What car brand has a horse head logo?

1 Answers
DeSarah
07/30/25 1:31am
A horse head logo represents Baojun Automobile, which is a 5-door, 5-seater compact SUV under SAIC-GM-Wuling. Taking the Baojun 510 as an example, its body dimensions are: length 4220mm, width 1740mm, height 1615mm, with a wheelbase of 2550mm, fuel tank capacity of 45 liters, and trunk capacity ranging from 318 to 1210 liters. The Baojun 510 is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 99 PS and a maximum power output of 73 kW. It is paired with a 6-speed manual transmission and features MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.
Was this review help?
4
5
Share
More Forum Discussions

What is the fuel consumption of the Subaru Outback?

Subaru Outback's fuel consumption is 7.4l. Taking the Outback 2021 2.5i EyeSight Edition as an example: it is a medium-sized 5-door 5-seat SUV crossover, with dimensions of 4880mm in length, 1875mm in width, and 1670mm in height, and a wheelbase of 2745mm. It is equipped with a CVT continuously variable transmission (simulating 8 gears) and a fuel tank capacity of 63l. The Outback 2021 2.5i EyeSight Edition's engine has a maximum power of 124 kilowatts, with a maximum power speed of 5000 to 5800 revolutions per minute. The drive system uses front-engine four-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of double-wishbone independent suspension.
20
1
Share

What is the fuel consumption of the Lynk & Co 03?

The fuel consumption of the Lynk & Co 03 ranges from 5.5 to 7.4 liters per 100 kilometers. Taking the 2021 Lynk & Co 03 1.5TD Manual Pure Lite as an example: it is a compact 4-door 5-seater sedan with a length, width, and height of 4639mm, 1840mm, and 1472mm respectively, a wheelbase of 2730mm, and a top speed of 205 kilometers per hour, equipped with a 6-speed manual transmission. The 2021 Lynk & Co 03 1.5TD Manual Pure Lite uses a 1.5T inline 3-cylinder engine, with a maximum torque of 245 Newton-meters and a maximum power of 115 kilowatts. The drive mode is front-wheel drive, and it comes with features such as seatbelt reminder, tire pressure monitoring, brake force distribution, brake assist, and electronic stability control.
7
5
Share

How to reset the tire pressure monitoring light on the 2017 Magotan?

The reset method for the tire pressure monitoring light on the 2017 Magotan is as follows: After addressing the tire pressure issue, first turn on the ignition switch, then press and hold the tire pressure monitoring reset button. Release the button upon hearing a "ding" sound. The tire pressure monitoring system will then store the current normal tire pressure data, automatically clear the previous data, and finally, the fault light on the dashboard will turn off, completing the tire pressure reset. Tire pressure monitoring involves real-time automatic monitoring of tire pressure during vehicle operation, alerting the driver to tire leaks or low pressure to ensure driving safety. There are three common types of tire pressure monitoring systems: Direct tire pressure monitoring: This system uses pressure sensors installed in each tire to directly measure tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure for each tire. The system automatically alerts the driver if the tire pressure is too low or if there is a leak. Indirect tire pressure monitoring: When a tire's pressure decreases, the vehicle's weight causes that tire's rolling radius to become smaller, making it rotate faster than the other tires. By comparing the rotational speed differences between tires, the system monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the direct and indirect systems. It equips direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a fully direct system, this hybrid system reduces costs and overcomes the indirect system's inability to detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as effectively as a direct system.
1
4
Share

Where is the cabin air filter located in the BMW 1 Series?

The cabin air filter in the BMW 1 Series is located behind the glove compartment on the passenger side. To replace the cabin air filter, you need to remove the glove compartment on the passenger side, as this is the only way to access and replace the filter. Below is an introduction to the BMW 1 Series: 1. The BMW 1 Series is a compact car produced by BMW. The domestic version of the BMW 1 Series is a front-wheel-drive model. The domestic BMW 1 Series has a wheelbase of 2670 mm, with length, width, and height dimensions of 4456 mm, 1803 mm, and 1446 mm, respectively. 2. The BMW 1 Series is equipped with two engines: a 1.5-liter turbocharged three-cylinder engine and a 2.0-liter turbocharged four-cylinder engine. 3. The 1.5-liter turbocharged engine delivers 140 horsepower and a maximum torque of 220 Nm. This engine achieves its maximum power output at 4600 to 6500 rpm and maximum torque at 1480 to 4200 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 4. The 2.0-liter turbocharged engine produces 192 horsepower and a maximum torque of 280 Nm. This engine reaches its maximum power output at 5000 to 6000 rpm and maximum torque at 1350 to 4600 rpm. It also features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 5. The domestic version of the 1 Series uses a MacPherson independent suspension at the front and a multi-link independent suspension at the rear.
11
2
Share

Why Does an Automatic Transmission Car Experience Jerking When Shifting Gears?

Automatic transmission cars experiencing jerking when shifting gears is often due to insufficient transmission fluid or the need for a fluid change. The transmission fluid in automatic cars must be replaced regularly because gear shifting relies entirely on this fluid. Only through regular replacement can the normal operation of internal transmission components be ensured, preventing jerking sensations. Transmission fluid is a lubricant that keeps the gear system clean, ensuring the transmission works properly and extending the lifespan of the drivetrain. Automatic transmission gear positions are generally indicated by the letters P, R, N, D, S, and L, representing Park, Reverse, Neutral, Drive, Sport mode, and Low gear mode, respectively.
6
0
Share

Why can't the right rear door of a Mercedes-Benz be opened from the inside?

The reason why the right rear door of a Mercedes-Benz cannot be opened from the inside is that the child lock is engaged. You need to use a key or a similar object to toggle it. The car child lock, also known as the door lock child safety feature, is located on the rear door lock. After opening the rear door, there is a small lever (safety mechanism) below the door lock. Move it towards the end with the child icon, then close the door. At this point, the door cannot be opened from the inside but only from the outside. Taking the 2021 Mercedes-Benz GLS 400 4MATIC as an example: it is a large 5-door 7-seat SUV equipped with a 9-speed automatic transmission, with a top speed of 235 kilometers per hour.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.