···
Log in / Register

What can be used to remove engine oil from shoes?

4 Answers
LawsonLee
07/29/25 3:28pm
Gasoline or alcohol can be used to remove it. Below is relevant information about gasoline: 1. Definition of gasoline: Gasoline is a volatile, flammable hydrocarbon mixture liquid obtained from petroleum through distillation and cracking, which can be used as fuel. 2. Important characteristics of gasoline: The key properties of gasoline include volatility, stability, anti-knock quality, corrosiveness, and cleanliness. 3. Difference between 95-octane and 92-octane gasoline: 95-octane gasoline has better anti-knock quality than 92-octane. The better the anti-knock quality, the less likely the engine is to experience knocking.
Was this review help?
5
5
Share
AriannaLee
08/14/25 8:24am
I accidentally spilled engine oil on my canvas shoes while repairing the car, and found that dishwashing detergent works quite well. Pour some strong kitchen dishwashing detergent on the oil stain, spread it with your hands or a toothbrush, and let it soak for about ten minutes before rinsing with warm water. If the stain is stubborn, you can repeat the process a few times or use soapy water for extra strength. Engine oil is oily, and dishwashing detergent can break down grease without damaging the material, but it's best to test a small area of the shoe first to check for color fading. If not cleaned promptly, engine oil can seep into the fibers and become harder to remove, so I usually recommend wearing protective shoes or old shoes when working. After treatment, let them dry in a ventilated area to restore a fresh condition.
Was this review help?
2
3
Share
Expand All
VonAddyson
10/11/25 8:41am
As someone who frequently deals with engine oil, I find WD-40 to be a powerful tool. Spray it on the stain and wait three minutes for it to dissolve the grease, then thoroughly wipe it clean with a damp cloth. If the results are unsatisfactory, lightly spray some engine cleaner. Engine oil is corrosive and should be dealt with promptly to avoid damaging leather or fabric. After cleaning, remember to rinse off any residue with water. Preventive measures include covering your shoes before car repairs or choosing stain-resistant shoe materials.
Was this review help?
20
4
Share
Expand All
MacKaleb
11/25/25 3:01am
I have a household tip: Mix baking soda and water into a paste, apply it to the oil stain, let it sit for 15 minutes, then scrub it clean. You can also gently wipe the oil stain with alcohol to dissolve it. Oil stains will spread and turn black if not cleaned, so it's best to deal with them promptly.
Was this review help?
6
0
Share
Expand All
More Forum Discussions

What phone number should I call to move a car?

If there is no phone number available to move the car, you can dial 114 directory assistance to find the contact information of the corresponding car owner. Contact the insurance company: You can call the insurance phone number displayed on the other vehicle's windshield, explain the specific situation to the insurance company, and they will contact the owner to come. Dial 122: 122 is the phone number designated by traffic management authorities to handle public traffic accident reports. Provide details such as the vehicle model, license plate number, and body color, and 122 will immediately contact the other driver. If the other driver violates regulations and refuses to cooperate in moving the vehicle, 122 will arrange for personnel to come directly to handle the situation and tow the car away.
6
3
Share

How to Use the Built-in Car Dash Cam?

The most basic built-in car dash cam comes with five buttons, each serving a different function. Before use, insert a memory card first. Press and hold the power button to turn it on or off. The mode button allows you to switch between recording, photo, or preview modes. In recording mode, the dash cam automatically starts recording—press the confirm button to pause. In photo mode, press the confirm button to take a photo. In preview mode, use the up/down buttons to select video or photo files, press OK to play or pause, and press the mode button to exit.
17
5
Share

Is the R8 the Only Supercar in BBA?

The Audi R8 is the only supercar in BBA (Benz, BMW, Audi). Other models like the BMW i8 and Mercedes-Benz SLS have long been discontinued, while others such as the Mercedes-AMG GT R only offer mid-range performance. Therefore, the Audi R8 is generally considered the only supercar in BBA. Audi R8 is Audi's first mass-produced mid-engine supercar, developed on the Lamborghini Gallardo platform. Its powerful V8 and V10 engines, full-time four-wheel-drive system, and Audi's all-aluminum space frame structure give the R8 outstanding dynamic performance. Performance-wise: The mid-mounted 420-horsepower V8 engine in the Audi R8, combined with quattro and fuel direct injection technology, delivers 309 kW of power. This enables the new Audi R8 to accelerate from 0 to 100 km/h in 4.6 seconds, with a maximum engine speed of 8,250 rpm, peak torque of 430 Nm, and a top speed of 301 km/h. Exterior design: The Audi R8 has a width of 1,900 mm, with length and height measuring 4,430 mm and 1,250 mm respectively. The 2,650 mm long wheelbase provides ample space for the two-seater cockpit. The R8's body sits close to the road, with muscular rear styling and a harmonious transition between the doors and side air vents. Behind the doors, between the wheel arches and roof, large air intakes supply sufficient airflow for the V8 engine's intake and cooling. The front grille of the Audi R8 features black plastic strips instead of the original silver chrome trim. Chassis: The Audi R8 employs an aluminum-magnesium space frame for high structural strength. Using vacuum pressure bonding as load-bearing elements, aluminum sheets are integrated into the frame, significantly reducing weight while enhancing frame strength and body rigidity. The cockpit fully reflects the R8's close ties to motorsport. This race-inspired cockpit integrates the driver's seat and instrument panel into a unified, independent control platform.
6
3
Share

Why Can Even Small Branches Scratch Car Paint?

Not all branches can scratch car paint. Here is the relevant information: 1. Branch thickness: If the branch is not very thick, it will usually bounce off when the car comes into contact with it. However, if the small branch is a broken one with sharp edges or is relatively sharp, combined with factors such as the angle of contact and the speed of the vehicle, it can scratch the paint. 2. Solutions: If the scratch is very shallow and only affects the surface paint, it can be treated with a compound. The method is to wipe in a straight line. After the scratch disappears, use a finer compound to wipe again and then apply wax. If the rust is not severe, you can first use very fine water sandpaper dipped in water to sand the rust spots in a straight line in the same direction (avoid sanding in random directions). After completely cleaning the area, apply a layer of primer. For new scratches, clean the area and apply primer directly. After the primer dries, use water sandpaper to smooth it out, then apply the original factory paint or use a touch-up pen to color over the primer.
1
3
Share

How to Remove Water Stains from the Windshield?

Professional neutral cleaners should be used, and avoid using laundry detergent or other highly corrosive cleaning agents. Long-term use of such products can corrode genuine leather, causing it to lose its original luster, become stiff, and prone to cracking. Additionally, chemical residues can pose health risks and cause secondary pollution. Choose the right tools for interior cleaning—avoid using stiff nylon brushes or nano-sponge brushes, as they can cause significant damage to leather seats despite their high efficiency. Cleaning method: To check the level of dirt on a dark-colored roof, simply wipe the surface gently with a clean, damp towel. If the white towel picks up brownish stains, it indicates that the roof is already quite dirty, as fibers tend to absorb stains easily.
16
5
Share

Which Gear to Use in Subject 2?

Use 1st gear in Subject 2. Here are some additional details: 1. Gear positions: Push forward for 1st, 3rd, and 5th gears, pull backward for 2nd, 4th, and reverse gears. Gear shifting should be practiced until it becomes a subconscious action. 2. Key points for gear shifting: Shift up one gear at a time, you can skip gears when downshifting, but never skip gears when upshifting. The gear should match the speed. To upshift, accelerate first; to downshift, decelerate first. Accurately grasp the timing of gear shifting, it is recommended to use engine RPM and vehicle speed as references to find the right moment. When upshifting from a low gear, gently press the accelerator pedal first. When the engine RPM reaches around 1800, shift quickly. Below 1500 RPM will cause lugging, and above 2000 RPM will cause jerking, both of which can damage the transmission.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.