What brands are under Changan?

What Are the Differences Between Urban Roads and Highways?

Urban roads and highways have the following differences: 1. They belong to different administrative systems: urban roads fall under the transportation system, while highways are managed by the construction and housing system. 2. Their typical working environments differ: urban roads are usually located in mountainous or rural areas, whereas highways are commonly found in urban or market areas. Additional information on urban roads and highways is as follows: 1. Urban road density refers to the total length of roads per unit area within an administrative region. Medium-sized cities have a road density of 5.2-6.6 km, while large cities with populations over 2 million have a density of 5.4-7.1 km. 2. Expressways are designed to accommodate an annual average daily traffic (AADT) of over 25,000 vehicles. They hold significant political and economic importance, are exclusively for high-speed, continuous, and segregated vehicle traffic, feature full-grade interchanges and controlled access, and primarily serve long-distance transportation. 3. Class I highways can handle an AADT of 5,000-25,000 vehicles. They connect major political and economic centers, provide access to key industrial zones, allow for rapid segregated vehicle movement, and feature partial access control and grade-separated interchanges. 4. Class II highways can accommodate an AADT of 2,000-5,000 vehicles (converted to medium-duty trucks). They link political and economic hubs or large industrial zones and serve as heavily trafficked suburban roads. They typically have four lanes (two in each direction). 5. Class III highways can handle an AADT of fewer than 2,000 vehicles (converted to medium-duty trucks). They serve as general arterial roads connecting counties or linking counties to cities. These roads usually have two lanes, with a width of 8.5 meters in flat areas and 7.5 meters in hilly regions. 6. Class IV highways can accommodate an AADT of fewer than 200 vehicles (converted to medium-duty trucks). They function as feeder roads connecting counties to towns or villages. For example, the old Bingchacha Road in the new Yunnan-Tibet corridor is 3-4.5 meters wide, has a gravel base, and is considered a simple road.

9

0

Share

Can vehicles be inspected in other regions?

Except for large passenger buses and school buses, which cannot be inspected in other regions, all other vehicles can undergo annual inspections in different locations. Currently, the traffic management authorities have fully implemented cross-provincial inspection services for small cars, trucks, and medium-sized buses. Applicants can directly conduct inspections in provinces other than where the vehicle is registered and obtain the inspection qualification mark without needing to apply for an inspection authorization. Large passenger buses and school buses must return to the vehicle's registration location for inspection. Annual inspection time requirements: Small and micro non-operational passenger vehicles are exempt from inspection for the first 6 years. After 6 years but less than 10 years, they must be inspected every two years; after 10 years but less than 15 years, they must be inspected annually; after 15 years, they must be inspected every 6 months. Operational passenger vehicles must be inspected annually within the first 5 years; after 5 years, they must be inspected every 6 months. Trucks and large and medium non-operational passenger vehicles must be inspected annually within the first 10 years; after 10 years, they must be inspected every 6 months. Imported vehicles, like other vehicle types, can undergo regular inspections at any inspection station. Annual inspection precautions: Vehicles that fail the annual inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not undergo the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer registration. Vehicles that meet the scrapping conditions or exceed the prescribed service life will not be inspected, and their license plates will be revoked, their files canceled, and they will be scrapped.

1

4

Share

What Does Driving School Insurance Fee Mean?

Insurance fee mainly refers to the pass insurance fee for exams. Generally, the insurance fee is paid for Subject 2 and Subject 3, with Subject 2 typically costing between 1,000 and 1,500 yuan. Additional Information: The content of the motor vehicle driver's examination is divided into the Road Traffic Safety Laws, Regulations, and Related Knowledge Examination (also known as the "Theory Test", hereinafter referred to as "Subject 1"), the Field Driving Skills Examination (commonly known as the "Parking Test", hereinafter referred to as "Subject 2"), and the Road Driving Skills and Safe & Civilized Driving Knowledge Examination (commonly known as the "Road Test", hereinafter referred to as "Subject 3"). 1. Subject 1: Road Traffic Safety Laws, Regulations, and Related Knowledge Examination (Subject 1) – Written test, computer-based, with a full score of 100. A score of 90 or above is considered a pass (including 90). 2. Subject 2: Field Driving Skills Examination (Subject 2) – Conducted on-site with an actual vehicle. Results are either pass or fail. The five mandatory test items, conducted in sequence, are: reversing into a parking space, parallel parking, S-curve driving, right-angle turning, and hill start and stop. The full score is 100, with a score of 80 or above considered a pass (including 80). 3. Subject 3: Road Driving Skills Examination (Subject 3) – Conducted on a road or simulated field with an actual vehicle. The full score is 100. For large buses, a score of 90 or above is required to pass; for large trucks, 80 or above; and for other vehicle types, 70 or above. 4. Subject 4: Safe & Civilized Driving Related Knowledge (Subject 4) – Written test, with a full score of 100. A score of 90 or above is considered a pass (including 90).

8

4

Share

Why is the engine warning light on in the Wuling mini truck?

There are mainly 7 reasons for the engine warning light being on in the Wuling Zhiguang mini truck: Sensor malfunction: The sensors mentioned here include coolant temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the vehicle's ECU cannot accurately obtain engine data, which will cause the engine warning light to illuminate. Fuel quality issues: If fuel and engine oil are not added according to the manufacturer's requirements, it may cause engine wear and trigger the warning light. Poor fuel mixture combustion: Poor combustion of the air-fuel mixture can lead to engine carbon deposits or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as an alert. Spark plug failure, ignition coil failure, fuel pump failure, and fuel line blockage can all cause poor combustion of the engine's air-fuel mixture. Turbocharging issues: The intake turbocharging pipeline and turbocharger can also cause the engine warning light to illuminate. The most common issue is turbocharger damage, accompanied by symptoms such as oil leaks, high oil consumption, reduced power, metallic noises, and blue or black smoke from the exhaust. Intake issues: If there is a problem with the vehicle's air intake, it may cause engine pipeline blockage, and in severe cases, trigger the engine warning light. A dirty air filter that is not cleaned regularly can lead to intake problems. Exhaust issues: Exhaust system faults can also cause the engine warning light to illuminate. Common causes include rear oxygen sensor failure, three-way catalytic converter failure, exhaust camshaft and bearing failure, with the three-way catalytic converter being the most frequent issue. Using leaded gasoline, lead or silicon-containing lubricant additives, physical damage to the catalytic converter, or fuel system malfunctions can easily cause three-way catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system malfunctions, or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally while illuminating the warning light. If the engine warning light is on, follow these steps: First, check if the engine is running normally, looking for symptoms like shaking or black smoke. If present, avoid restarting the engine. Particularly, never restart if the red warning light is on. If the engine can start, turn it off and wait 5-10 minutes. Without pressing the brake, press the start button once or turn the key halfway to the ON position without depressing the clutch. The vehicle will enter self-check mode after powering on. Wait 5-10 seconds to see if the warning light turns off. If the warning light remains on, visit a service center as soon as possible. Technicians can use a portable diagnostic tool to read trouble codes, identify the issue, and perform targeted repairs.

10

1

Share

Where is the Best Location for an Intercooler?

Different types of intercoolers are placed in the following locations: 1. Front-mounted intercooler: Usually installed on the inner side of the front bumper, slightly below the condenser. 2. Top-mounted intercooler: Generally installed on the upper part of the engine, near the intake manifold. The engine hood is equipped with an air intake to facilitate cooling of the intercooler. It is typically installed on the inner left or right side of the front bumper.

14

4

Share

What car brand has an S-shaped logo?

An S-shaped logo represents Suzuki. Here is some information about Suzuki: 1. Introduction: Suzuki is a Japanese automobile manufacturer, primarily producing mini vehicles. General Motors holds a 10% stake in Suzuki. 2. Logo: The 'S' in the Suzuki logo stands for the first letter of 'SUZUKI', conveying a sense of boundless energy and symbolizing the unlimited development potential of Suzuki Motor Corporation. Suzuki provides high-quality products to customers worldwide and offers excellent service to users of Suzuki products.

14

0

Share

What brands are under Changan?

What Are the Differences Between Urban Roads and Highways?

Can vehicles be inspected in other regions?

What Does Driving School Insurance Fee Mean?

Why is the engine warning light on in the Wuling mini truck?

Where is the Best Location for an Intercooler?

What car brand has an S-shaped logo?

Will speeding on an off-ramp result in penalty points?

What details should be paid attention to in the Subject 3 driving test?

How Many Months Must a Full Tank of Gasoline Be Used Up Within at Most?

Where to Find the Date on Michelin Tires?