What car brand is represented by the T logo?

What are the precautions for driving on highways at night?

Driving on highways at night requires extra attention to safety. Here are the precautions: 1. Avoid fatigue driving: Night driving consumes more energy than daytime driving, so ensure you are well-rested before driving at night to have enough energy to handle unexpected situations on the road. 2. Do not speed: Drive at a lower speed when in a speed-limited lane. 3. Learn to use lights correctly: Use high beams when driving on highways at night, and switch between high and low beams when meeting or overtaking other vehicles to alert them. 4. Watch out for obstacles: Pay close attention to obstacles on the road and take measures in advance to avoid them. 5. Prohibit dangerous driving behaviors: Drunk driving and drug-impaired driving are strictly prohibited. These behaviors are extremely hazardous and are major factors leading to accidents.

16

4

Share

What is the function of a car throttle?

The function of a car throttle is to control the engine's air intake flow, thereby affecting the engine's operating conditions. It is often referred to as the "throat" of the engine. Here is some additional information about the throttle: 1. Consequences of failure: Throttle failure can lead to reduced vehicle power, unstable idling, and in severe cases, it can cause the engine fault light to illuminate, as well as a significant increase in fuel consumption. 2. Causes of failure: Throttle failures are often caused by poor air quality and fuel quality. Carbon deposits generated during gasoline combustion can contaminate the throttle due to negative pressure, preventing it from closing properly and leading to throttle failure.

17

0

Share

Can the ETC card still be used if it is pulled out?

The ETC machine cannot be used if the card is pulled out, but it can be used again by reinserting it before entering the highway. According to the "Rules for the Use of Non-Stop Rapid Transit Systems," the ETC card must be inserted into the OBU device to function properly; otherwise, user information cannot be read. If the card is removed, you can use the manual lane and have the staff swipe the card. When the ETC card is inserted into the OBU device, a prompt sound will indicate that the device is activated. Without the card, the device remains in a dormant state and cannot recognize vehicle information at toll stations, so the ETC cannot be used if the card is pulled out. ETC is an electronic toll collection system, also known as an automatic road toll system. It is a specialized method for toll roads, commonly seen on highways, toll bridges or tunnels, and certain urban sections to alleviate traffic congestion. ETC Deduction Principles: Highways have one or more ETC lanes. Through microwave short-range communication between the vehicle's windshield-mounted electronic tag and the microwave antenna in the ETC lane, the system uses computer networking technology to settle payments with banks, allowing vehicles to pass toll stations without stopping. This operates on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in queues; Green and eco-friendly: Reduces noise and exhaust emissions by avoiding stops at toll stations; Reduced wear and tear: Saves costs by minimizing frequent starts and stops, lowering vehicle wear and fuel consumption; Improved efficiency: ETC lanes can theoretically increase traffic efficiency by 2-3 times, making traditional ETC faster and more advanced. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council's "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" explicitly states the goal of "achieving intercity transportation card interoperability in key urban clusters by 2020 and significantly increasing the proportion of vehicles equipped with ETC," with a target of "50% ETC usage rate for road passenger vehicles by 2020." Future possibilities: Beyond improving ETC installation convenience and passenger vehicle usage rates, future efforts will promote ETC adoption for trucks and explore deeper integration with smart transportation developments like vehicle-to-vehicle communication and vehicle-to-infrastructure coordination, providing comprehensive travel services for car owners. This means more application scenarios will support ETC usage.

10

4

Share

Why is the car shaking violently?

The reasons for severe car shaking may include the following three: 1. Unbalanced wheels: Wheel imbalance is a common issue in many cars. Since it's impossible to ensure uniform quality during the manufacturing of tires and steel rims, wheels need to undergo dynamic balancing after assembly. Moreover, as tires wear out over time, periodic dynamic balancing is necessary after certain mileage. 2. Loose suspension components: The chassis suspension consists of various links and support arms, connected through ball joints and rubber bushings. Normally, these connections are tight, but as ball joints and bushings wear out, the components loosen, causing the suspension to become loose and resulting in body shaking while driving. 3. Excessive steering gear clearance: The car's steering system uses a rack-and-pinion mechanism to convert the steering wheel's rotation into wheel movement. Over time, wear between the gear and rack creates play, causing slight lateral wheel movement even without steering input, which leads to a sensation of body shaking.

12

2

Share

How to turn off the hill start assist after it is activated?

Hill start assist is a default function that cannot be turned off. Here is some information about hill start assist: 1. This function usually does not have a button. When the car is parked on a slope with the gear in the forward position and the brake pedal is released, the hill start assist will automatically activate. In some vehicles, the function will activate after the brake pedal is pressed. The braking time is only a few seconds, and there is a risk of rolling back if the accelerator is not pressed in time. 2. The hill start assist system on a car is usually integrated with the Electronic Stability Program (ESP). If the ESP on the car remains turned on, the hill start assist function will also remain on by default.

19

2

Share

What is the difference between the Tiguan and the Tiguan L?

Here are the specific differences between the Tiguan and the Tiguan L: 1. Class: The Tiguan and Tiguan L are SUVs of different classes. The Tiguan is a compact SUV, while the Tiguan L is a midsize SUV. The Tiguan measures 4506*1809*1682mm with a wheelbase of 2684mm, while the Tiguan L measures 4712*1839*1673mm with a wheelbase of 2791mm. 2. Configuration: Both models are well-equipped with basic features, but the Tiguan L adds keyless start and engine start-stop technology. 3. Power: Both the Tiguan L and Tiguan use turbocharged engines, but the Tiguan L employs hybrid injection technology.

16

0

Share

What car brand is represented by the T logo?

What are the precautions for driving on highways at night?

What is the function of a car throttle?

Can the ETC card still be used if it is pulled out?

Why is the car shaking violently?

How to turn off the hill start assist after it is activated?

What is the difference between the Tiguan and the Tiguan L?

What is the fuel consumption of the Dodge Ram pickup truck?

What transmission does the Citroën C5 use?

Where to Add Windshield Washer Fluid?

Can I buy a car in another city and register it locally?