···
Log in / Register

What brand of tires does the Roewe i5 use?

4 Answers
DelZane
07/29/25 3:17am
The new-generation Roewe i5 comes with three tire size specifications: 195/65/R15, 205/55/R16, and 205/50/R17. Here, 195 indicates the tire width of 195mm, 65 represents the aspect ratio of 65%, R stands for radial tires, and 15 denotes the wheel size of 15 inches. Additionally, the Roewe i5 model is equipped with Michelin tires. Tire Material: The main component of tires is rubber. The maximum storage and anti-aging time for rubber, ranging from natural latex to ethylene propylene and nitrile, does not exceed 10 years. The average service life of various rubber products in use is 3-5 years. Tire Characteristics: Automotive tires have different characteristics depending on their intended use. Passenger car tires offer higher comfort, while off-road tires provide stronger road passability. When selecting a car, it's essential to consider the driving road conditions to avoid choosing the wrong tires, which could affect their performance.
Was this review help?
9
5
Share
Mason
08/12/25 1:42pm
I've been driving the Roewe i5 for over a year now, and the factory-fitted tires really depend on the specific year and configuration. My car is the 2021 mid-range automatic version, and it came with Maxxis MS1 tires on all four wheels. You might not have heard of this brand as much as Michelin, but they're quite durable for city driving. After 20,000 kilometers, the tread is still deep. A neighbor has the top-end i5 with Michelin Primacy 3 ST tires, and the noise reduction is noticeably better than mine, with more stable grip in the rain. When I bought the car, the salesperson mentioned that tire suppliers might adjust based on production batches, and Hankook Kinergy EX series is also common. I suggest you crouch down and check the lettering on the sidewall of your tires for the most accurate information. Oh, and remember, when changing tires, it's essential to use the same brand and tread pattern on the same axle for safety.
Was this review help?
13
0
Share
Expand All
WalterAnn
10/02/25 5:42am
Having observed many Roewe i5 vehicles, the tire configurations are quite interesting. The base models often use domestic brands like Linglong GreenMax, which offer good value for money but have slightly louder road noise. The mid-range versions commonly feature Maxxis MS1 or Hankook Kinergy EX series, striking a better balance in durability. The top-tier models are equipped with Michelin quiet tires. Last week, while helping a colleague inspect a used car, we encountered a special case—his 2019 model had two Lucky tires on the rear wheels, clearly replaced by the previous owner. So, don’t just rely on the configuration sheet; it’s more reliable to actually crouch down and check the sidewall markings. The original tire specifications are mostly 195/55 R16, with a tire pressure of around 2.4 bar for optimal comfort. If you’re looking to replace tires now, the Chaoyang SA37 in the same specification actually shows a noticeable improvement in noise reduction.
Was this review help?
4
0
Share
Expand All
DiHarper
11/15/25 7:25am
When it comes to the tires of the Roewe i5, the reality is more complicated. During maintenance at the 4S shop, I chatted with the repair technician. The manufacturer actually uses multiple suppliers interchangeably, meaning cars produced in the same month might randomly come with Maxxis, Hankook, or Michelin tires. The key is to ensure the tire parameters meet the load index of 91V and the speed rating of 210 km/h. One owner of a 2019 model drove 50,000 kilometers in three years, and the tread on the original Goodride tires was nearly worn out. After replacing them with two Continental UC6 tires, the braking distance was reduced by two meters directly. For tire replacement, it's recommended to stick with the original 195/55 R16 specification. Currently, the Goodyear Assurance Comfortred series also performs well in wet grip. Remember to check the tire pressure monthly, ensuring the error does not exceed 0.2 bar.
Was this review help?
3
5
Share
Expand All
More Forum Discussions

Where to Place the Jack for a Corolla?

The jack for the Corolla is located in the plastic casing at the lower right corner of the trunk; you can see it by prying it open. Below is some knowledge about the Corolla: Introduction: The Corolla, formerly known as the 'Corolla' (translated as 'Huaguan'), is a brand under Toyota Motor. The Corolla is equipped with Michelin 215/45-R17 tires, TRD-Sportivo high-performance shock absorbers, TRD-TF4 17-inch sport rims, reinforced clutches, and high-performance brake pads, ensuring it has relatively ideal sports performance. Space: The Corolla has also been lengthened in terms of body size, with its wheelbase reaching 2700mm after the extension. In terms of seating space, a tester who is 177cm tall adjusted the front seat to the lowest position and had a fist's worth of headroom. When the tester moved to the rear seat, there was two fingers' worth of headroom and one fist and three fingers' worth of legroom. The floor bulge in the middle of the Corolla's rear seat is very small.
20
5
Share

What are the causes of Audi sensor failure symptoms?

Here is an introduction to the failure symptoms of Audi sensors: Throttle Position Sensor: The throttle position sensor monitors the opening angle of the throttle to determine idle, full-load, and acceleration/deceleration conditions, thereby implementing fuel injection control corresponding to the throttle opening state. Failure effects: Idle speed fluctuates erratically, or may cause engine racing. Intake Manifold Pressure Sensor: The intake pressure sensor provides engine load information by measuring the pressure in the intake manifold, indirectly measuring the amount of air entering the engine, which is then converted into an electrical signal for the ECU. Failure effects: Difficulty starting the engine or unstable idle speed. Intake Air Temperature Sensor: Provides air temperature information to adjust fuel injection and ignition timing. Failure effects: Low idle speed and prone to stalling. Crankshaft Position Sensor: Provides engine speed and crankshaft phase information as reference points for fuel injection and ignition timing. Failure effects: Engine fails to start or suddenly stalls after starting.
13
3
Share

What is the method to reset the maintenance light on an older GL8?

Turn the key to position I while holding down the mileage reset button. Continue holding the mileage reset button for approximately 10 seconds. You will hear two beeps, indicating a successful reset.
7
4
Share

What to Do When All Vehicle Lights Suddenly Go Out During Night Driving?

When all vehicle lights suddenly go out during night driving, you should turn on the hazard warning flashers, gradually slow down, and pull over to the side of the road. Headlights must be turned on at night. When overtaking at night, it is advisable to increase the distance between vehicles appropriately. When driving at speeds above 30 km/h at night, high beams should be used.
18
0
Share

How to Remove Oil Film from Car by Yourself?

First, clean the car thoroughly, then apply detergent, scrub vigorously on the glass, and finally rinse with clean water or wipe with a damp towel. Toothpaste contains abrasives, and baking soda also has oil-removing properties.
10
3
Share

How to Determine if the Fuel Metering Unit is Damaged?

It will cut off the fuel injection to the engine, and continued use may cause the engine to malfunction. It may result in stalling or black smoke emissions. In the electronic fuel injection system, the fuel metering unit is an indispensable component.
5
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.