What car brand has the three M logo?

1 Answers
RobertAnn
07/29/25 8:57pm
Three M is the logo of Maybach. Here are detailed introductions about Maybach: 1. Overview: Maybach is a luxury car brand under Mercedes-Benz. Maybach is an automobile brand. Maybach (German: Maybach) and Maybach-Motorenbau-GmbH were once active in Europe from 1921 to 1940 as a German ultra-luxury automobile brand and manufacturer. 2. Logo design concept: The legendary brand logo consists of two crossed M's enclosed in a spherical triangle. At the beginning of the brand's creation, the two M's represented the abbreviation of maybach-motorenbau, while now the two M's stand for the abbreviation of maybach-manufaktur.
Was this review help?
15
4
Share
More Forum Discussions

What to Do When a Car Rolls Backward on a Slope?

When starting a car on an uphill slope, it is prone to rolling backward. To prevent this, simply pull the handbrake tight, slowly lift the clutch to the engagement point, then immediately stabilize the clutch and release the handbrake. This will prevent the car from "rolling back." If the slope is steep, you may need to gently press the accelerator before releasing the handbrake. Steps for starting on a slope: 1. Press the brake and clutch pedals to prepare for starting. 2. Press the brake pedal and slowly lift the clutch pedal to the half-engagement point. 3. Release the brake pedal, press the accelerator pedal, and, while maintaining the half-engagement state, release the handbrake and slowly lift the clutch pedal. 4. After gaining speed, adjust the accelerator pedal and fully release the clutch pedal.
12
2
Share

Is the barrel water for automotive urea toxic?

Automotive urea barrel water is non-toxic. The barrels for automotive urea generally need to meet food-grade packaging standards. For example, Calorie automotive urea barrels are made from new HDPE material, and after thorough cleaning, they can be used to hold drinking water or even alcohol. However, it is crucial to ensure they are thoroughly cleaned. Below is additional information: 1. Function of automotive urea: The primary function of automotive urea solution is to convert nitrogen oxides in vehicle exhaust into harmless nitrogen and water, which is energy-saving and environmentally friendly, helping vehicles meet national exhaust emission standards. 2. Precautions: Automotive urea must use ultra-pure water of electronic industry grade. Since the SCR catalyst carrier is highly susceptible to metal ion poisoning, which can lead to loss of catalytic effectiveness, automotive urea solution must use ultra-pure water of electronic industry grade (resistivity ≥18MΩ?9999cm).
10
1
Share

What Are the Yellow Spots on a White Car?

Yellow spots on white car paint are formed by the oxidation of dust particles containing various chemical components in the air that adhere to the car's surface. If not cleaned, they can damage the paint and affect the appearance of your beloved car. Here are some relevant details: 1. Hazards: Yellow spots on car paint are commonly seen on white and silver cars. These spots are usually caused by iron particles floating onto the paint surface, which rust and form yellow spots after exposure to rainwater. They are difficult to remove with regular car washing and, over time, can corrode the inner layers of the paint, leading to peeling. 2. Solutions: If you are particularly concerned about your car's paint, you can apply a layer of paint protection film (PPF). PPF is essentially a transparent film applied to the car's surface to protect the paint.
7
3
Share

Does the Lavida have a reverse camera?

The high-end version of the Lavida comes with a reverse camera, while the base model does not, but it can be installed separately. The reverse camera monitoring system is particularly important for novice drivers, offering a more intuitive and practical solution compared to all-around parking sensors. Additional information: 1. The reverse camera, also known as a parking assist system, reverse visual system, or onboard monitoring system, is now widely used in various large, medium, and small vehicles for reversing or driving safety assistance. 2. The reverse camera system is installed at the rear of the vehicle, providing a clear and direct view of the area behind the car when reversing, which is highly practical for reversing safety. Installation is straightforward; typically, a basic single-output reverse camera only requires connecting the positive power wire to the positive terminal of the car's reverse light power supply and the negative power wire to the negative terminal of the reverse light or to ground (GND).
16
0
Share

What brand are the original tires on the Corolla?

Corolla's original tires are Hankook tires. Here is the relevant information: 1. On June 12, 2021, Hankook Tire announced that it would begin supplying original equipment tires for the all-new 2020 Toyota Corolla. Starting in April of this year, the Hankook Kinergy GT [H436] tires will be equipped on the new Corolla models. 2. Since 2013, Hankook Tire has been the supplier of original equipment tires for the Corolla models. Today, the new Corolla will continue to use Hankook original equipment tires. The redesigned and upgraded Corolla features a novel and dynamic design, achieving comprehensive optimization in agile handling, comfortable experience, and exquisite craftsmanship. It also comes standard with the advanced Toyota Safety Sense 2.0, which integrates driving assistance functions such as the pre-collision safety system.
13
1
Share

Does the car consume fuel when idling?

When the vehicle is idling, it does consume fuel, although the fuel consumption rate is relatively low. However, idling is not good for the engine. Here are some explanations about vehicle idling: 1. Idling refers to a working condition where the engine runs without any load. When the engine is running, if the accelerator pedal is completely released, the engine enters the idling state. 2. When adjusting the idle speed, the RPM should not fluctuate abruptly, as this can cause premature wear to the engine. It is best to have the idle speed adjusted at an automotive repair facility. 3. Idling means the engine operates without any external load, only overcoming the internal friction resistance of its components. It does not output power externally. The minimum RPM required to maintain stable engine operation is called the idle speed, which is one of the five basic operating conditions of an engine. For a well-functioning engine, the idle speed typically ranges from 550 to 800 RPM.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.