifunction display will show the mileage until the next maintenance. The maintenance light not being reset does not affect the car's performance. Its main function is to record the mileage of some important components. When the car reaches a certain mileage, the maintenance light serves as a reminder for the owner or mechanic. For the normal operation of the car, after maintenance, it is essential to reset the maintenance light; otherwise, when replacing parts next time, you won't be able to track the usage of the new components.

19

1

Share

Is a Driver's License Required to Buy a Car?

You do not need a driver's license to purchase a car, but you must have one to drive on the road. Here are some considerations when buying a car: 1. Inspect the exterior: Pay attention to the bumpers and body, check the gaps between doors and front/rear bumpers, open the doors to see if there is any color difference between the interior and exterior paint, etc. A qualified paint job should be smooth without water ripple defects, and there should be no color difference on easily damaged areas such as bumpers, body, door edges, and side mirrors. 2. Check the mechanics: Examine the battery and engine. A well-functioning engine should have no oil stains on the exterior, respond quickly when started, run smoothly without shaking, and produce no sharp or unusual noises. 3. Inspect the tires: New car tires should have no damage on the sidewalls and no nail puncture marks on the tread.

8

2

Share

How to Deal with Frost on Car Windows in Winter?

Here are solutions for frost on car windows in winter: 1. Ventilate before locking the car. Frost forms on windows due to moisture inside the vehicle. After parking, roll down the windows for about five minutes to effectively reduce frost buildup. 2. Wipe off the frost with a warm towel. If you're in a hurry, use a warm towel to remove the frost. 3. Warm up the car in advance. Start the car before heading out to maintain a warm interior environment. 4. Use an automotive anti-fog spray, which can effectively prevent and remove frost. 5. Cover the car with a car cover after parking at night.

5

1

Share

What is the sequence for parking an automatic transmission car?

There are five steps to parking an automatic transmission car: 1. After driving to the parking spot, press the foot brake to stop the car. 2. Shift the gear from D (Drive) or R (Reverse) to N (Neutral). 3. Engage the handbrake and turn off the engine. 4. Release the foot brake, but do not turn off the power (this is to confirm that the car can come to a complete stop under the effect of the handbrake). 5. Press the foot brake again, shift the gear from N (Neutral) to P (Park), release the foot brake, turn the key back to the off position, remove the key, unbuckle the seatbelt, open the door, exit the car, lock the doors using the remote key, and leave (remember to turn off the headlights before exiting the car at night).

10

0

Share

What car has a circle logo?

What are the differences between Volkswagen Passat and Magotan?

What are the symptoms of a blown engine head gasket?

What is the maintenance reset method for the 2018 Emgrand?

Is a Driver's License Required to Buy a Car?

How to Deal with Frost on Car Windows in Winter?

What is the sequence for parking an automatic transmission car?

How long does it take to fully charge a car battery that is dead and needs a jump start?

Will Seat Covers Affect Airbags?

What Happens When Using Low-Quality Gasoline?

When is the Best Time to Refuel Based on Remaining Fuel Level?