What brand was the first batch of domestically produced cars in China?

1 Answers
RoseLynn
07/29/25 1:33am
China's first batch of domestically produced cars was the Jiefang CA10 heavy-duty truck. Here are some additional details: 1. Origin of the Jiefang CA10 heavy-duty truck: This batch of vehicles was manufactured in July 1956 at the First Automobile Works in Changchun, Jilin Province, showcasing China's capability in independent automobile manufacturing. 2. Birth of the Jiefang CA10 heavy-duty truck: It marked the end of the era when China was considered incapable of producing automobiles. The model was based on the prototype of the ZIS-150 4-ton truck from Stalin Automobile Plant. The name "Jiefang" (meaning "liberation") was personally chosen by Chairman Mao Zedong, and the "CA" designation was later used in subsequent FAW product models.
Was this review help?
18
1
Share
More Forum Discussions

Can You Shift Gears Without Pressing the Clutch?

You can shift gears without pressing the clutch. Modern car transmissions are equipped with synchronizers, which help align the speeds of the driving gear and the driven gear, making it easier to engage the gear. Drivers can feel the point where the speeds match, allowing them to shift without using the clutch. The clutch is part of the drivetrain and is located between the engine and the transmission. The clutch pressure plate is fixed to the engine flywheel, and beneath it lies the clutch friction disc. The friction disc has splines in the center that secure a driveshaft, which serves as the transmission's input shaft. Over time and with increased mileage, the clutch disc wears out and requires periodic replacement.
15
5
Share

What warning light appears when a sedan runs out of engine oil?

A red oil can indicator light will appear when a sedan runs out of engine oil. When this occurs, promptly add engine oil. There are many reasons why the oil warning light may illuminate. The most common cause is insufficient engine oil. It could also be due to excessively high engine temperature caused by prolonged vehicle operation, which rapidly increases engine temperature and causes excessive thinning of the internal engine oil. Additionally, you should inspect whether any oil system components are damaged. When parts in the oil system sustain certain damage, it will affect normal oil circulation and may even prevent the vehicle from operating properly in severe cases. Furthermore, poor oil quality can also trigger the oil warning light. The quality of engine oil primarily depends on its viscosity and luster. If the oil quality is poor, excessive impurities will appear during use, affecting normal vehicle operation.
10
3
Share

What is the chassis code for the BMW 5 Series?

The chassis code for the BMW 5 Series is G30, while the long-wheelbase version is designated as G38. The BMW 5 Series is equipped with three types of engines: a low-power version of the 2.0-liter turbocharged engine, a high-power version of the 2.0-liter turbocharged engine, and a 3.0-liter inline-six turbocharged engine. The low-power 2.0-liter turbocharged engine has the code B48B20C, delivering a maximum power of 135 kW and a maximum torque of 290 Nm. The high-power 2.0-liter turbocharged engine is coded B48B20D, producing a maximum power of 185 kW and a maximum torque of 350 Nm. The 3.0-liter inline-six turbocharged engine, coded B58B30A, offers a maximum power of 250 kW and a maximum torque of 450 Nm.
18
4
Share

What brand are the original tires for the 2013 Teana?

The original tires for the Teana are Bridgestone tires. Below are specific details about the tires: 1. Functions of tires: Tires support the entire weight of the vehicle, bear the load of the car, transmit traction and braking torque, ensure the adhesion between the wheels and the road, reduce and absorb vibrations and impact forces during driving, prevent severe vibrations and early damage to car components, adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring safety, handling stability, comfort, and fuel economy. 2. Tire maintenance methods: Tire maintenance methods include regularly cleaning stones from tire treads, minimizing exposure to direct sunlight, frequently checking tire pressure, paying attention to suspension maintenance, regularly inspecting front wheel alignment, and being mindful of driving habits.
12
1
Share

Brief Introduction to the Working Principle of Air Flow Meter

Air flow meter working principle is that under the condition of constant voltage of the air flow meter, the resistance of the air flow meter is changed by changing the intake air volume, thereby changing the current size and transmitting it to the car ECU. The air flow sensor, also known as the air flow meter, is one of the important sensors of the EFI engine. It converts the inhaled air flow into an electrical signal and sends it to the electronic control unit ECU, as one of the basic signals to determine the fuel injection, and is the sensor to measure the air flow inhaled by the engine. With the microcomputer used to control the fuel injection, several other types of air flow sensors have appeared, such as the valve-type air flow sensor and the Karman vortex air flow sensor.
20
2
Share

Can I apply for ETC if the vehicle registration certificate is not under my name?

It is possible to apply for ETC even if the vehicle registration certificate is not under your name. According to the "Implementation Plan for Accelerating the Application of Electronic Non-stop Toll Collection on Highways" issued by the Ministry of Transport, you need to bring the original valid ID card of the vehicle owner, the original and a copy of the vehicle registration certificate (the page with the most recent annual inspection stamp). If applying on behalf of someone else, you also need to provide the original valid ID card of the agent. If applying for ETC through major bank branches, you will also need to prepare a debit or credit card from the corresponding bank. Some banks only support ETC binding with credit cards, while others may require freezing a portion of the amount as a deposit when binding with a debit card. ETC Deduction Principles: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with the bank, the vehicle can pass through the toll station without stopping to pay the toll. All of this is based on the principle of "pass first, deduct later." Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, as vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, thereby minimizing pollution; Cost-saving: Reduces vehicle wear and tear, lowers fuel consumption, and users can enjoy a 5% discount on toll fees; Improved efficiency: ETC lanes can theoretically increase vehicle passing efficiency by 2-3 times, making traditional ETC faster, more advanced, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council explicitly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, intercity transportation smart cards will be widely used in key city clusters, and the proportion of vehicles equipped with ETC will significantly increase." The plan also sets a target of "achieving a 50% ETC usage rate for road passenger vehicles by 2020." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, future efforts will also promote ETC usage for trucks and explore deeper integration of ETC systems with vehicle-to-vehicle communication, vehicle-to-infrastructure coordination, and other smart transportation developments. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC. ETC Usage Notes: The ETC transaction sensing range is 8 meters. If the vehicle in front stops, maintain a distance of more than 10 meters to prevent automatic sensing and payment for the vehicle in front, in case its ETC device is faulty or nonexistent. The recognized speed for ETC lane passage is 20 km/h. Driving too fast may result in failure to read the vehicle's device information and subsequent deduction failure. Unauthorized removal or movement of the OBU device, or if the ETC electronic tag falls off or becomes loose, may render the tag invalid. In such cases, you can take it to the bank where the ETC card was issued or the highway service office for inspection. If the issue is not due to human error, reactivation may suffice. When using a debit card bound to ETC, insufficient balance may cause deduction failure. Follow the guidance of on-site staff to use the manual MTC lane and pay with cash or card. Poor sensing due to overly thick windshield glass, especially for vehicles that have had windshield replacements after accidents or modifications, should be noted.
15
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.