What brand of tires does the Mercedes-Benz E300L use?

1 Answers
Margot
07/29/25 8:39pm
The Mercedes-Benz E300L uses Bridgestone's TURANZA run-flat tires, with the original tire model being 245/45R18. Below is some relevant information about the Mercedes-Benz E-Class: 1. The Mercedes-Benz E-Class is a mid-to-high-end model in the Mercedes-Benz series, designed with the new Mercedes-Benz S-Class as its inspiration, leading many owners to refer to the new E-Class as a "mini S-Class." 2. To meet the diverse needs of consumers, the Mercedes-Benz E-Class offers a sporty grille, a sedan-style grille, long-wheelbase models, and standard-wheelbase models. The long-wheelbase models, in particular, align well with Chinese consumers' preferences and aesthetic views on cars. 3. The most notable highlight of the new-generation Mercedes-Benz E-Class is its interior design. Moving away from the extensive use of straight lines in older models, the new interior presents a more three-dimensional and luxurious center console effect, which is a key reason many owners favor Mercedes-Benz vehicles. 4. In terms of powertrain, the car's previous 2.0T low-power engine (coded M274) has been replaced by a 1.5T engine with a 48V mild hybrid system. 5. For transmission, it is paired with a 9-speed automatic transmission, available in both four-wheel-drive and two-wheel-drive configurations. The engine delivers a maximum power of 135 kW and a maximum torque of 160 Nm. Thanks to the kinetic energy recovery system, it further enhances fuel efficiency and reduces fuel consumption.
Was this review help?
17
0
Share
More Forum Discussions

Which engine does the Lynk & Co 05 use?

As a new coupe SUV, the Lynk & Co 05 is equipped with a Drive-E series 2.0TD turbocharged high-power engine, which is also a four-cylinder engine. Here is some information about the Lynk & Co 05: 1. Power: It features a powertrain consisting of a Volvo-sourced 2.0T engine paired with an 8AT transmission. The 2.0T four-cylinder high-power engine delivers a maximum power output of 238 horsepower, mated to an 8AT transmission. 2. Transmission: The Lynk & Co 05 is equipped with an Aisin 8-speed automatic transmission, which adopts a longitudinal layout and weighs 96kg.
18
3
Share

What causes sudden clutch failure in the Baojun 730?

Solutions for sudden clutch failure in the Baojun 730 are as follows: 1. In such emergency situations, if conditions permit, it is best to have a rescue vehicle handle the situation. 2. If special circumstances make a rescue vehicle unavailable, first engage the third gear while the engine is off. Then, ensuring there is sufficient safety distance ahead, start the ignition and use the starter motor's power to forcibly start the vehicle. At this point, the car will experience a significant jerk—do not press the brake. Immediately coordinate with the accelerator to get the car moving, and adjust the gears based on the engine's RPM. That is, after starting, accelerate until you feel the engine RPM is high, then quickly shift to a higher gear.
2
4
Share

How long does a normal car battery last?

A car battery typically has a service life of 3 to 4 years. Here is additional information: 1. Batteries are most vulnerable to low temperatures. In cold environments, a battery's capacity is significantly lower than at normal temperatures. 2. Avoid leaving your car parked in open parking lots for extended periods. If long-term parking is necessary, remove the battery to prevent freezing damage. 3. Car engines are harder to start in winter. Each starting attempt should not exceed 5 seconds, with at least 15 seconds between subsequent attempts. 4. Car batteries require regular charging. If left unused for long periods, they will gradually self-discharge until becoming unusable. Therefore, start the car periodically to recharge the battery.
15
5
Share

Why is 92 octane gasoline recommended for a compression ratio of 13?

This situation mainly occurs in Mazda engines, which have a compression ratio of 13 but can use 92 octane gasoline. This is primarily because the engine has been structurally designed specifically for lower octane gasoline, and engines without such design cannot adopt this approach. More reasons are explained as follows: 1. Reason one: To reduce engine knocking, this engine features a specially designed exhaust manifold. The long exhaust manifold design is used to minimize the impact of exhaust heat on the combustion chamber temperature. 2. Reason two: The engine also reduces the temperature of the piston and combustion chamber by installing an oil spray nozzle under the piston, preventing knocking caused by high temperatures and the relatively poor anti-knock properties of 92 octane gasoline. 3. Reason three: This mainly applies to Mazda engines with special designs. For ordinary engines with a compression ratio of 13, 95 octane gasoline should be used.
18
3
Share

What is the intake manifold pressure?

Intake manifold pressure is normally between 40 and 80 kPa. When the engine is running, during the intake stroke, the downward movement of the piston creates a suction effect, causing the intake manifold pressure to be lower than atmospheric pressure. The intake manifold is usually made of plastic. Since PA has lower thermal conductivity than aluminum, the fuel injectors and incoming air temperature are lower. The main factors affecting intake manifold pressure are as follows: 1. Throttle opening: The smaller the throttle opening, the greater the suction effect created by the piston during intake, resulting in higher vacuum suction in the intake manifold, meaning lower intake manifold pressure. 2. Sealing performance: This includes the sealing of the intake manifold and cylinders. Better sealing performance leads to a greater suction effect created by the piston during intake, resulting in higher vacuum suction in the intake manifold, meaning lower intake manifold pressure.
18
5
Share

What Does the Left Foot Control in a Manual Transmission?

Left foot controls the clutch pedal. The clutch pedal has functions and working principles. Functions of the clutch pedal: Through proper operation by the driver, it achieves the engagement and disengagement between the front and rear parts of the clutch (engine and transmission). It indirectly enables: starting, gear shifting, reversing, and braking. Working principle: The clutch consists of friction plates, spring plates, pressure plates, and power output shafts, arranged between the engine and the gearbox. It transmits the torque stored on the engine flywheel to the transmission, ensuring that the vehicle delivers appropriate driving force and torque to the drive wheels under different driving conditions, falling under the category of the powertrain. During semi-engagement, the clutch allows a speed difference between the power input end and the power output end, meaning it transmits the appropriate amount of power through this speed difference.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.