What car brands does FAW have?

What Causes Abnormal Noise When Braking Hard?

Abnormal noise when braking hard may be caused by rust on the brake discs or brake pads, or excessive wear of the brake discs and brake pads. Rust on Brake Discs: After parking for a long time, especially in humid weather or after rain, some rust or dirt may appear on the brake discs or brake pads. This issue can usually be resolved by driving for a while, or by applying butter or specialized lubricating oil to the connection between the brake pads and brake calipers. Rust on New Brake Pads: If there is noise when braking in a new car or after replacing the brake pads, it is because the new brake pads and brake discs need a break-in period. The noise during braking is completely normal. Excessive Wear of Brake Discs and Brake Pads: Brake discs and brake pads are high-wear items. Every time you brake, these two components rub against each other, leading to natural wear over time. When they become excessively worn, abnormal noise will occur. Therefore, regular inspection and replacement are necessary.

1

0

Share

Should the clutch be released after shifting to first gear when pulling over?

When pulling over and shifting to first gear, the clutch should be released. Here is relevant information: 1. Pay attention to the following areas where pulling over is not allowed: intersections, railway crossings, curves, narrow roads, narrow bridges, steep slopes, tunnels, and sections within 20 meters of these locations. Parking is also prohibited in areas with sidewalk barriers (hedges), crosswalks, construction zones, and opposite obstacles. Additionally, no parking is allowed in front of bus stops, tram stops, emergency stations, gas stations, fire hydrants, or fire stations, as well as within 30 meters of these locations. 2. Key points to note: When pulling over, the distance between the vehicle body and the outer edge line should be within 30cm. If the distance is too large, the left side may cross the line, and if it's too small, the right wheel may cross the line. You can align the raised part of the windshield wiper or one-third of the hood with the outer edge line and then attempt to park. It's important to note that when pulling over, don't just focus on the front; also check the rearview mirror to ensure the vehicle is parallel to the edge line.

5

2

Share

What are the symptoms of a damaged motorcycle cylinder?

The engine's temperature rises abnormally, causing abnormal thermal expansion of the cylinder and piston, leading to severe wear or seizure issues. Foreign objects entering the cylinder, such as a dislodged piston pin, can cause severe scratches on the cylinder wall. Insufficient engine oil can result in "dry friction," and in severe cases, "cylinder seizure" may occur. Below is relevant information: 1. Cylinder: Cylinders come in 2-stroke and 4-stroke types, with 2-stroke cylinders commonly used in motorcycles, chainsaws, lawn mowers, and other machines. 2. How a cylinder works: Generally, for the same displacement, more valves lead to better intake and exhaust efficiency. Traditional engines typically have one intake valve and one exhaust valve per cylinder. This two-valve configuration is relatively simple, cost-effective to manufacture, and easier to repair. For ordinary engines that do not require high output power, two valves can provide satisfactory engine output power and torque performance.

13

1

Share

Where is the bumper position for ramp fixed-point parking?

Ramp fixed-point parking bumper position is in the middle of the fixed-point parking yellow line. Ramp fixed-point parking requirements: For fixed-point parking, the vehicle's front bumper must be positioned in the middle of the fixed-point parking yellow line. The bumper must not exceed or fall short of the yellow line by more than 50 cm. Both front and rear right wheels must stop between the edge yellow line and white line. Ramp fixed-point parking standards: Parking outside the 50 cm range of the fixed-point line: deduct 10 points; Engine stalling: deduct 10 points; Parking with right side exceeding 30 cm range: deduct 10 points; Failing to move away within 30 seconds after engaging gear during start: fail; Rolling backward more than 30 cm: fail. Fixed-point parking method: Align the rotation axis of the right wiper with the right edge line (maintaining 30cm distance between vehicle and edge line), straighten the vehicle body and proceed slowly. Observe the lower edge of the left mirror - when the middle solid line is completely visible below the mirror, depress clutch and brake, then stop immediately.

14

4

Share

What are the inspection period regulations for diesel vehicles?

For diesel vehicles within the first 6 years of registration, they are exempt from physical inspection twice (inspection marks must be applied for every two years without requiring on-site vehicle testing). At the 6th and 8th year, the vehicle must undergo on-site inspection. For private vehicles over 10 years old, the original inspection cycle still applies: annual inspection for vehicles aged 10-15 years, and semi-annual inspection for vehicles over 15 years old. Below are relevant details: 1. New inspection rules: The updated regulations now include 7-9 seat non-commercial mini/micro buses (excluding minivans) within the 6-year exemption period. For non-commercial mini/micro buses (excluding minivans) aged 6-10 years, the inspection frequency changes from annual to biennial. 2. Regulations: Article 16 of the Implementation Regulations of the Road Traffic Safety Law stipulates: commercial passenger vehicles must be inspected annually within 5 years of registration, then semi-annually thereafter; trucks and large/medium non-commercial passenger vehicles must be inspected annually within 10 years of registration, then semi-annually thereafter.

11

5

Share

Is Turning the Car Key Counterclockwise to Turn Off the Engine?

Normally, turning the car key counterclockwise will switch it to the ACC position, and turning it one more position will turn off the engine. Below are the relevant details: 1. Car Ignition Switch: Turning the key to the ACC position can also be considered as turning off the engine, but it only partially powers on some electrical components. The car ignition switch has four positions: START, ON, ACC, and LOCK. After locking the car, the key will be in the LOCK state, which not only locks the steering wheel but also cuts off all power to the vehicle. The ACC state powers on some of the car's electrical devices, such as the CD player and air conditioning. During normal driving, the key is in the ON state, where all circuits in the vehicle are operational. The START position is for engine ignition, and after starting, it automatically returns to the normal ON position. 2. Precautions: It is extremely dangerous to turn the key to shut off the engine while the car is in motion. If the vehicle is a manual transmission, turning the key to shut off the engine while driving will cause the power steering to fail, making it difficult or impossible to steer the vehicle and control its direction.

8

3

Share

What car brands does FAW have?

What Causes Abnormal Noise When Braking Hard?

Should the clutch be released after shifting to first gear when pulling over?

What are the symptoms of a damaged motorcycle cylinder?

Where is the bumper position for ramp fixed-point parking?

What are the inspection period regulations for diesel vehicles?

Is Turning the Car Key Counterclockwise to Turn Off the Engine?

What are the characteristics of diesel fuel?

Why does the Yili Cannon not get fuel after replacing the filter element?

Should I repair my car at a 4S shop or an external repair shop after a rear-end collision?

How Long Can You Drive with Low Engine Oil?