What car brand is represented by three horizontal lines and one vertical line?

Solution for Idle Vibration in Classic Focus

Clean the fuel system and check the idle control valve for carbon deposits, which should be cleaned if present. Inspect the spark plugs for excessive carbon buildup and replace them if necessary. Check the fuel pressure and replace components as needed. Below is relevant information about the Focus: 1. Introduction: The Changan Ford Focus was launched at the Guangzhou Auto Show on November 20, 2020, with a total of eight models in the Focus family. The Changan Ford Focus family is built on Ford's new mid-size car platform, combining Ford's strong R&D capabilities and the collective wisdom of its global engineering team to set a new benchmark for driving pleasure in the mid-size car segment. 2. Performance: The Ford Focus is equipped with the EcoBoost180 turbocharged dual-injection engine paired with an 8-speed automatic transmission (the only one in its class), forming a "high-performance duo" that delivers a maximum power of 128 kW and a peak torque of 243 N·m, with a 0-60 km/h acceleration time of just 4.5 seconds.

1

5

Share

What Lights to Use When Making a Left Turn at Night?

When making a left turn at night on well-lit roads, use low beam headlights and the left turn signal. In situations with poor road visibility, you may use high beam headlights while also activating the left turn signal. Regardless of whether it's daytime or nighttime, always use the corresponding turn signal when turning. Below are the regulations for vehicle light usage: 1. During nighttime when streetlights are on, or when driving under low visibility conditions such as fog, rain, snow, dust, or hail, headlights, position lights, and rear position lights must be turned on. 2. When turning, changing lanes, overtaking, making a U-turn, or pulling over, the turn signal must be activated 100 to 50 meters in advance. 3. When a motor vehicle passes through an intersection controlled by traffic lights and makes a left turn, the turn signal must be activated, and low beam headlights must be used at night. 4. When a following vehicle is driving close to the vehicle in front in the same direction, high beam headlights must not be used.

2

4

Share

What are the effects of too much coolant?

There is no significant impact from overfilling the antifreeze. Excess antifreeze will expand due to heat during vehicle operation and overflow through the pressure relief valve, which is harmless. It may only leave some stains. It is advisable to use a syringe to remove any antifreeze above the MAX level. Typically, the coolant reservoir has MAX (maximum) and MIN (minimum) level markings, and the antifreeze should be filled between these two levels. Below are the functions of antifreeze: 1. Winter antifreeze protection: To prevent the coolant from freezing and causing the radiator or engine block to crack when the car is parked in winter, the freezing point of the coolant should be about 10°C lower than the lowest temperature in the region, preparing for sudden weather changes. 2. Anti-corrosion: The coolant should protect metal components from corrosion and prevent rubber parts from aging. 3. Anti-scaling: The coolant should minimize scale formation during circulation to avoid clogging the pipes and affecting the cooling system's heat dissipation function.

7

4

Share

How to check fuel consumption on older Q5 models?

The SET button located slightly to the lower left of the dashboard can be used to select and display the fuel consumption option. The fuel consumption data will then be shown on the central display screen of the dashboard. Below is some relevant information about the Audi Q5: 1. Exterior: The FAW Audi Q5 features a distinctive large grille front face design, with an overall stylish and attractive appearance. Its smooth body lines have received positive feedback from users. 2. Interior: The domestic Q5 has a reasonably laid-out and simple interior design, equipped with practical and rich configurations that offer a strong technological feel. The cabin features refined craftsmanship and high-quality materials. 3. Performance: It is powered by a 2.0TFSI four-cylinder inline engine paired with a 7-speed Stronic dual-clutch transmission, delivering ample power output, smooth gear shifting, and quick acceleration, which users have praised for its strong sense of push-back.

13

5

Share

How to solve the issue of erratic jumping of the four door locks in the Excelle central control system?

You can replace the door lock control assembly and central control module at a 4S dealership. Below is relevant information about the Excelle: 1. Exterior: The new Excelle mainly improves on details, with a more three-dimensional grille trim and a one-piece design for the lower air intake. The structure inside the headlight cavity has also been slightly adjusted. Compared to the older model, the new Excelle focuses on an upgraded powertrain, with improvements in fuel economy that will help enhance its market competitiveness. It is expected to remain a good choice for a family sedan after its launch. 2. Fuel consumption: The new Excelle 1.5L DVVT manual transmission has a combined fuel consumption of 6.6 liters per 100 kilometers, while the automatic transmission version consumes 7.6 liters. This represents a reduction of 1.1 liters and 0.4 liters respectively compared to the older 1.6L manual and automatic transmission models.

4

Share

Difference Between Single and Double Solid Lines

The differences between double solid lines and single solid lines: 1. Number of lanes differs: A single solid line indicates there is only one lane in the same direction; double solid lines indicate there are two or more lanes in the same direction. 2. Width varies: Roads with single solid lines are generally not very wide; roads with double yellow solid lines are usually more spacious. 3. Solid and dashed lines differ: Some sections of single yellow lines have dashed lines, indicating that vehicles are allowed to make left turns or U-turns in these areas; however, double yellow lines are different, with some sections having a dashed line on one side and a solid line on the other. Introduction to road markings: 1. Yellow dashed lines can serve as dividing lines or centerlines; when used as dividing lines, lane changes are permitted. 2. Lane dividing lines are white dashed lines, used to separate traffic flows moving in the same direction, and are marked on the dividing lines of lanes moving in the same direction.

17

5

Share

What car brand is represented by three horizontal lines and one vertical line?

Solution for Idle Vibration in Classic Focus

What Lights to Use When Making a Left Turn at Night?

What are the effects of too much coolant?

How to check fuel consumption on older Q5 models?

How to solve the issue of erratic jumping of the four door locks in the Excelle central control system?

Difference Between Single and Double Solid Lines

Can people without a driver's license buy a car?

What happens when the blower resistor of a 10-year-old Nissan Sylphy fails?

How far can the Wuling Hongguang Mini EV with a 120km range actually travel?

How to turn off the auto start-stop function in Audi Q5?