What brands of SUVs start with the letter G?

What is the appropriate tire pressure for a Corolla 1.2T?

The normal tire pressure range for a Corolla 1.2T is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard. The Corolla 1.2T's tire pressure monitoring system is indirect, utilizing the vehicle's ABS balance control. It only displays low pressure when there is a leak. To check the tire pressure, first prepare a tire pressure gauge, locate the original tire pressure label, press the gauge onto the tire valve to measure and read the value, and remember to replace the valve cap after measurement. Generally, a tire pressure above 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of over-inflation: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the vehicle during driving. Hazards of under-inflation: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement of tire parts, causing abnormal heat due to excessive rolling; weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a tire blowout. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), it is generally due to one of the following three reasons: Abnormal tire pressure: Typically, it alerts when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure is not reset promptly, the system continues to record the previous data, causing the indicator light to stay on. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged due to impact while driving, the tire pressure warning light will illuminate. For sensor damage, replacement with a new part is the only solution.

17

5

Share

Can You Continue Driving When the ABS Light Is On?

ABS fault light is on, it is recommended not to continue driving, because the ABS light indicates a malfunction in the vehicle's anti-lock braking system. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses significant safety risks. There are various states when the ABS light is on, with different causes and solutions for each state, as detailed below: State 1: ABS fault light stays on (most common). Cause 1: The ABS wheel speed sensor's sensing part is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently turns on, but turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. The ABS system's power supply voltage is too low, possibly due to poor terminal contact or grounding issues. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start until the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer malfunction. Solution: Loosen the grounding screw on the hydraulic valve body, then retighten it, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light turns on during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant difference between the rear and front wheel speeds; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently turns on. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: Start the engine, press the brake pedal, push the brake switch linkage down fully with a finger, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

8

5

Share

What is the tire pressure reset method for Hyundai ix25?

The tire pressure reset method for Hyundai ix25 is: 1. Press and hold the tire pressure setting button for 3 seconds to reset the tire pressure monitoring; 2. Visit a 4S shop and ask a professional technician to reset it. Taking the 2020 Hyundai ix25 as an example, its body dimensions are: length 4300mm, width 1790mm, height 1620mm, wheelbase 2610mm, and minimum ground clearance 154mm. The 2020 Hyundai ix25 is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 115ps and a maximum power of 84.4kw, paired with a 6-speed manual transmission.

13

3

Share

What is the function of valves?

Valves are specifically responsible for introducing air into the engine and expelling exhaust gases after combustion. Here are the relevant details: Types of valves: Engine valves are divided into intake valves and exhaust valves. The intake valve's function is to draw air into the engine to mix with fuel for combustion; the exhaust valve's role is to expel the burned exhaust gases and dissipate heat. Composition and performance of valves: A valve consists of a valve head and stem. The valve head operates at very high temperatures and endures gas pressure, valve spring forces, and inertial forces from transmission components. With poor lubrication and cooling conditions, valves must possess certain strength, stiffness, heat resistance, and wear resistance.

12

4

Share

How to Troubleshoot a Lit Engine Warning Light?

Methods to troubleshoot a lit engine warning light: 1. Disconnect the positive or negative terminal of the car battery; 2. Reconnect it after a few seconds. Reasons for a lit engine warning light: 1. Sensor issues; 2. Poor engine maintenance; 3. Substandard fuel quality; 4. Poor combustion of the air-fuel mixture; 5. Dirty car air filter; 6. Damaged catalytic converter or thermostat; 7. Engine misfire. An engine is a machine that converts other forms of energy into mechanical energy, determining the car's power, fuel efficiency, stability, and environmental performance. Car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines.

14

4

Share

Where is the emergency trunk release switch located on the Ford Edge?

Ford Edge's emergency trunk release switch is located at the trunk latch, concealed under a rectangular cover panel that needs to be pried open. Below are detailed instructions about the emergency trunk release: Usage method: In emergency situations, after accessing the trunk through the rear seats, use a key or screwdriver to pry open the cover panel, then rotate the switch to open the trunk from inside. Other types of trunk release switches: Common variants include pull-cord/ring type, covered type, and concealed type. Operation difficulty ranges from easy to difficult, with concealed types being the most aesthetically pleasing but requiring tools for operation as they cannot be activated manually.

16

0

Share

What brands of SUVs start with the letter G?

What is the appropriate tire pressure for a Corolla 1.2T?

Can You Continue Driving When the ABS Light Is On?

What is the tire pressure reset method for Hyundai ix25?

What is the function of valves?

How to Troubleshoot a Lit Engine Warning Light?

Where is the emergency trunk release switch located on the Ford Edge?

What Causes the Hissing Sound Like Air Leakage When the Car Air Conditioner is On?

What is Kontrol tire?

What happens if you fill a car designed for 92 octane with 95 octane gasoline?

Does idling with the air conditioning on affect the engine?