What car brand has a logo with five vertical bars?

1 Answers
JordanMarie
07/29/25 7:06pm
Five vertical bars represent the logo of WM Motor, a Chinese independently produced pure electric vehicle brand. The WM EX5 features front-wheel drive, with a front suspension system consisting of MacPherson independent suspension with a stabilizer bar, and a rear suspension system using a variable cross-section torsion beam suspension. The front fascia of the WM EX5 adopts the commonly seen closed grille design for electric vehicles, with the WM Motor logo on the charging cover displaying battery information. Below is an introduction to WM Motor: Introduction to WM Motor Brand: WM Motor (WM-Motor) was established in 2015, headquartered in Shanghai, China. Core R&D Technologies: WM Motor has established a comprehensive testing and certification system centered around the three-electric system (battery, motor, and electric control), covering areas such as three-electric systems, chassis, safety, NVH, electronic and electrical components, interior and exterior trims, autonomous driving, and intelligent systems. This includes 120 vehicle-level tests, 3,400 system-level tests, over 14,000 component-level tests, and 34 calibration tests. It is a fully self-developed, comprehensive electric vehicle testing and development system, and one of the first in China to complete the development process and technical standards centered on the three-electric system. Introduction to WM Maven Concept Car: The WM Maven concept car is WM Motor's first pure electric sedan mass-production concept version, with an NEDC comprehensive range of 800km, equipped with L3 autonomous driving, L4 full-scenario automatic parking, and 5G connectivity technologies.
Was this review help?
2
4
Share
More Forum Discussions

Should You Shift to Neutral When Waiting in Subject 2 Parking?

When waiting during Subject 2 parking, you can shift to neutral. The standard procedure requires engaging the handbrake and shifting to neutral before restarting the engine after shutting it off. However, during the exam, to quickly restart the engine, you may directly press the brake and clutch to ignite (if the system doesn't penalize this), depending on the test site's evaluation rules. Extended explanation: Notes: For Subject 2, one free retake is allowed if you fail the first attempt. Failing the retake ends the test session. In non-parking test items, pausing midway deducts 5 points (vehicle stationary for over 2 seconds counts as midway parking).
14
1
Share

Should the clutch be pressed continuously when waiting at a red light in Subject 3?

During the Subject 3 exam, when stopping at a red light, you can directly press the clutch and brake, then shift into first gear without pulling the handbrake. The following is an extended introduction: The content of the Subject 3 road driving skills test includes: preparation for large buses, tractors, city buses, medium-sized buses, large trucks, small cars, small automatic transmission cars, low-speed trucks, and small automatic transmission cars for the disabled, simulated nighttime lighting test, passing pedestrian crossings, passing school zones, and nighttime driving; the test content for other permitted vehicle types is determined by the provincial public security traffic management department. Test mileage: large buses and medium-sized buses must cover at least 20 kilometers, including at least 10 kilometers during the day and 5 kilometers at night. Tractors, city buses, and large trucks must cover at least 10 kilometers, including at least 5 kilometers during the day and 3 kilometers at night.
12
2
Share

Can I familiarize myself with the test site before the Subject 2 driving test?

Many test sites now allow candidates to familiarize themselves with the venue before the Subject 2 driving test, usually before the test begins or after it concludes. It is highly recommended that candidates who have the opportunity should get acquainted with the test site in advance. Familiarizing yourself with the site not only helps alleviate nervousness about the unfamiliar environment but also aids in adapting to the test site's variations beforehand. Below is an extended introduction: Things to Note: Memorize the Test Routes: Typically, there are about 3 test routes, and the reference points on each route may vary. Therefore, it is essential to memorize these routes during the practice session the day before the test. Get Familiar with the Test Vehicle: During regular practice sessions, candidates usually use training vehicles, which may differ from the actual test vehicles. The pre-test practice at the test site provides an excellent opportunity to become familiar with the test vehicle.
20
2
Share

Is there a time limit for the S-curve in Subject 2?

There is no time limit for the S-curve in Subject 2. As long as you maintain a normal speed during the curve driving and avoid stopping midway, there's no need to worry about the time. The key is to master the driving techniques. Here is an extended introduction: Precautions: In curve driving, the size of the wheel difference is related to the steering angle of the car and the length of the wheelbase. The larger the steering angle or the longer the wheelbase, the greater the difference between the inner and outer wheels. For small cars, the inner wheel difference is about 0.8-0.9 meters, and the outer wheel difference is about 0.7 meters. The size of the inner wheel difference depends on the steering angle and the length of the wheelbase. The larger the steering angle, the greater the inner wheel difference, and vice versa; the longer the wheelbase, the greater the inner wheel difference, and vice versa.
4
3
Share

What are the precautions for speed control training in Subject 2?

Precautions for speed control training in Subject 2 are as follows: Starting: Most of Subject 2 relies on clutch driving, which tests the control ability of the trainees. When starting, slowly lift the clutch to the semi-engagement point. At this time, the vehicle speed will suddenly drop, and the body will shake. Then you can release the brake and start smoothly. Speed control: In Subject 2, too high or too low speed can easily affect the operation. Learning to use the clutch to control the speed is crucial for the Subject 2 test. However, it should also be noted that during the test, do not deliberately press the clutch for the convenience of observation, just drive according to your usual habits. Gear shifting: In most areas, only first gear and reverse gear are used in the Subject 2 test. As long as you remember the gear positions, you will not make mistakes. The most common mistake is not engaging the gear properly. When shifting gears in the Subject 2 test, you must press the clutch to the bottom before shifting gears.
16
5
Share

Does Drinking Glucose Really Help with Nervousness During the Driving Test Phase 3?

Entering the examination venue with nervousness cannot be alleviated by drinking glucose; the tension should be relieved by oneself. After glucose is absorbed by the small intestine, it circulates in the bloodstream, providing energy for the brain—thus aiding brain function. When examinees have sufficient food intake and glucose supply, their brain energy is ensured, leading to high energy levels, active thinking, good memory, and consequently better test results. Here is an extended introduction on the topic: Precautions for drinking glucose: Glucose is easy to digest and absorb. For patients with indigestion, especially those with hypoglycemia, it can be used to promptly supplement sugar. However, as a common food, it cannot be used as a long-term substitute for sugar like white sugar, brown sugar, or rock sugar, as it is not beneficial for health.
14
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.