What car brand is represented by the three diamond-shaped icons?

1 Answers
LaDonovan
07/29/25 11:28pm
The three diamond-shaped icons represent Mitsubishi Motors, a subsidiary of the Japanese Mitsubishi Corporation Group (Mitsubishi). The three-diamond logo is designed to highlight the diamond-like craftsmanship of its vehicles, while also symbolizing the unity of all employees within the Mitsubishi organization. Taking the Mitsubishi Eclipse Cross as an example, the vehicle measures 4405mm in length, 1805mm in width, and 1685mm in height, with a wheelbase of 2670mm. It is a 5-door, 5-seater SUV equipped with a 6-speed manual transmission and a 1.5L L4 turbocharged engine, delivering a maximum horsepower of 170ps and a peak torque of 250nm.
Was this review help?
3
4
Share
More Forum Discussions

What are the center console buttons in the Buick Velite 6?

The center console buttons in the Buick Velite 6, from left to right, are the hazard warning lights, return to home, previous and next track, screen on/off and volume adjustment, and door central locking. Below is some relevant information about the Buick Velite 6: 1. Overview: The Buick Velite 6 is an intelligent plug-in hybrid vehicle equipped with Power-Split power distribution technology, offering a maximum combined range of 780 kilometers and an ultra-low combined fuel consumption of 1.4L per 100 kilometers. 2. Transmission: It uses an E-CVT transmission, which enables hybrid/electric-only/engine-only driving modes. In addition to 'Normal' and 'Sport' driving modes, this vehicle also features a 'Hold' mode (essentially a battery hold mode).
5
5
Share

What Causes Oil Leakage in the Front Shock Absorber of a Car?

Oil leakage in the front shock absorber of a car is due to mechanical damage in the shock absorber's structure. The front shock absorbers in cars typically use strut-type shock absorbers, where there is an oil film between the oil seal cover and the spring seat. If the oil film remains between the oil seal cover and the spring seat, it indicates that the shock absorber is functioning normally. However, if there is oil leakage below the spring seat or the spring bracket, or if droplets of oil appear, this signifies that the front shock absorber is damaged and needs to be replaced promptly. The shock absorber is designed to quickly dampen the vibrations between the car frame and the body, improving the smoothness and comfort of the ride. Shock absorbers are installed in the car's suspension system, with the most commonly used type being the double-acting telescopic shock absorber.
15
5
Share

Will Keeping Brake-Hold On Damage the Car?

Keeping brake-hold on will not damage the car, and this function can be used for a long time. Brake-hold is an automatic parking system, and the function of the automatic parking technology is to prevent the vehicle from rolling backward, which is especially suitable for uphill and downhill slopes and frequent starting and stopping. The specific content is introduced as follows: 1. The function of brake-hold: Brake-hold allows the driver to avoid unnecessary sliding of the vehicle without the need for prolonged braking or activating the electronic parking brake. In addition, this function can also prevent the vehicle from rolling backward when starting on a slope. Brake-hold automatic parking is a very practical function. 2. Points to note when using brake-hold: Brake-hold does no harm. The only thing worth noting is that after getting used to it, you should be careful when driving a car without this function after braking, and do not habitually take your foot off the brake.
8
0
Share

What are the reasons for the Honda CRV air conditioning not cooling?

The reasons for the air conditioning not cooling are roughly as follows: 1. Insufficient refrigerant: Insufficient refrigerant causes the compressor not to work. When the refrigerant is insufficient, it will cause the air conditioning clutch to frequently engage, or even the compressor not to work. Check by bridging the low-pressure cycle switch. If it engages, it is mostly caused by refrigerant leakage. 2. Air conditioning clutch relay failure: The air conditioning clutch relay failure causes the compressor not to work. Check the condition of each terminal of the air conditioning clutch relay 14. There should be 12V voltage on terminals 30 and 85; terminal 87 should have a resistance of several ohms to ground; terminal 86 is the ground terminal provided by the PCM. After turning on the air conditioning, the resistance should be below 10Ω. Bridge terminals 30 and 87, and the clutch should engage. Otherwise, it is an air conditioning clutch relay failure (coil failure, poor coil grounding, or poor contact).
17
5
Share

What are the symptoms of a clogged radiator?

Consequences of a clogged car radiator: The coolant cannot circulate effectively between the radiator and the engine, reducing the radiator's cooling performance. The decrease in the radiator's cooling performance causes the engine temperature to rise rapidly. If the vehicle continues to be driven under these conditions, the engine may suffer from cylinder scuffing. Below is a partial introduction to the car radiator: 1. Main components: The radiator is part of the car's cooling system. The radiator in the engine's water cooling system consists of three parts: the inlet chamber, outlet chamber, main plate, and radiator core. 2. Main function: When the engine's water temperature is high, the water pump circulates water repeatedly to lower the engine's temperature, thereby protecting the engine. In winter, if the water temperature is too low, the water circulation stops to prevent the engine temperature from becoming too low.
17
1
Share

What are the hazards of a loose lower control arm ball joint?

The hazards of a loose lower control arm ball joint are as follows: it can cause the vehicle to deviate from its intended path, result in abnormal tire wear, steering wheel vibration, heavy steering, and may even lead to loss of vehicle control. Below are specific details about the symptoms of a damaged lower control arm ball joint: 1. Steering wheel: At high speeds, the steering wheel may vibrate, and there may be abnormal noises when driving on bumpy roads. 2. Safety: It directly affects comfort and safety. Below is related information on repairing a lower control arm ball joint: 1. Jack: Use a jack or lift to raise the vehicle, then continuously shake the wheel to check for play and determine whether the steering linkage ball joint or the upper/lower control arm ball joint is damaged. 2. Hand shaking: Hold the tie rod or drag link and shake it left and right to check for looseness. 3. Road judgment: If abnormal noises occur when turning at large angles, it indicates damage to the ball joint.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.