What brand of transmission fluid does Cadillac use?

3 Answers
ManuelFitz
07/29/25 4:03am
"The transmission fluid used in this vehicle is from the Mobil brand. Cadillac transmission fluid replacement interval: Cadillac transmission fluid should be replaced every 2 years or 40,000 kilometers. If the transmission fluid is used for too long without replacement, it may lead to reduced power, rough and unsteady gear shifting, and abnormal noises from the transmission. Once these symptoms appear, the transmission condition should be checked and the fluid replaced promptly. Transmission maintenance methods: Regularly check whether the automatic transmission fluid level is normal. To check the transmission fluid, it needs to be preheated to about 50 degrees Celsius, then shift the gear lever through each position for 2 seconds before placing it in park. At this time, the normal fluid level on the dipstick should be between the maximum and minimum lines. If it is insufficient, add the same quality fluid promptly. Follow the recommended transmission fluid replacement interval. The correct method for changing transmission fluid currently is dynamic fluid replacement, using specialized transmission cleaning equipment."
Was this review help?
16
4
Share
Deanna
08/12/25 3:45pm
When I drove my Cadillac CTS, I used Dexron VI transmission fluid, which is the brand recommended by GM itself. Compatible products from brands like ACDelco or Valvoline are also available. It’s not always necessary to stick with the original brand—the key is to ensure the fluid specifications match your vehicle’s model manual requirements. I found that it made shifting smoother and extended the lifespan. If you have a newer model like the XT5, it might support the latest specifications. I must emphasize that regular fluid changes are crucial—typically every 40,000 to 60,000 kilometers for inspection or replacement. Don’t cheap out and buy off-brand products, as it can lead to transmission wear and issues like jerking or leaks. During maintenance, ask the technician to check the fluid quality with a diagnostic tool to ensure driving safety. My personal advice is to first check the owner’s manual for the exact specifications before choosing a brand.
Was this review help?
17
1
Share
Expand All
KeeganLee
10/02/25 8:28am
As someone who frequently repairs Cadillacs, I recommend using brands compatible with Dexron VI, such as Mobil 1 and Castrol. These major brands are quite reliable. In actual maintenance, we often encounter failures caused by the indiscriminate use of cheap oils, such as poor oil quality leading to transmission overheating or noise. You need to consider whether the fluid viscosity and high-temperature stability match your vehicle model. I suggest changing it approximately every 50,000 kilometers, especially if you drive frequently. Checking the oil level is also part of routine maintenance to prevent damage from insufficient oil. Don't overlook the small details—ensure the oil passages are cleaned during oil changes to extend the transmission's lifespan and save hassle.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What type of engine oil does the Haval M6 use?

Haval M6 uses 5W30 engine oil, which has outstanding low-temperature resistance and good fluidity, enabling the engine to operate more efficiently. In 5W30 engine oil, the number 5 represents the oil's viscosity—the smaller the number, the lower the viscosity, resulting in better fluidity. The number 30 indicates the oil's high-temperature resistance—the larger the number, the better its high-temperature performance. The Haval M6 is a compact SUV under the Haval brand, with dimensions of 4649 mm in length, 1830 mm in width, and 1705 mm in height, and a wheelbase of 2680 mm. In terms of exterior design, the vehicle adopts a new design language, featuring a star-studded grille, integrated projector headlights for low and high beams, a floating roof complemented by unique boomerang chrome strips, a roof-mounted luggage rack, and dragon-wing side character lines, giving the body a more streamlined appearance.
2
3
Share

What transmission is used in the Changan Oushang X7?

Changan transmission is the one used in the Oushang X7. Changan (China Changan Automobile Group Co., Ltd.), formerly known as China South Industries Automobile Corporation, was established in December 2005 and is headquartered in Beijing. The Changan Oushang X7 is equipped with two types of transmissions: a 7-speed dual-clutch transmission and a 6-speed manual transmission. The dual-clutch transmission (DCT) differs from conventional automatic transmission systems. Based on a manual transmission yet not an automatic one, it combines the flexibility of a manual transmission with the comfort of an automatic transmission while providing uninterrupted power output. A manual transmission is a gear-shifting device that alters the engine's speed and torque transmitted to the drive wheels, enabling the vehicle to achieve different traction forces and speeds under various conditions such as starting, climbing hills, turning, and accelerating. For the Changan Oushang X7's transmission, the following points should be noted during daily use: Do not delay changing the transmission oil for an extended period. Prolonged failure to change the transmission oil can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While driving manual transmission models, many experienced drivers may coast in neutral, but for automatic transmission models, this can cause overheating and a noticeable jolt when shifting back into D (Drive) mode. Never shift into D or R (Reverse) before the vehicle comes to a complete stop. Some drivers, aiming for a 'smooth' operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and, over time, lead to gear grinding and other failures. Avoid frequently climbing steep slopes in D mode. Automatic transmission vehicles can overheat under high loads or shift prematurely, resulting in insufficient power for climbing. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, it should be transported using a flatbed tow truck with the transmission in N (Neutral) mode. Avoid using tow ropes or directly towing the vehicle with another car.
5
0
Share

What are the reasons for insufficient power in the Besturn B50?

Here are the specific reasons for insufficient power in the Besturn B50: 1. Engine carbon deposits: Commonly, spark plug carbon deposits can cause poor ignition, leading to incomplete fuel combustion, increased fuel consumption, and consequently insufficient power. 2. Engine fuel system failure: Such as clogged fuel injectors, fuel pipe leaks, or aging fuel pumps causing a drop in power, or a clogged oil filter can also result in weak vehicle performance. 3. Blocked intake or exhaust system: If the air filter or the three-way catalytic converter in the exhaust pipe is clogged, it can obstruct the vehicle's intake and exhaust, making the engine 'breathe' poorly, which manifests as weak vehicle performance. 4. Single or multiple cylinder misfire: If a cylinder in a three-cylinder engine misfires, it can severely affect the engine's performance, causing intense and unstable shaking. Similarly, a misfire in a four-cylinder engine can cause the same issue, though the power drop is less severe compared to a three-cylinder engine.
11
2
Share

What is the function of the secondary air pump in the Besturn B50?

The secondary air pump in the Besturn B50 serves to inject air into the exhaust manifold after a cold engine start, thereby reducing emissions. Below is a detailed introduction to the secondary air system: 1. Function: The secondary air system is one of the external purification devices designed to reduce tailpipe emissions. It introduces additional air into the exhaust gases to increase oxygen content, allowing unburned harmful substances like carbon monoxide (CO) and hydrocarbons (HC) to undergo further combustion under high-temperature conditions. 2. Working Principle: When the engine is running, the crankshaft drives the air pump via a belt, generating a high-volume, low-pressure airflow that passes through a hose to a diverter valve. Under normal conditions, the diverter valve opens, directing the airflow through a one-way valve into the air injection manifold. The air injection manifold then sprays the airflow into the engine's exhaust ports or exhaust manifold, where it reacts with HC and CO in the exhaust gases, converting them further into CO2 and water vapor to minimize exhaust pollution.
14
0
Share

Why is the fuel tank indicator flashing?

Generally, this issue is caused by a faulty fuel level sender contact. It is recommended to replace the fuel level sender. Here is the relevant information: Fuel Gauge: Drivers can determine whether refueling is needed based on the fuel gauge's display of the remaining fuel in the tank. If refueling is required, the fuel gauge can also accurately display the amount of fuel added each time. The fuel gauge does more than just serve as a scale; it can also more precisely and advancedly display the car's fuel consumption per kilometer, the size of the car's fuel consumption, and whether fuel is being used efficiently. The fuel gauge will also alert the driver to the remaining fuel's range. Precautions: If the driver does not refuel in time, once the fuel storage falls below a certain value, the car's fuel gauge will activate a fuel warning function. In addition, the car's fuel gauge can even display the odometer and store real-time measurement data for three months for data management.
8
4
Share

Why does the Mercedes-Benz auto start-stop always show a yellow light?

If the auto start-stop of a Mercedes-Benz always shows a yellow light, it indicates insufficient battery charge, and the battery needs to be recharged. Here are the specific details about the auto start-stop function: 1. Auto Start-Stop Button: The auto start-stop button is located to the left of the cigarette lighter, with an icon of a circle containing the letter 'A' and 'OFF' below. Simply press the button to turn off the auto start-stop. 2. Default Activation: The auto start-stop is activated by default. Every time the vehicle is restarted, the auto start-stop will turn on. This button cannot permanently disable the function; you need to press it each time you start the vehicle to turn off the auto start-stop. 3. Function Purpose: The engine auto start-stop automatically shuts off the engine when the vehicle comes to a temporary stop (e.g., at a red light). When it's time to move again, the system automatically restarts the engine. This helps reduce unnecessary fuel consumption, lower emissions, and improve fuel economy.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.