What brands of window films are available at BMW 4S stores?

2 Answers
TuckerRose
07/23/25 8:02pm
There are 3M, LLumar, Aileisi, and Kanglixin. Precautions: After applying the car film, avoid rolling down the windows for three days, do not wash the car for three days, and for vehicles with sunroofs, do not open the sunroof while driving, especially at high speeds, for three days. Winter film application: Do not roll down the windows or wash the car for a week. The front and rear windshields take about a month to dry completely. During the day, the front windshield should face the sun. Most importantly, do not turn on the rear windshield heating lines for a month, as using the heating lines after applying the film in winter can cause bubbles near the heating lines, which are irreparable and may lead to unnecessary losses and troubles.
Was this review help?
11
1
Share
MacEmery
08/10/25 6:03pm
Last time when I accompanied my friend to the BMW 4S store for window tinting, the staff introduced several popular brands in detail, such as 3M and XPEL, which are all internationally renowned brands with excellent heat insulation effects and UV protection. I personally witnessed them using professional equipment during installation, being very meticulous to ensure the film fits the car windows without any edges lifting. Actually, the brands cooperating with the 4S store may vary by region and inventory, but they always guarantee original factory certification to avoid counterfeit products. Although the price is a bit higher than small shops outside, it comes with warranty services, allowing you to return for repairs if any issues arise. Personally, I recommend prioritizing these brands when choosing films, as driving safety comes first, and they prove more durable and hassle-free in the long run. Also, don't forget to ask about the warranty period of the film, usually ranging from one to three years, to avoid future worries.
Was this review help?
7
2
Share
Expand All
More Forum Discussions

What to Do When There's a Bad Smell from the Car's Cabin Air Filter?

Solutions for a bad smell from the car's cabin air filter: 1. Inspect and clean the evaporator; 2. Check the cabin air filter; 3. Use the air conditioning's internal and external circulation modes appropriately; 4. Clean the internal air conditioning ducts; 5. Check for any deceased small animals in the air conditioning system; 6. Minimize sources of odors inside the vehicle; 7. Turn off the air conditioning before parking and switch to natural ventilation to maintain relative dryness; 8. Avoid using acidic car perfumes; 9. Use tropical fruit-scented products to eliminate odors. Reasons for a bad smell from the car's cabin air filter: 1. The cabin air filter is excessively dirty; 2. The vehicle's evaporator box has not been cleaned for a long time.
13
4
Share

How to Remove Oil Film from the Windshield?

Methods to remove oil film from the windshield: 1. Use cleaning fluid; 2. Wipe with an eraser, car cleaning clay, or newspaper; 3. Sprinkle a little flour to absorb the oil before wiping; 4. Apply toothpaste to a toothbrush, scrub the windshield, and then wipe with a damp cloth. Reasons for oil film formation on the windshield: 1. Vehicle exhaust; 2. Oil smoke pollution; 3. Bird droppings, insect remains, or tree sap containing corrosive components; 4. Wiper blade aging. Windshield maintenance methods: 1. Apply a protective film to the windshield; 2. Avoid parking in areas with heavy oil smoke; 3. Stay away from kitchen exhaust vents; 4. Promptly clean off bird droppings, insects, etc.
13
3
Share

How many kilometers should the generator belt of Lavida be replaced?

The generator belt of Lavida should be replaced approximately every 60,000 kilometers. The generator belt is a primary belt in the car, connecting components such as the generator, air conditioning compressor, power steering pump, idler pulley, tensioner pulley, and crankshaft pulley. The power source of the generator belt is the crankshaft pulley, with the power provided by the rotation of the crankshaft. The Lavida is a sedan produced by Shanghai Volkswagen, with body dimensions of: length 4605 mm, width 1765 mm, height 1460 mm, a wheelbase of 2610 mm, a fuel tank capacity of 55 liters, and a trunk capacity of 472 liters. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113 hp and a maximum power of 83 kW.
20
1
Share

What are the reasons why the Buick Excelle cannot start?

Reasons why the Buick Excelle cannot start: 1. Battery depletion; 2. Faulty ignition coil or spark plug; 3. Fuel system malfunction; 4. Difficulty in cold engine start; 5. Intake system and ECU system failure. The Buick Excelle is a mid-size sedan produced by SAIC-GM, with body dimensions of: length 4468 mm, width 1765 mm, height 1469 mm, wheelbase 2611 mm, and fuel tank capacity of 40 liters. The Buick Excelle is equipped with a dual-injection engine, paired with a CVT intelligent continuously variable transmission, delivering a maximum power of 79 kW at 6200 rpm and a maximum torque of 133 Nm at 4000 rpm.
10
3
Share

What are the symptoms of a bad rear axle bearing in a car?

Car rear axle bearing failure symptoms include: 1. Abnormal noises while driving; 2. Vehicle body shaking during operation; 3. Unstable driving at high speeds. Methods to determine rear axle bearing failure: 1. Open the window to check if the sound comes from outside; 2. Increase speed then shift to neutral to observe noise during coasting; 3. Make a temporary stop to check if wheel hub temperature is normal; 4. Lift the vehicle with a hoist and manually rotate each wheel quickly. The rear axle refers to the rear drive shaft component in a car's powertrain system, consisting of two half-axles.
1
2
Share

What are the reasons for the Audi A4 engine malfunction indicator light being on?

The main reasons for the engine malfunction indicator light being on can be categorized into two situations: One is the presence of engine system faults such as: sensor issues, car maintenance problems, fuel quality problems, poor combustion of the air-fuel mixture, engine intake problems, turbocharging problems, exhaust problems, and issues with the anti-theft system. The other is the engine self-check during car startup, but in this case, the light will turn off after the self-check is completed. If the engine malfunction indicator light remains on for a long time, it is advisable to promptly visit a repair station for troubleshooting. Below is a detailed explanation of each type of fault: Sensor problems: Sensors include coolant temperature, crankshaft position, air flow, intake temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption occurs, the car's ECU cannot accurately obtain engine data, which will cause the engine malfunction indicator light to turn on. In such cases, it is recommended to seek professional inspection at a repair center to eliminate potential safety hazards in a timely manner. Maintenance problems: Poor engine maintenance is the most common cause of the engine malfunction light turning on. Vehicles have specific maintenance cycles, and if maintenance is not performed on schedule, coupled with poor driving habits, it will increase the burden on the engine, eventually causing the engine malfunction light to turn on to alert the owner of a fault. Fuel quality problems: The fuel quality here includes both fuel and engine oil. The fuel added to a car usually has a specific grade, and engine oil can be semi-synthetic or fully synthetic. Manufacturers generally recommend which grade of fuel and type of engine oil to use. If the owner does not follow these recommendations, it can lead to engine wear over time, causing the malfunction light to turn on. It is important to add fuel of the appropriate grade and the correct type of engine oil as specified for the vehicle. Poor combustion of the air-fuel mixture: Faults in the engine's spark plugs, ignition coils, fuel pump, or clogged fuel lines can lead to poor combustion of the air-fuel mixture. Poor combustion can result in engine carbon buildup or knocking issues, which will be detected by the engine's oxygen sensors and reported to the ECU, naturally causing the malfunction light to turn on as a warning. Intake problems: The engine requires air intake during combustion, and the air filter plays a crucial role in this process. If the car's air filter is dirty and not cleaned regularly, it can affect the car's air intake, potentially leading to blockages over time. In severe cases, this can cause the engine malfunction light to turn on. Turbocharging problems: Issues with the intake turbocharging lines or the turbocharger can also cause the engine malfunction light to turn on. The most common issue is damage to the turbocharger, accompanied by symptoms such as oil leaks, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Exhaust problems: Faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings can cause the engine malfunction light to turn on. The most common issue is a faulty catalytic converter. Using leaded gasoline, lead or silicon-based lubricant additives, physical damage to the catalytic converter, or faults in the engine fuel supply system can all contribute to catalytic converter failure. Anti-theft system: If the car's electronic anti-theft system malfunctions or if the anti-theft controller is incompatible with the engine electronic controller, the anti-theft system can prevent the engine from operating normally and cause the engine malfunction light to turn on. Solutions for when the engine malfunction light turns on: If the engine malfunction light is on and the car cannot start, this may be due to a faulty fuel pump or ignition components. It is recommended to call for assistance immediately. If the engine malfunction light is on and the vehicle can be driven but exhibits severe shaking or lack of acceleration, pull over and call for roadside assistance. If the engine malfunction light is on but there are no noticeable driving abnormalities, this may be due to a single sensor fault. In this case, you can continue driving temporarily, but it is best to drive at low to medium speeds and visit a repair shop to eliminate potential safety hazards.
16
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.