What brand of transmission is used in the VV7?

How long does it take to fully charge the car battery after starting the engine?

Generally, driving on the highway for more than an hour can fully charge the car battery. Here is some relevant knowledge about car battery charging: 1. Under normal circumstances, the battery does not require maintenance unless the car is not used for a long time. In such cases, the negative terminal should be disconnected, and the battery should be charged every two months. During normal use, it's important to note that frequently driving short distances of just a few kilometers can significantly damage the battery. It is recommended to take longer trips on weekends with family to allow the battery to fully charge once. 2. Regularly driving on the highway has many benefits, including removing carbon deposits from the vehicle and fully charging the battery. Generally, driving on the highway for more than an hour can fully charge the car battery, keeping it in optimal condition. If the car is not used for an extended period, such as twenty days or a month, the battery cable should be disconnected, or the vehicle should be started and driven for several dozen kilometers every two weeks to ensure the battery remains functional.

12

4

Share

What are the differences between 1.6L and 1.8L engine displacements?

The differences between 1.6L and 1.8L engine displacements are as follows: different engines, different maximum torque, and different maximum horsepower. Below are the relevant details about the differences between 1.6L and 1.8L engine displacements: 1. Different engines: (1) 1.6L displacement: 1.6L 74kW naturally aspirated engine. (2) 1.8L displacement: 1.8L 110kW naturally aspirated engine. 2. Different maximum torque: (1) 1.6L displacement: maximum torque (N.m) 145/3800. (2) 1.8L displacement: maximum torque (N.m) 220/2000. 3. Different maximum horsepower: (1) 1.6L displacement: 120 horsepower. (2) 1.8L displacement: 150 horsepower.

16

0

Share

Why are taxis in Japan so expensive?

The high cost of taxis in Japan can be attributed to several factors, including low demand. Here are the main reasons why taxis are expensive in Japan: 1. Low demand: Japan has a small land area and a large population, especially in densely populated cities like Tokyo, where rail transportation is highly developed. The density of rail lines in Tokyo is approximately 1.5 times that of New York and 7 times that of Hong Kong. As a result, people prefer the convenience and punctuality of rail transportation for their daily commute. The extensive and efficient train system makes taxis less necessary for the general public. 2. High costs: Labor expenses, fuel costs, vehicle prices, inspection fees, maintenance costs, taxes, and insurance all contribute to the high cost of taking a taxi in Japan.

13

3

Share

Where is the car horn generally located?

Car horns are generally installed inside the front bumper of the vehicle, and for some car models, the front bumper must be removed for replacement. Below is a detailed introduction on the correct use of car horns: 1. Narrow roads: On narrow roads such as country lanes or mountain roads with only two lanes in both directions, we often need to borrow the opposite lane to overtake. In such cases, it is recommended to honk the horn before overtaking to alert the vehicle in front and avoid accidents. 2. Overtaking on curves: Honking the horn before entering a curve can remind the opposite lane not to drive over the line illegally. If you receive a horn signal from the opposite direction before a curve, it is recommended to respond with a honk. This way, both parties can be aware of oncoming vehicles, ensuring a clear understanding and driving safely within their own lanes to guarantee driving safety.

9

4

Share

How to Adjust the Carburetor Needle for Fuel Efficiency?

How to adjust the carburetor needle of a motorcycle is an important issue when using a motorcycle. Below are specific methods on how to adjust the carburetor needle for fuel efficiency: 1. Lower the fuel level in the float chamber slightly: The fuel in the float chamber enters the carburetor venturi through the main jet and mixes with air to form a combustible mixture. Moderately lowering the fuel level reduces the pressure difference. 2. Adjust the main jet: The main jet comes in two types—fixed and adjustable with a needle. For a fixed main jet, you can wrap one or two thin copper wires inside the jet to reduce fuel flow. For an adjustable type, first screw the needle all the way in, then turn it counterclockwise about one and a half turns. The goal is to moderately reduce the mixture concentration while ensuring stable engine operation. The vehicle should not experience hesitation during acceleration or carburetor backfire. Multiple adjustments may be needed to reach the optimal level. 3. Avoid fully depressing the throttle: Generally, avoid pressing the throttle all the way down to save fuel. Keeping the throttle opening within two-thirds of its range results in the leanest and most fuel-efficient mixture. 4. Adjust the screw on the right side of the carburetor: This screw can lower the idle speed (adjusted counterclockwise) to achieve fuel savings.

3

2

Share

Is Light Cycle Oil Classified as Fuel Oil?

Light cycle oil does not belong to the category of fuel oil. Light cycle oil is classified as a refined oil product, which includes gasoline, kerosene, diesel, and other alternative fuels such as ethanol gasoline and biodiesel that meet national product quality standards and serve the same purposes. The light cycle oil in catalytic processes refers to light diesel. Generally, light cycle oil refers to hydrocarbon mixtures with boiling point ranges between approximately 50 to 350 degrees Celsius. Below is an introduction to light cycle oil: 1. Composition of light cycle oil: It is developed from refined high-viscosity-index mineral base oils and additives for oxidation resistance, rust prevention, and wear reduction. 2. Functions and advantages of light cycle oil: It exhibits excellent thermal stability and outstanding rust resistance, contributing to extended bearing life. Another advantage is its ability to quickly separate water and expel gases.

8

5

Share

What brand of transmission is used in the VV7?

How long does it take to fully charge the car battery after starting the engine?

What are the differences between 1.6L and 1.8L engine displacements?

Why are taxis in Japan so expensive?

Where is the car horn generally located?

How to Adjust the Carburetor Needle for Fuel Efficiency?

Is Light Cycle Oil Classified as Fuel Oil?

How to Deal with Bulging Car Tires?

Can a Car with an Outstanding Mortgage Be Sold?

What is the age limit for applying for a driver's license?

What Happens When Transmission Fluid Gets Dirty?