What brand of tires does the original GAC Trumpchi GS3 use?

How Long Does It Take to Polish and Wax a Car?

Car waxing is a common maintenance method. The time required for waxing generally depends on the method and technique used. Typically, mechanical waxing at a beauty shop takes about one and a half hours. If polishing and waxing are combined, the time will be extended to approximately three hours. Benefits of Car Polishing and Waxing: 1. Waterproofing Effect: Reduces watermarks, dark spots, rust, and damage on the paint surface. 2. Anti-Aging Effect: Reduces UV damage to the paint surface and extends the life of the paint. 3. Gloss Enhancement: Improves the smoothness of the car paint to varying degrees, making the body color more vibrant. 4. Anti-Static Effect: Reduces damage to the car paint caused by friction with dust, wool fabrics, synthetic fibers, etc., in the air. 5. Anti-Corrosion Effect: Effectively isolates acid rain and acid mist from damaging the car paint.

12

0

Share

Why does BYD DM-i not have a transmission?

BYD's DM-i technology is an improvement on Honda's i-MMD technology as pure electric vehicle technology continues to mature, relying more on batteries and electric motors, thus eliminating the transmission. Here is the relevant introduction from BYD: 1. It can meet the demand: If BYD needs rapid acceleration at high speeds, the electric motor will cooperate to drive, which can also meet the demand, but the efficiency of the motor will decrease at high speeds, making it difficult for DM-i technology to accelerate again at high speeds. 2. Economy: BYD is more suitable for urban use, and can also handle high-speed long-distance driving when necessary, but it does not meet the demand for aggressive driving. If long-term high-power driving conditions are required, such as prolonged ultra-high-speed driving, DM-i technology cannot handle it. 3. Adaptation to normal driving: Basically, DM-i technology vehicles will enter the engine direct drive state only when the speed is above 80. According to the standards designed for highways and roads, there cannot be large slopes at speeds above 80 km/h, and the speed cannot be maintained above 80 km/h when climbing large slopes, so this technology can adapt to normal driving needs without any problems.

12

5

Share

How to Determine When to Replace a Motorcycle Battery

Determining whether a car battery needs replacement can be done by examining the battery's appearance, checking the power indicator window, and measuring the battery voltage. Detailed methods are as follows: 1. Inspect the battery appearance: Carefully observe both sides of the car battery for noticeable swelling, deformation, or bulging. Check around the battery terminals for white or green powdery substances, which are battery oxides. High-quality or new batteries typically don't develop these oxides easily. Their appearance indicates the battery's performance is beginning to deteriorate. 2. Check the power indicator window: Statistics show over 80% of maintenance-free batteries have power indicator windows, usually displaying three colors: green, yellow, and black. Green indicates sufficient charge, yellow means slightly discharged, and black signals near failure requiring replacement (refer to battery label instructions). However, this method is only a reference - owners should combine it with other methods for comprehensive assessment. 3. Measure battery voltage: Use a battery tester or multimeter to measure voltage. Normally, a battery's no-load voltage should be around 13 volts, load voltage shouldn't drop below 12 volts, and starting voltage shouldn't be lower than 9.5 volts. Low voltage may cause difficult or failed engine starts.

20

2

Share

Is the Accelerator Used in Subject 2?

Subject 2 of the driving test does not require the use of the accelerator. Below are specific techniques for Subject 2 of the driving test: 1. Slow speed: Maintaining a slow speed is the most fundamental rule for practicing Subject 2. Ensure the vehicle doesn't stop while keeping the speed as slow as possible—the slower, the better. A slow speed allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, always adjust the rearview mirrors properly, which is particularly important for reverse parking and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During Subject 2 operations, it's essential to accurately locate these points and observe carefully to ensure precision. 4. Pay attention to the four corners of the car: The front corner during reverse parking can easily graze the outer line; the rear corner can easily graze the side lines of the parking space; the front corner during curve driving can easily cross the line; the front corner during a right-angle turn can easily cross the line; the front corner during parallel parking can easily graze the outer line or the left front corner of the parking space, while the right rear corner can easily graze the right parking space line. Therefore, always be mindful of the four corners and the outer boundary lines.

19

5

Share

How to Adjust the Driver's Seat to the Optimal Position?

Car seats generally have three adjustment methods: height adjustment, front-rear adjustment, and backrest adjustment. Extended information is as follows: 1. Height adjustment: This refers to the driver adjusting the seat height based on their own height and arm length. Everyone's driving habits and height are different, so the seat should be adjusted to the most comfortable position. First, depending on height, there should be at least a fist's distance between the head and the car roof. If the seat is adjusted too high, bumps during driving may cause the head to hit the roof. Secondly, the driver's visibility should be considered. The driver's line of sight should fall on the middle position of the front windshield, which is the optimal driving view. 2. Front-rear adjustment: This refers to the distance between the seat and the car pedals. Considering the driver's height, if the seat is too far from the pedals, the feet may not reach them, affecting the accuracy and force when stepping on the pedals. Therefore, the front-rear position of the seat must be adjusted to the most suitable distance. 3. Backrest adjustment: This refers to the inclination of the seat backrest. Generally, the more inclined the seat, the more comfortable it feels. However, excessive inclination can affect car control, so it should be adjusted to a suitable inclination to maintain the best driving condition.

19

0

Share

What Does Incorrect Use of Brake and Accelerator Pedals Mean?

Incorrect use of brake and accelerator pedals refers to not stepping on the brake when deceleration is required or mistakenly stepping on the accelerator, or not stepping on the accelerator when acceleration is needed or mistakenly stepping on the brake. Incorrect use of brake and accelerator pedals results in an immediate deduction of 100 points, leading to a direct failure. Additional information is as follows: 1. Starting in Subject 3: Upon hearing the voice prompt 'Please start,' depress the clutch, shift into first gear, turn on the left turn signal (for more than 3 seconds), simultaneously (turn head left) observe the left rearview mirror, confirm safety, sound the horn, release the parking brake, start smoothly, and straighten the turn signal. 2. Examination Conditions: According to Article 44 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses,' each subject is examined once. If the examination is failed, a retake is allowed once. If the retake is not attended or still results in failure, the examination is terminated, and the applicant must reschedule the examination. However, Subject 2 and Subject 3 examinations must be scheduled at least ten days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid.

5

1

Share

What brand of tires does the original GAC Trumpchi GS3 use?

How Long Does It Take to Polish and Wax a Car?

Why does BYD DM-i not have a transmission?

How to Determine When to Replace a Motorcycle Battery

Is the Accelerator Used in Subject 2?

How to Adjust the Driver's Seat to the Optimal Position?

What Does Incorrect Use of Brake and Accelerator Pedals Mean?

How many days does it take to check traffic violation results in Dongguan?

Does the Mazda3 Axela Not Come with Tire Pressure Monitoring?

Where is the Certificate Core Number?

What does the faucet-like light in a car indicate as a fault?