What car brand has a trident logo?

How many kilometers can the BYD Qin travel on a full charge?

BYD's production version of the Qin can travel 700km in hybrid mode and 70km in pure electric mode on a full charge, automatically switching to hybrid mode when the remaining battery level drops to 15%. Below are the relevant details: 1. Body dimensions: The length, width, and height are 4765mm, 1837mm, and 1495mm respectively, with a wheelbase of 2718mm. 2. Powertrain: Equipped with a 1.5L naturally aspirated engine, this engine has a maximum power of 81kW at 6000 rpm and a maximum torque of 135Nm at 4500 rpm. The engine features multi-point fuel injection technology and uses an aluminum alloy cylinder head and block. 3. Suspension: The front suspension uses MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.

10

5

Share

Which is More Premium, Vellfire or Alphard?

Below is a comparison between Vellfire and Alphard: 1. Exterior Design: Front Grille: The Vellfire features a layered front grille with upper and lower sections connected, and the sport version adopts a large-sized horizontal grille; while the Alphard uses an exaggerated 'large fang' grille, with chrome strips extending into the headlights. 2. Headlights and Taillights: The Vellfire adopts split-type headlights and taillights, whereas the Alphard uses integrated ones. Emblem: The Vellfire's front emblem is Toyota's bullhead logo, while the Alphard has a dedicated emblem. 3. Interior and Functional Features: Both models offer optional black and beige interior trims. Features exclusive to Alphard but not Vellfire: Electric trunk position memory, headlight delay-off, and second-row seat front/rear adjustment. Features exclusive to Vellfire but not Alphard: Full vehicle keyless entry (Alphard only has front-row keyless entry), rear multimedia control, and a streaming media rearview mirror.

4

0

Share

What does the exclamation mark next to the steering wheel indicate as a fault light?

The exclamation mark next to the steering wheel is the electronic power steering fault light. When the steering wheel light on the car dashboard illuminates with an exclamation mark beside it, it indicates an issue with the vehicle's power steering system. At this point, the power steering assistance may be weakened or completely lost, making the resistance when turning the steering wheel several times greater than usual. Power steering is a system that assists the driver in adjusting the car's direction, reducing the effort required to turn the steering wheel. Problems with the power steering system can result in heavy steering, unusual steering noises, steering wheel vibrations, poor steering wheel return ability, among other issues. Reasons for the power steering warning light to illuminate include: 1. The presence of a large amount of air in the power steering system, causing abnormal steering; 2. Foreign objects in the steering hydraulic lines leading to the steering pump flow control valve sticking; 3. Loose connections in the power steering system causing steering fluid leaks; 4. Excessive wear of the steering gear piston cylinder, poor oil seal sealing, or control valve sticking or damage.

10

2

Share

What Causes the Tachometer to Drop When Accelerating?

The specific reasons for the engine RPM dropping when accelerating are as follows: 1. Use an oil pressure gauge to measure the fuel system's oil pressure to check if there is any leakage in the fuel system. A slow leak in the fuel system can lead to low oil pressure when the engine is cold, making it difficult to start (common leakage points include the fuel injector and fuel pump); 2. Check if the carbon canister is severely clogged; 3. Inspect if there is an issue with the carbon canister solenoid valve. If the solenoid valve remains closed, gasoline vapor in the carbon canister will accumulate more and more, eventually filling the entire canister, with the excess vapor escaping into the atmosphere. Conversely, if the solenoid valve remains open, the air-fuel mixture in the engine intake will remain in an enriched state. Since the engine control unit has not yet activated the solenoid valve, it will not issue a command to reduce fuel injection, resulting in an overly rich mixture when the engine is hot, causing the engine to stall.

8

4

Share

How to Replace the Wiper Blades on a Changan Eado?

Here are the steps to replace the wiper blades on a Changan Eado: 1. After turning off the engine or power, within 10 seconds, pull the wiper switch toward the steering wheel. The wiper blades will automatically move to the center position of the windshield. 2. Lift the wiper blades away from the glass and press the release tabs on both sides of the wiper. Pull the wiper blade to detach it from the wiper arm and remove the blade. Below is some related information about wipers: 1. Wipers, also known as windshield wipers, are devices used to remove rain and dust from a vehicle's windshield, improving visibility and enhancing driving safety. Due to legal requirements, almost all vehicles worldwide are equipped with wipers. Rear windows of hatchbacks and SUVs also often have wipers. Other transportation vehicles, such as trains and trams, are also equipped with wipers. 2. The key to ensuring wipers function effectively: The rubber wiper blades must remain adequately moist. Only with sufficient moisture can they maintain excellent flexibility and ensure tight contact with the windshield.

18

5

Share

Why is there no power in the car?

Reasons for no power in the car: 1. The battery is aged and scrapped; 2. The car has been parked for too long, causing the battery to lose power; 3. A car circuit failure prevents the battery's power from reaching the entire vehicle; 4. The fuse circuit is burned out or has poor contact. If the entire vehicle has no power, it should be promptly checked and repaired at a maintenance shop. Methods to troubleshoot no power in the car: 1. Choose a suitable current clamp, connect the output end to the diagnostic instrument, and after matching, call up the current detection interface; 2. Confirm the connection direction of the current clamp's positive and negative poles—the current arrow should be consistent with the actual current direction, ensuring the current clamp is fully closed; 3. After confirming the equipment is correctly connected, turn off the vehicle's power and lock it, wait for the vehicle to enter sleep mode, then detect the vehicle's static current. If the static current is too high or fluctuates significantly, it indicates a leakage phenomenon in the vehicle.

1

3

Share

What car brand has a trident logo?

How many kilometers can the BYD Qin travel on a full charge?

Which is More Premium, Vellfire or Alphard?

What does the exclamation mark next to the steering wheel indicate as a fault light?

What Causes the Tachometer to Drop When Accelerating?

How to Replace the Wiper Blades on a Changan Eado?

Why is there no power in the car?

Why Do Japanese Cars Fall Apart Upon Impact?

What car has 7 stars?

What is the weight of the Dongfeng Fengguang S560?

Does Using Cruise Control Consume More Fuel?