What brand of tires should be used for the Axela?

2 Answers
DiAlina
08/27/25 7:13am
The Axela uses Goodyear tires, which to some extent balance comfort and wear resistance. There are two tire specifications available: 205/60R16 and 215/45R18. Relevant information is as follows: 1. Tires: Car tires are one of the important components of a vehicle, directly in contact with the road surface, working together with the car suspension to mitigate impacts during driving, ensuring good ride comfort and smooth driving. 2. Dimensions: The Axela is a model under Changan Mazda, with body dimensions of 4582mm in length, 1795mm in width, and 1458mm in height, and a wheelbase of 2700mm.
Was this review help?
13
5
Share
LaBrantley
09/09/25 6:02am
Many Mazda Axela owners often ask me this question, so I’ll share my own tire replacement experience. The Michelin Primacy 4 is usually recommended—it offers excellent noise reduction, making it very practical for daily commutes, especially in urban driving with minimal vibration and good fuel efficiency. The original tires might be Bridgestone Turanza EQ, but Michelin is moderately priced and lasts three to four years without issues. If you’re on a tight budget, considering domestic brands like Maxxis is also an option, but make sure the size matches—don’t randomly pick sizes. When replacing tires, it’s best to visit a professional shop for a wheel alignment; don’t just change brands and risk affecting handling. A reminder to everyone: choose based on your driving habits—if you frequently drive on highways, prioritize durability checks.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What is Synthetic Oil?

Synthetic oil is a type of engine oil artificially synthesized through chemical methods by humans. Depending on its intended use, the composition of synthetic oil can be adjusted accordingly. Below is an introduction to synthetic oil: Semi-synthetic oil: This refers to lubricants blended from three types of base oils internationally. It is a technological product derived from mineral oil through hydro-cracking and purification processes. The purity of semi-synthetic oil is very close to that of fully synthetic oil, but its cost is slightly higher than mineral oil, making it an ideal transitional product from mineral oil to synthetic oil. Fully synthetic oil: This is a lubricant composed of ethylene and propylene dispersed from natural gas or crude oil-derived gas, which undergoes complex chemical reactions such as polymerization and catalysis to refine into a high-molecular compound lubricating fluid.
4
4
Share

How to Deal with the Flashing Yellow Start-Stop Light Malfunction?

Excessive carbon deposits in the engine is a major cause, primarily due to the use of inappropriate fuel. As an internal control unit in the vehicle, the oxygen sensor primarily monitors the air-fuel ratio of the engine. During vehicle operation, the oil filter, air filter, and fuel filter must be replaced regularly.
3
1
Share

What to Do When the Prado 2700 Lacks Power?

Engine ignition timing being too late can easily cause issues such as exhaust backfiring, engine overheating, high water temperature, and slow acceleration when stepping on the gas. It manifests as weak acceleration when the vehicle is moving and slow response when stepping on the gas. Insufficient fuel pressure, clogged fuel system, or damaged fuel injectors.
19
1
Share

How to turn off the SOS button on the car roof?

First, check whether the control unit of the car has been installed on other cars. If not, disconnect the emergency call control unit and install the backup battery after 10 minutes. Turn on the car ignition switch for 20 minutes. After the car is ignited, check whether the SOS fault has been successfully resolved.
20
4
Share

How to Coordinate the Clutch and Brake When Starting?

First, engage the clutch to the semi-engaged state, then hold the clutch steady and maintain the direction. When reaching the stopping point, press the clutch while simultaneously applying the brake. It is not recommended to maintain the semi-engaged clutch while braking, as improper control of the clutch engagement level can easily cause the engine to stall when braking. Therefore, it is advisable to press the clutch first and then the brake. With practice, you can also press both simultaneously.
11
2
Share

Is it normal for a new car's paint to have raised small paint dots?

It is not normal for a new car's paint to have raised small paint dots. Below are the reasons why a new car's paint may have raised small paint dots: Damage during factory production: If the new car's paint has raised sand-like particles, it is highly likely that the car already had issues when it left the factory or that the paint was damaged during transportation. In this case, you should go to the 4S store to negotiate a solution. If the issue is not severe, simply polishing the car may suffice. However, if it is a product quality issue, the seller should propose a solution, including possibly replacing the car with a new one of the same model. If negotiations fail, you can protect your rights through legal means. Surface contaminated with harmful substances: It may also be because the surface is contaminated with many harmful substances, causing the paint to have raised sand-like particles. In this case, you should use a clay bar for removal. First, rinse the dirt on the car body with water or car wash soap. Then, use a clay bar soaked in warm water, gently wiping the paint while spraying water. Be careful not to apply too much pressure to avoid scratching the paint with the tiny particles. Stop the operation once the surface becomes smooth again.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.