What brand of tires does the Tiguan use?

1 Answers
JaxsonMarie
07/30/25 1:21am
Tiguan's preferred tire is the Dynapro-HL2-RA35. In terms of comfort and quietness, the Dynapro-HL2-RA35 utilizes various cutting-edge technologies such as noise prediction analysis technology, visual noise technology, rolling analysis technology, and vibration control technology, effectively reducing noise and improving driving comfort. Below is an introduction to the Dynapro-HL2-RA35 and other corresponding brand tires: 1. During actual driving conditions at 60km/h with the air conditioning on, the noise level was tested at 62dB. While this may not match some tires marketed for their quietness, a horizontal comparison shows that the noise value is relatively low. Of course, such performance is also attributed to the additional panel padding and soundproofing materials in the Tiguan's interior. 2. The Michelin Pilot-Primacy offers excellent handling, wet traction, and low noise, providing drivers with an ideal combination of high performance and comfort. Its continuous central ribs enhance stability and directional feel during driving. 3. The Hankook Dynapro-HP series is a high-performance tire designed for luxury SUVs, with tread patterns that ensure excellent durability and low noise performance in all road conditions.
Was this review help?
4
4
Share
More Forum Discussions

What Are the Solutions for Frozen Windshield Washer Fluid in Winter?

The solutions for frozen windshield washer fluid in winter are: 1. Pour warm water into the washer fluid reservoir to help melt the ice; 2. Utilize the engine's heat to thaw the frozen washer fluid. The functions of windshield washer fluid include: 1. Cleaning debris off the windshield; 2. Lowering the freezing point of the liquid; 3. Ensuring the windshield remains clear and transparent for optimal visibility; 4. Eliminating static charges on the glass surface; 5. Reducing friction between the wipers and the glass to prevent scratches. The steps to add windshield washer fluid are: 1. Turn on the wiper switch, causing the washer fluid to spray from beneath the windshield; 2. Continue until the spray nozzles stop emitting fluid, then open the washer fluid cap and add a small amount of washer fluid; 3. Turn on the wiper switch again to clear out any remaining fluid; 4. When no more fluid sprays out, add 4 liters of washer fluid, then securely close the washer fluid cap.
15
2
Share

Can a vehicle still undergo annual inspection if the owner has passed away?

Can a vehicle still undergo annual inspection if the owner has passed away? The specific explanation is as follows: The death of the owner does not affect the vehicle inspection. Relatives or friends can handle the annual inspection on behalf of the owner. The vehicle management office should confirm the vehicle, review the submitted documents and certificates, and issue the inspection compliance mark within one day from the date of acceptance. Relevant information is introduced as follows: Article 11 of the Road Traffic Safety Law: When driving a motor vehicle on the road, the motor vehicle license plate must be displayed, the inspection compliance mark and insurance mark must be placed, and the motor vehicle driving license must be carried. The motor vehicle license plate must be displayed clearly and completely as required, and must not be deliberately obscured or damaged. No unit or individual may confiscate or detain the motor vehicle license plate. Article 13 of the Road Traffic Safety Law: For motor vehicles that are driven on the road after registration, regular safety technical inspections should be conducted according to laws and administrative regulations, depending on the vehicle's purpose, passenger and cargo capacity, service life, and other factors.
19
4
Share

What are the precautions for picking up a car at a 4S store?

Here are the precautions for picking up a car at a 4S store: 1. Check the paint surface for defects: When the car leaves the factory, the paint surface should be smooth and flawless, as new cars undergo inspection before leaving the factory. However, during transportation from the manufacturer to the 4S store, the car may suffer scratches. Some dealers may repaint it and sell it as new. Therefore, when picking up the car, it is essential to check if the paint surface is smooth and flawless. Any defects could indicate a repainted transport-damaged car. 2. Check the production date: If a car remains unsold for several months after leaving the factory, it becomes inventory stock. Always check the production date when picking up the car. 3. Check the buttons inside the car: Cars come with many configurations, and most functions are controlled by buttons inside the car. When picking up the car, it is important to test all buttons to ensure they are functioning properly. The best method is to open and experience all operable buttons.
20
2
Share

How to Lock the Car When the Key Fob Battery Dies?

Remove the mechanical key from the remote key fob, detach the decorative cover behind the driver's side door handle, and insert the mechanical key into the keyhole; Lock the central locking system to ensure the vehicle's parking safety, and promptly replace the remote key fob battery.
1
3
Share

What is the method for making a U-turn on the highway?

The method for making a U-turn on the highway is: 1. Find the exit to get off the highway; 2. Choose the desired direction and re-enter the highway. Precautions for highway driving include: 1. The driver and front-seat passenger should fasten their seat belts, and the driver should not answer phone calls; 2. Avoid making sharp turns with the steering wheel while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance; 4. Only use adjacent lanes for overtaking, and immediately return to the driving lane after overtaking. Vehicles must not ride or drive on the lane dividing lines; 5. Do not reverse, drive in the opposite direction, make U-turns or turns by crossing the central divider, conduct test drives or drive training vehicles, or overtake or park on ramps; 6. Maintain a following distance of more than 100 meters. When the speed is below 100 km/h, the distance from the vehicle ahead in the same lane can be appropriately shortened, but the minimum distance should not be less than 50 meters.
18
2
Share

What to Do When the Engine Tachometer Stops Working?

The solutions for a non-functioning engine tachometer are: 1. Replace the flexible shaft connection inside the tachometer; 2. Reinstall the tachometer needle; 3. Clean any foreign objects inside the instrument panel; 4. Replace the wiring inside the tachometer. The purposes of the engine tachometer: 1. To determine if the car is truly started; 2. To help the driver determine the right time to shift gears; 3. Mechanics can judge the car's condition based on the tachometer display when the engine is idling. The components of the engine: 1. Engine block group: cylinder head, cylinder block, and crankcase; 2. Crankshaft connecting rod mechanism: piston, connecting rod, crankshaft, flywheel; 3. Valve train and intake/exhaust system: intake valve, exhaust valve, tappet, pushrod, rocker arm, camshaft, and camshaft timing gear; 4. Fuel supply system and governor: fuel tank, sediment cup, diesel filter, fuel pump, injection pump, and governor; 5. Starting device: clutch mechanism, flywheel ring gear, starter switch, battery.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.